Instrukcja obsługi Gemini TT-2000

Gemini Sprzęt DJ-ski TT-2000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gemini TT-2000 (12 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

OPERATIONS MANUAL

BEDIENUNGSHANDBUCH

MANUAL DEL OPERADOR

MANUEL D’INSTRUCTIONS

DIRECT DRIVE STRAIGHT ARM TURNTABLE

PLATTENSPIELER MIT DIREKTANTRIEB UND GERADEM TONARM

GIRADISCOS DE BRAZO RECTO TRACCIÓN DIRECTA

PLATINE VINYLE AVEC ENTRAÎNEMENT DIRECT ET BRAS DROIT

(

((2

22)

)

))

CAUTION: This product satisfies FCC regulations when shielded cables and connec-

tors are used to connect the unit to other equipment. To prevent electromagnetic

interference with electric appliances such as radios and televisions, use shielded

cables and connectors for connections.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

The lightening flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage” with-

in the product’s enclosure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

READ INSTRUCTIONS: All the safety and operating instructions should be read

before the product is operated.

RETAIN INSTRUCTIONS: The safety and operating instructions should be retained

for future reference.

HEED WARNINGS: All warnings on the product and in the operating instructions

should be adhered to.

FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.

CLEANING: The product should be cleaned only with a polishing cloth or a soft dry

cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids

since they may corrode the cabinet.

ATTACHMENTS: Do not use attachments not recommended by the product manu-

acturer as they may cause hazards.

WATER AND MOISTURE: Do not use this product near water, for example, near a

bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a

swimming pool; and the like.

ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, brack-

et, or table. The product may fall, causing serious injury to a child or adult, and

serious damage to the product. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the product. Any mounting of the

product should follow the manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

CART: A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart combina-

tion to overturn. See Figure A.

VENTILATION: Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from overheating, and

these openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface. This

product should not be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s instructions have been

adhered to.

POWER SOURCES: This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power sup-

ply to your home, consult your product dealer or local power company.

LOCATION: The appliance should be installed in a stable location.

NON-USE PERIODS: The power cord of the appliance should be unplugged from the

outlet when left unused for a long period of time.

GROUNDING OR POLARIZATION:

• If this product is equipped with a polarized alternating current line plug (a plug

having one blade wider than the other), it will fit into the outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety purpose of the polarized

plug.

• If this product is equipped with a three-wire grounding type plug, a plug having

a third (grounding) pin, it will only fit into a grounding type power outlet. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your elec-

trician to replace your obsolete outlet. Do not defeat the safety purpose of the

grounding type plug.

POWER-CORD PROTECTION: Power-supply cords should be routed so that they

are not likely to be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is con-

nected to the product, be sure the antenna or cable system is grounded so as to

provide some protection against voltage surges and built-up static charges. Article

810 of the National Electrical Code, ANSI/NFPA 70, provides information with

regard to proper grounding of the mast and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode. See Figure B.

LIGHTENING: For added protection for this product during a lightening storm, or

when it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage

to the product due to lightening and power-line surges.

POWER LINES: An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

OVERLOADING: Do not overload wall outlets, extension cords, or integral conven-

ience receptacles as this can result in a risk of fire or electric shock.

OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out parts

that could result in a fire or electric shock. Never spill liquid of any kind on the

product.

SERVICING: Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servic-

ing to qualified service personnel.

DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an

improper adjustment of other controls may result in damage and will often require

extensive work by a qualified technician to restore the product to its normal oper-

ation.

• If the product has been dropped or damaged in any way.

• When the product exhibits a distinct change in performance, this indicates a

need for service.

REPLACEMENT PARTS: When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

SAFETY CHECK: Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in

proper operating condition.

WALL OR CEILING MOUNTING: The product should not be mounted to a wall or

ceiling.

HEAT: The product should be situated away from heat sources such as radiators,

heat registers, stoves, or other products (including amplifiers) that produce heat.

MULTI LANGUAGE INSTRUCTIONS

ENGLISH...........................................................................................................................................................................................................................................................................PAGE 4

DEUTSCH............................................................................................................................................................................................................................................................................PAGE 6

ESPAÑOL.....................................................................................................................................................................................................................................................................................................................................................................PAGE 8

FRANCAIS....................................................................................................................................................................................................................................................................................................................................................................PAGE 10