Instrukcja obsługi Gasmate Odyssey 3T Searzone

Gasmate Rożen Odyssey 3T Searzone

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gasmate Odyssey 3T Searzone (20 stron) w kategorii Rożen. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
Powerful Ceramic Searzone 14MJ/h Burner and
2 x 11MJ/h stainless steel burners for true BBQ
performance
Rotary ignition for easy lighting
Removable grill circular section for wok cooking
Substantial cooking area of 2900cm
2, satin enamel
cast iron cooking surface – ½ grill and ½ hotplate
Durable die cast aluminium bowl and hood
Integrated temperature gauge - a must when roasting
Convenient side shelves for easier food preparation and
cooking – when not in use, they can be dropped down
High dome hood – 24cm – allows you to roast easily
Integrated trolley features wheels, BBQ tool hooks and
screen to discreetly hide gas cylinder and storage area
Supplied with hose and regulator so it’s ready to use
with a POL gas cylinder
Gas certified to Australian Standards
Model No. BQ10642, BQ10642R
3T
03397 08/17
Gasmate® is a registered trademark of:
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber, N.Z. www.gasmate.co.nz
2
It is important that you leak test the BBQ before first use and every time the gas cylinder is refilled and
reconnected to the BBQ.
Make sure all the control knobs are OFF.
In a small container, mix up a solution of water and detergent/soap.
Mix the solution well (about the same concentrate as washing up water).
Turn the cylinder ON by rotating the knob to open position.
Using a brush or spray bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
If bubbles appear, there is a gas leak.
If the leak is at the connection, re-tighten and re-seal.
If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
Replace gas hose and regulator.
Replacement hose and regulators can be purchased from your local BBQ retail specialist.
3
Barbecues must be used in accordance with the
installation requirements of your gas supply authority,
or the Australian Standard AS 5601.
Barbecues for use with bottled gas are labelled
‘propane gas’ or ‘Universal L.P.G’.
Barbecues for use with natural gas are labelled
‘natural gas’ and must be installed by an authorised
person. Check the gas type sticker attached to the
barbecue.
Minimum Clearances from combustible materials
must be:
Rear - 300mm Sides - 300mm Above - 1000mm
Barbecue specifications can be found on the data label
attached to the barbecue body.
Hose connection thread is 5/8”-18 UNF.
Read these instructions carefully prior to use.
Familiarise yourself with the appliance before
connecting it to it’s gas container. Keep these
instructions for future reference.
1. Shut off gas to the barbecue at its source,
if possible.
2. Extinguish any open flame.
3. Open hood.
4. If odour continues immediately call your gas
supplier or fire department.
The regulator and hose assembly supplied with the
barbecue are suitable for Propane Gas or Universal
L.P.G. only.
A gas regulator adjusted to have an outlet pressure of
2.75kPa is supplied for connection to the propane gas
cylinder. The pressure regulator and hose assembly
supplied with the barbecue must me used. Replacement
pressure regulators and hose assemblies must be those
specified by the barbecue manufacturer.
When connecting the hose and regulator assembly to the
gas cylinder, take care to avoid unnecessary twisting of
the flexible hose.
After the assembly has been secured, turn on the gas
and check for leaks by brushing a soap and water
solution over all connections.
If you are unable to correct the leak by tightening the
connections, turn off the gas and contact the supplier
immediately.
Always ensure the barbecue is kept away from flammable
materials and the gas cylinder clear of any heat source.
When changing over from an empty gas cylinder to a
full one make sure this procedure is carried out in a well
ventilated location, preferably outside, away from people
and away from any sources of ignition; such as naked
flames, pilot flames, electric heaters/equipment.
This is a low pressure barbecue and must only be used
with the regulator supplied. Your barbecue is designed
for use with 4.5Kg or 9Kg propane gas cylinders certified
to AS 2469.
The gas cylinder should be filled by a reputable gas
supplier and visually inspected and re-qualified at each
filling.
Always keep cylinder in an upright position. Always close
the cylinder valve when the barbecue is not in use.
Do not subject gas cylinder to excessive heat.
If you store your barbecue indoors, ALWAYS disconnect
the gas cylinder first and store the cylinder safely outside.
Cylinders must be stored outdoors in a well ventilated
area out of reach of children, and must not be stored in a
building, garage or any other enclosed area.


Specyfikacje produktu

Marka: Gasmate
Kategoria: Rożen
Model: Odyssey 3T Searzone

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gasmate Odyssey 3T Searzone, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Rożen Gasmate

Gasmate

Gasmate Lawson 470 Instrukcja

1 Października 2024
Gasmate

Gasmate CSB002 Instrukcja

1 Października 2024
Gasmate

Gasmate Lawson JNR Instrukcja

1 Października 2024
Gasmate

Gasmate Odyssey 1 Instrukcja

1 Października 2024
Gasmate

Gasmate Galaxy BQ1190 Instrukcja

1 Października 2024
Gasmate

Gasmate Odyssey 2T Instrukcja

1 Października 2024
Gasmate

Gasmate Rio G2006C Instrukcja

1 Października 2024

Instrukcje Rożen

Najnowsze instrukcje dla Rożen

Barbecook

Barbecook Siesta 210 Instrukcja

12 Października 2024
Roesle

Roesle MAGNUM PRO G3 Instrukcja

9 Października 2024
Roesle

Roesle No.1 F60 AIR Instrukcja

9 Października 2024
Roesle

Roesle Videro G4 Instrukcja

9 Października 2024
XO

XO GPOWER60K Instrukcja

8 Października 2024