Instrukcja obsługi Gemini GEM-08USB

Gemini system hi-fi GEM-08USB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gemini GEM-08USB (22 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/22
GEM-5USB & GEM-8USB
Portable Mixing Console
Empower Your Sound.
2GEM-5USB & GEM-8USB
PORTABLE MIXING CONSOLE
ENGLISH
2. Introduction
2. Befor You Begin
2. Features
9. Specifications
10. Legal & Safety
SPANISH
12. Introduction
10. In The Box
11. Specification
11. Features
13. Legal & Safety
Introduction
Congratulations! With the mixer you have purchased a state-of-the-art mixing
console that sets new standards. Our prime goal when develping the mixer was
to design a console that can be used for a great variety of applications. And to
give you maximum flexibility. In combination with its comprehensive range of
features and pro-level connections, the mixer will be your perfect tool for any
kind of application: broadcasting, video dubbing or giving the sound of your
band its finishing touch.
1. Before You Begin
Your mixer was carefully packed and the packaging is designed to protect
the unit from rough handling. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of physical damage, which
may have occurred during transit.
Be sure that there is enough space around the unit for cooling and please do
not place the mixer on any hot surface.
2. GEM-08USB 8 Channel Mixer Control Elements
1. MIC Use this balanced XLR jack to connect a microphone to the mixer.
• The phantom power required for condenser mics can be activated with
switch PHANTOM
3
2. Channel 1 features an additional LINE 1 input on a balanced 1/4” jack.
3. Use the GAIN control to adjust the input gain. This control should always
be turned fully counterclock wise when ever you connect or disconnect a
signal source to one of the inputs.
4. In addition, the mono channels are equipped with a steep LOW CUT filter
(slope at 18 dB/oct, -3 dB at 75 Hz) designed to eliminate unwanted low-
frequency signal components.
5. The upper (HIGH) and the lower band (LOW) are shelving filters that
increase or decrease all frequencies above or below their cut-o frequency.
The cut-o frequencies of the upper and lower band are 12 kHz and 80
Hz respectively. The MID band is configured as a peak filter with a center
frequency of 2.5 kHz.
6. EFF sends enable you to feed signals via a variable control from one or
more channels and sum these signals to a bus. The bus appears at the
console’s EFF sent output and can be fed from there to an external eects
device. The return from the eects unit is then brought back into the
console on the stereo channels. Each EFF send is mono and features up to
+10 dB gain.
7. The PAN control determines the position of the channel signal within the
stereo image. This control features a constant-power characteristic, which
means the signal is always maintained at a constant Level, irrespective of
position in the stereo panorama.
8. The PK LED’s of the mono channels illuminate when the input signal is
driven too high, which could cause distortion. If this happens, use the GAIN
control to reduce the preamp level until the LED does not light anymore.
9. The LEVEL control determines the level of the channel signal in the main
mix.
10. LINE IN Each stereo channel has two balanced line level inputs on 1/4” jacks
for left (L/MONO) and right (R) channels. If you use only the (L/MONO)
jack , the same sound is output from both Left and right speakers.
11. 7/8 AUX RET the STEREO AUX RETURN connectors are used to bring the
output of the external eects device (whose input is derived from the aux
sends) back into the console. You can instead use these connectors as
additional inputs, but any eects device will then have to be brought back
into the console via a normal stereo channel. This does, however, give you
the ability to use the channel EQ on the eects return signal if you wish.
12. The EFF SEND control adjusts the volume level of the EFF signal provided
at connector EFF SEND.

Specyfikacje produktu

Marka: Gemini
Kategoria: system hi-fi
Model: GEM-08USB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gemini GEM-08USB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Gemini

Gemini

Gemini UHF-04 Instrukcja

20 Września 2024
Gemini

Gemini AS-12TOGO Instrukcja

20 Września 2024
Gemini

Gemini MPA-3600 Instrukcja

16 Września 2024
Gemini

Gemini PA-SYS15 Instrukcja

15 Września 2024
Gemini

Gemini AS-15BLU-LT Instrukcja

15 Września 2024
Gemini

Gemini SOSP-8MOBC Instrukcja

14 Września 2024
Gemini

Gemini AS-2112BT Instrukcja

14 Września 2024
Gemini

Gemini BRS-430 Instrukcja

14 Września 2024
Gemini

Gemini AS-10TOGO Instrukcja

14 Września 2024
Gemini

Gemini GD-L115BT Instrukcja

14 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

Philips

Philips TAM3205M2 Instrukcja

14 Stycznia 2025
Philips

Philips TAM3505M2 Instrukcja

14 Stycznia 2025
OSD Audio

OSD Audio Nero Stream ARC Instrukcja

14 Stycznia 2025
Morel

Morel SUB-8X Instrukcja

14 Stycznia 2025
Morel

Morel BEAT-X Instrukcja

14 Stycznia 2025
Morel

Morel Sopran 634 Instrukcja

14 Stycznia 2025
Klipsch

Klipsch HD Theater 500 Instrukcja

14 Stycznia 2025
Lenco

Lenco MC-129 MP3 Instrukcja

13 Stycznia 2025
Terratec

Terratec HA-1 Charge Instrukcja

13 Stycznia 2025
Thomson

Thomson MIC400BT Instrukcja

12 Stycznia 2025