Instrukcja obsługi Generac G0080250

Generac generator G0080250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Generac G0080250 (48 stron) w kategorii generator. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/48
Generac GB1000 and GB2000
Portable Power Station
Owners Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE
(000209b)
WARNING
Loss of life. This product is not intended to
be used in a critical life support application.
Failure to adhere to this warning could result
in death or serious injury.
Register your Generac product at:
WWW.GENERAC.COM
1-888-GENERAC
(1-888-436-3722)
MODEL:________________________
SERIAL:________________________
DATE PURCHASED:______________
Table of Contents
Section 1 Introduction and Safety ..................................................................1
Introduction ........................................................................................................ 1
Safety Rules ....................................................................................................... 1
Important Alerts ..................................................................................................1
FCC Statement ..................................................................................................2
Section 2 General Information and Setup ......................................................3
What’s Included ..................................................................................................4
Know Your Power Station ..................................................................................4
Know Power Station Limits ................................................................................ 6
Estimated Operating Time .................................................................................6
Section 3 Operation .........................................................................................7
Operation and Use Questions ............................................................................7
General Use .......................................................................................................7
Using the Power Station (Discharging) .............................................................. 7
Charging the Power Station ...............................................................................7
Simultaneous Charge Inputs ..............................................................................8
Pass-Through Charging .....................................................................................8
Parallel Connection ............................................................................................8
Transportation ....................................................................................................9
Section 4 Maintenance and Troubleshooting ..............................................10
Product Maintenance .......................................................................................10
Storage ............................................................................................................10
Disposal ...........................................................................................................10
FAQ ..................................................................................................................10
Troubleshooting ...............................................................................................10
Notes ................................................................................................................12
(000393a)
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
Owner’s Manual for Power Station 1
Section 1 Introduction and Safety
Introduction
Read This Manual Thoroughly
If any section of this manual is not understood,
contact the nearest Independent Authorized
Service Dealer (IASD) or Generac Customer
Service at 1-888-436-3722 (1-888-GEN-
ERAC), or visit www.generac.com for start-
ing, operating, and servicing procedures. The
owner is responsible for proper maintenance
and safe use of the unit.
SAVE THESE INSTRUCTIONS for future ref-
erence. This manual contains important
instructions that must be followed during
placement, operation, and maintenance of the
unit and its components. Always supply this
manual to any individual that will use this unit,
and instruct them on how to correctly start,
operate, and stop the unit in case of emer-
gency.
The information in this manual is accurate
based on products produced at the time of
publication. The manufacturer reserves the
right to make technical updates, corrections,
and product revisions at any time without
notice.
Safety Rules
The manufacturer cannot anticipate every
possible circumstance that might involve a
hazard. The alerts in this manual, and on tags
and decals affixed to the unit, are not all inclu-
sive. If using a procedure, work method, or
operating technique that the manufacturer
does not specifically recommend, verify that it
is safe for others and does not render the
equipment unsafe.
Throughout this publication, and on tags and
decals affixed to the unit, DANGER, WARN-
ING, CAUTION, and NOTE blocks are used to
alert personnel to special instructions about a
particular operation that may be hazardous if
performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
NOTE: Notes contain additional information
important to a procedure and will be found
within the regular text of this manual.
These safety alerts cannot eliminate the haz-
ards that they indicate. Common sense and
strict compliance with the special instructions
while performing the action or service are
essential to preventing accidents.
Important Alerts
Electrical Hazards
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
(000104)
DANGER
Electrocution. Water contact with a power source,
if not avoided, will result in death or serious injury.
(000756)
DANGER
Electrocution. Contact with bare wires,
terminals, and connections will result in death
or serious injury.
(000145)
DANGER
Electrocution. In the event of electrical accident,
immediately shut power OFF. Use non-conductive
implements to free victim from live conductor. Apply
first aid and get medical help. Failure to do so will
result in death or serious injury.
(000482)
Electrocution. Never charge a battery in wet
conditions. Doing so could result in death, serious
injury, equipment or property damage.
WARNING
WARNING
Electrocution. Never operate this unit in wet conditions,
and always store it under a cover or in a dry location.
Failure to do so could result in death, serious injury, or
equipment or property damage.
(000713a)


Specyfikacje produktu

Marka: Generac
Kategoria: generator
Model: G0080250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Generac G0080250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje generator Generac

Generac

Generac QT03624KNAX Instrukcja

14 Października 2024
Generac

Generac G0076760 Instrukcja

8 Października 2024
Generac

Generac G0072101 Instrukcja

8 Października 2024
Generac

Generac G0072240 Instrukcja

8 Października 2024
Generac

Generac RA01522L Instrukcja

8 Października 2024
Generac

Generac G0076730 Instrukcja

8 Października 2024
Generac

Generac G0080250 Instrukcja

8 Października 2024
Generac

Generac RA02022L Instrukcja

8 Października 2024
Generac

Generac RG06045C Instrukcja

8 Października 2024
Generac

Generac G0072280 Instrukcja

8 Października 2024

Instrukcje generator

Najnowsze instrukcje dla generator

Ferm

Ferm PGM1006 Instrukcja

13 Października 2024
AL-KO

AL-KO 3500-C Instrukcja

12 Października 2024
Fuxtec

Fuxtec FX-IG13 Instrukcja

12 Października 2024
DeWalt

DeWalt DXGNR4000 Instrukcja

10 Października 2024
ThermaSol

ThermaSol TFXA-390 Instrukcja

9 Października 2024
ThermaSol

ThermaSol TFXM-390 Instrukcja

9 Października 2024
DeWalt

DeWalt DXGN4500 Instrukcja

9 Października 2024
DeWalt

DeWalt DXGN7200 Instrukcja

9 Października 2024
Einhell

Einhell BT-PG 2000/2 Instrukcja

9 Października 2024
Anova

Anova GC5500TFE Instrukcja

8 Października 2024