Instrukcja obsługi GE JBP70BKBB

GE piec JBP70BKBB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GE JBP70BKBB (12 stron) w kategorii piec. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
1
31-10620-1 11-06 JR
Installation
Free-Standing
Instructions Electric Ranges
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
• IMPORTANT —Save these
instructions for local inspector’s use.
• IMPORTANT —Observe all
governing codes and ordinances.
•Note to Installer – Be sure to leave these
instructions with the Consumer.
•Note to Consumer – Keep these
instructions for future reference.
•Skill level – Installation of this appliance
requires basic mechanical skills.
•Completion time – 1 to 3 hours
•Proper installation is the responsibility of
the installer.
•Product failure due to improper installation
is not covered under the Warranty.
WARNING —This appliance must
be properly grounded.
FOR YOUR SAFETY:
WARNING —Before beginning the
installation, switch power off at service panel
and lock the service disconnecting means to
prevent power from being switched on
accidentally. When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
ANTI-TIP DEVICE
WARNING —To reduce the risk
of tipping, the appliance must be secured by
properly installed Anti-Tip bracket packed
with this appliance.
If the Anti-Tip device supplied with the range
does not fit this application, use the universal
Anti-Tip device WB2X7909.
WARNING —
• All ranges can tip
• Injury to persons could result
• Install Anti-Tip bracket packed
with range
• See Installation Instructions
If you pull the range out and away from the
wall for any reason, make sure the Anti-Tip
bracket is engaged when the range is pushed
back against the wall.
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
TOOLS YOU WILL NEED
FOR YOUR SAFETY:
All rough-in and spacing dimensions must be
met for safe use of your range. On ranges
with storage drawers electricity can be
disconnected at the outlet without moving
the range if the outlet is in the preferred
location (remove storage drawer).
To reduce the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can
be reduced by installing a range hood that
sticks out at least 5” beyond the front of the
cabinets. Cabinets installed above a cooktop
must be no deeper than 13”.
Be sure your appliance is properly installed
and grounded by a qualified technician.
Make sure the cabinets and wall coverings
around the range can withstand the temperatures
(up to 200°F) generated by the range.
2
Installation Instructions
PREPARE TO INSTALL THE RANGE
MATERIALS YOU MAY NEED
Anchor SleevesLag Bolts
(For Anti-Tip Bracket Mounted
on Concrete Floors Only)
3-Wire Cord
4‘ Long
4-Wire Cord OR
4‘ Long
(UL Approved 40 AMP)
Adjustable Wrench
Level
1/4” Nut Driver
Phillips Screwdriver
Drill with 1/8” Bit
Pencil
Safety Glasses
Tape Measure
Pliers
Flat-blade
Screwdriver
PARTS INCLUDED
Anti-Tip Bracket Kit
REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.
1
Squeeze Connector
(For Conduit
Installations Only)
Tin Snips
3
Installation Instructions
PREPARE THE OPENING
See illustrations for all rough-in and spacing
dimensions.
The range may be placed with 0” clearance
(flush) at the back wall and side walls of
the cabinet.
NOTE: Use a 4′power cord to prevent
interference with the storage drawer.
Power cords 41 ⁄2to 6′long may have to be
dressed to allow for proper drawer closing.
MINIMUM DIMENSIONS BETWEEN COOKTOP,
WALLS AND ABOVE THE COOKTOP:
***Make sure the wall covering, countertop,
flooring and cabinets around the range
can withstand the heat (up to 200°F)
generated by the range.
*** Allow 30” minimum clearance between
surface units and bottom of unprotected
wood or metal cabinet, and 15” minimum
between countertop and adjacent cabinet
bottom.
*** Recommended spacing to heat-sensitive
surfaces.
2
21⁄2”
21⁄ ”2
71⁄ ”2
25”
36”
30”
Acceptable electrical
outlet area.
Orient the electrical
receptacle so the length
is parallel to the floor.
*0”
**15” Min.
**30” Min.
*0”
***6”
Min.
7”
141⁄ ”2
On models with baking or
warming drawers, electrical
outlet must not be in this
area.

Specyfikacje produktu

Marka: GE
Kategoria: piec
Model: JBP70BKBB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z GE JBP70BKBB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piec GE

GE

GE JGS760FPDS Instrukcja

19 Września 2024
GE

GE GGF600AVFS Instrukcja

31 Maja 2024
GE

GE JGBS61DPBB Instrukcja

29 Maja 2024
GE

GE Profile Performance JGP962CECCC Instrukcja

29 Maja 2024
GE

GE JGBS04PPMWW Instrukcja

29 Maja 2024
GE

GE JB640DFWW Instrukcja

28 Maja 2024
GE

GE Profile PB910SPSS Instrukcja

28 Maja 2024
GE

GE GRF600AVWW Instrukcja

28 Maja 2024
GE

GE ZGU48N6RWSS Instrukcja

28 Maja 2024
GE

GE JB855DPBB Instrukcja

27 Maja 2024

Instrukcje piec

Najnowsze instrukcje dla piec

Asko

Asko HG1935 Instrukcja

28 Października 2024
Asko

Asko HI16111G Instrukcja

28 Października 2024
Asko

Asko HI17111G Instrukcja

28 Października 2024
Asko

Asko OCS8456S Instrukcja

28 Października 2024
Asko

Asko HI 1794 M Instrukcja

27 Października 2024
Kenmore

Kenmore 664.42783 Instrukcja

21 Października 2024
Gaggenau

Gaggenau CA082010 Instrukcja

12 Października 2024
Gaggenau

Gaggenau BO 220-131 Instrukcja

11 Października 2024
Signature

Signature STV4F Instrukcja

11 Października 2024
Miele

Miele KM 7404 FX Instrukcja

9 Października 2024