Instrukcja obsługi Gemini GEM-05USB

Gemini Konsola miksująca GEM-05USB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gemini GEM-05USB (22 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/22
GEM-5USB & GEM-8USB
Portable Mixing Console
Empower Your Sound.
2GEM-5USB & GEM-8USB
PORTABLE MIXING CONSOLE
ENGLISH
2. Introduction
2. Befor You Begin
2. Features
9. Specifications
10. Legal & Safety
SPANISH
12. Introduction
10. In The Box
11. Specification
11. Features
13. Legal & Safety
Introduction
Congratulations! With the mixer you have purchased a state-of-the-art mixing
console that sets new standards. Our prime goal when develping the mixer was
to design a console that can be used for a great variety of applications. And to
give you maximum flexibility. In combination with its comprehensive range of
features and pro-level connections, the mixer will be your perfect tool for any
kind of application: broadcasting, video dubbing or giving the sound of your
band its finishing touch.
1. Before You Begin
Your mixer was carefully packed and the packaging is designed to protect
the unit from rough handling. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of physical damage, which
may have occurred during transit.
Be sure that there is enough space around the unit for cooling and please do
not place the mixer on any hot surface.
2. GEM-08USB 8 Channel Mixer Control Elements
1. MIC Use this balanced XLR jack to connect a microphone to the mixer.
• The phantom power required for condenser mics can be activated with
switch PHANTOM
3
2. Channel 1 features an additional LINE 1 input on a balanced 1/4” jack.
3. Use the GAIN control to adjust the input gain. This control should always
be turned fully counterclock wise when ever you connect or disconnect a
signal source to one of the inputs.
4. In addition, the mono channels are equipped with a steep LOW CUT filter
(slope at 18 dB/oct, -3 dB at 75 Hz) designed to eliminate unwanted low-
frequency signal components.
5. The upper (HIGH) and the lower band (LOW) are shelving filters that
increase or decrease all frequencies above or below their cut-o frequency.
The cut-o frequencies of the upper and lower band are 12 kHz and 80
Hz respectively. The MID band is configured as a peak filter with a center
frequency of 2.5 kHz.
6. EFF sends enable you to feed signals via a variable control from one or
more channels and sum these signals to a bus. The bus appears at the
console’s EFF sent output and can be fed from there to an external eects
device. The return from the eects unit is then brought back into the
console on the stereo channels. Each EFF send is mono and features up to
+10 dB gain.
7. The PAN control determines the position of the channel signal within the
stereo image. This control features a constant-power characteristic, which
means the signal is always maintained at a constant Level, irrespective of
position in the stereo panorama.
8. The PK LED’s of the mono channels illuminate when the input signal is
driven too high, which could cause distortion. If this happens, use the GAIN
control to reduce the preamp level until the LED does not light anymore.
9. The LEVEL control determines the level of the channel signal in the main
mix.
10. LINE IN Each stereo channel has two balanced line level inputs on 1/4” jacks
for left (L/MONO) and right (R) channels. If you use only the (L/MONO)
jack , the same sound is output from both Left and right speakers.
11. 7/8 AUX RET the STEREO AUX RETURN connectors are used to bring the
output of the external eects device (whose input is derived from the aux
sends) back into the console. You can instead use these connectors as
additional inputs, but any eects device will then have to be brought back
into the console via a normal stereo channel. This does, however, give you
the ability to use the channel EQ on the eects return signal if you wish.
12. The EFF SEND control adjusts the volume level of the EFF signal provided
at connector EFF SEND.

Specyfikacje produktu

Marka: Gemini
Kategoria: Konsola miksująca
Model: GEM-05USB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gemini GEM-05USB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konsola miksująca Gemini

Gemini

Gemini CDM-3700G Instrukcja

15 Września 2024
Gemini

Gemini MM-3000 Instrukcja

14 Września 2024
Gemini

Gemini GEM-05USB Instrukcja

13 Września 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

American Audio

American Audio Q-D6 Instrukcja

15 Stycznia 2025
ADB

ADB ME1163 Instrukcja

15 Stycznia 2025
Samson

Samson L1200 Instrukcja

14 Stycznia 2025
Samson

Samson MDR624 Instrukcja

14 Stycznia 2025
Konig

Konig KN-DIGICON20 Instrukcja

11 Stycznia 2025
Vonyx

Vonyx STM500BT Instrukcja

11 Stycznia 2025
Rane

Rane Sixty-Four Instrukcja

11 Stycznia 2025
Wharfedale

Wharfedale SL 1224 USB Instrukcja

11 Stycznia 2025
Glemm

Glemm MXD 08 Instrukcja

10 Stycznia 2025
Alfatron

Alfatron ALF-VMix41 Instrukcja

8 Stycznia 2025