Instrukcja obsługi Generac G0088940

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Generac G0088940 (80 stron) w kategorii Hogedrukreiniger. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/80
SAVE THIS MANUAL FOR FUTURE REFERENCE
Power Washer
Owners Manual
MODEL:________________________
SERIAL:________________________
DATE PURCHASED:______________
Register your Generac product at:
register.generac.com
1-888-922-8482
Table of Contents
Section 1: Introduction and Safety
Introduction ..................................... 1
Safety Rules .................................... 1
Safety Symbols and Meanings ........ 2
Section 2: General Information and
Setup
Know Your Power Washer .............. 3
Emissions ........................................ 3
Remove Contents from Carton ....... 3
Assembly ......................................... 3
Add Engine Oil ................................ 5
Fuel ................................................. 5
Water Supply ................................... 5
Connect Water Supply .................... 6
Connect High-Pressure Hose and
Lance .............................................. 6
Spray Gun ....................................... 6
Detergent Tank (if equipped) .......... 7
Nozzles ........................................... 7
Section 3: Operation
Operation and Use Questions ......... 8
Before Starting Engine .................... 8
Prepare Power Washer for Use ...... 8
Electric Start .................................... 9
Power Washer Start-Up .................. 9
Power Washer Shut Down ............ 10
Apply Detergent ............................ 10
Rinsing .......................................... 10
Clean Detergent Siphoning Tube .. 11
Automatic Cool Down System (Ther-
mal Relief) ..................................... 11
Optional Accessories (not included
with all models) ............................. 11
PowerDial™ Gun (if equipped) ..... 11
Section 4: Maintenance and
Troubleshooting
Maintenance ..................................13
Maintenance Schedule ..................13
Pump Oil ........................................13
Preventive Maintenance ................13
Engine Maintenance ......................14
Service Spark Plug ........................15
Maintaining the Battery ..................17
Storage ..........................................17
Troubleshooting .............................19
Notes .............................................20
(000759a)
CALIFORNIA WARNING
Can expose you to benzene, a carcinogen
and reproductive toxicant
www.P65Warnings.ca.gov.
Introduction and Safety
Owner’s Manual for Power Washer 1
Section 1: Introduction and Safety
Introduction
Read This Manual Thoroughly
If any section of this manual is not understood,
contact the nearest Independent Authorized
Service Dealer (IASD) or Generac Customer
Service at 1-888-436-3722 (1-888-
GENERAC), or visit www.generac.com for
starting, operating, and servicing procedures.
The owner is responsible for proper
maintenance and safe use of the unit.
SAVE THESE INSTRUCTIONS for future
reference. This manual contains important
instructions that must be followed during
placement, operation, and maintenance of the
unit and its components. Always supply this
manual to any individual that will use this unit,
and instruct them on how to correctly start,
operate, and stop the unit in case of
emergency.
The information in this manual is accurate
based on products produced at the time of
publication. The manufacturer reserves the
right to make technical updates, corrections,
and product revisions at any time without
notice.
Safety Rules
The manufacturer cannot anticipate every
possible circumstance that might involve a
hazard. The alerts in this manual, and on tags
and decals affixed to the unit, are not all
inclusive. If using a procedure, work method,
or operating technique that the manufacturer
does not specifically recommend, verify that it
is safe for others and does not render the
equipment unsafe.
Throughout this publication, and on tags and
decals affixed to the unit, DANGER,
WARNING, CAUTION, and NOTE blocks are
used to alert personnel to special instructions
about a particular operation that may be
hazardous if performed incorrectly or
carelessly. Observe them carefully. Alert
definitions are as follows:
NOTE: Notes contain additional information
important to a procedure and will be found
within the regular text of this manual.
These safety alerts cannot eliminate the
hazards that they indicate. Common sense
and strict compliance with the special
instructions while performing the action or
service are essential to preventing accidents.
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.

Specyfikacje produktu

Marka: Generac
Kategoria: Hogedrukreiniger
Model: G0088940

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Generac G0088940, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Hogedrukreiniger Generac

Generac

Generac G00888700 Instrukcja

8 Października 2024
Generac

Generac G0079540 Instrukcja

8 Października 2024
Generac

Generac G0088940 Instrukcja

8 Października 2024

Instrukcje Hogedrukreiniger

Najnowsze instrukcje dla Hogedrukreiniger

Anova

Anova H1800 Instrukcja

8 Października 2024
Anova

Anova H1950 Instrukcja

8 Października 2024
Vonroc

Vonroc PW509AC Instrukcja

8 Października 2024
DeWalt

DeWalt DXPW3835 Instrukcja

8 Października 2024
DeWalt

DeWalt DCPW1000 Instrukcja

8 Października 2024
Simpson

Simpson CM61351 Instrukcja

5 Października 2024
Jet-USA

Jet-USA CX760 Instrukcja

5 Października 2024
CMI

CMI HDR 100 Instrukcja

5 Października 2024
MacAllister

MacAllister MAC155XTRA Instrukcja

5 Października 2024
MacAllister

MacAllister MAC150XT Instrukcja

4 Października 2024