Instrukcja obsługi Garmin Vector 2S

Garmin Różnorodny Vector 2S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Garmin Vector 2S (15 stron) w kategorii Różnorodny. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/15
Vector™ 2 and Vector 2S
Owner’s Manual
April 2015 Printed in Taiwan 190-01867-00_0A
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to for current updates and supplemental information concerning the use of this product.www.garmin.com
Garmin®, the Garmin logo, ANT+®, Edge®, and Forerunner® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT
Agent™
, fēnix®, Garmin Connect™, USB ANT Stick
™
, and Vector™
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without
the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Exustar ™
is a trademark of
Exustar Enterprise Co. Ltd. Mac®
is a registered trademark of Apple Computer, Inc. Shimano ® is a registered trademark of Shimano, Inc. Training Stress Score™
(TSS), Intensity Factor™
(IF), and Normalized Power™
(NP) are trademarks of Peaksware, LLC. Windows ® is a registered trademark of Microsoft Corporation in
the United States and other countries. Other trademarks and trade names are those of their respective owners.
This product is ANT+® certified. Visit for a list of compatible products and apps.www.thisisant.com/directory
The FCC ID is located in the battery compartment. FCC ID: IPH-02767
M/N: A02767
Table of Contents
Introduction.....................................................................1
Thank You .................................................................................. 1
Getting Started............................................................................1
Tools Included............................................................................ 1
Tools Needed............................................................................. 1
Installing the Vector Components ............................................... 1
Preparing for the Installation .................................................. 1
Determining the Bicycle Chain Clearance ............................. 1
Installing the Pedal and Pedal Pod ........................................ 1
Installing the Left Pedal and Pedal Pod................................. 2
Installing the Right Pedal....................................................... 2
Installing the Shoe Cleats........................................................... 2
Adjusting the Release Tension.............................................. 2
Paring Vector with Your Edge 1000........................................... 2
Pedal Pod Status LED ........................................................... 2
Your First Ride............................................................................ 2
Entering the Crank Length..................................................... 2
Setting the Installation Angle................................................. 3
Customizing the Data Fields.................................................. 3
Training........................................................................... 3
Pedal-Based Power.................................................................... 3
Cycling Dynamics....................................................................... 3
Using Cycling Dynamics........................................................ 3
Power Phase Data................................................................. 3
Platform Center Offset........................................................... 3
Maintenance Tips....................................................................... 3
Vector Data..................................................................... 3
Sending Your Ride to Garmin Connect...................................... 3
Garmin Connect ..................................................................... 4
Disconnecting the USB Cable................................................4
Device Information......................................................... 4
Vector Device Care..................................................................... 4
Removing the Pedal Pods and Pedals ....................................... 4
Replacing the Pedals and Cartridges ......................................... 4
Vector Storage............................................................................ 5
Vector Specifications .................................................................. 5
USB ANT Stick™ Specifications.................................................5
Battery Information..................................................................... 5
Replacing the Pedal Pod Battery........................................... 5
Other Compatible Devices............................................. 6
Edge 810 and 510 Device Instructions....................................... 6
Pairing Vector with Your Edge 810 or 510 Device................. 6
Entering the Crank Length..................................................... 6
Edge 800 Device Instructions..................................................... 6
Pairing Vector with the Edge 800 Device.............................. 6
Entering the Crank Length..................................................... 6
Edge 500 Device Instructions..................................................... 6
Pairing Vector with the Edge 500 Device.............................. 6
Entering the Crank Length..................................................... 6
Customizing the Data Fields.................................................. 6
fēnix® 3 Device Instructions....................................................... 6
Pairing Vector with the fēnix 3 Device................................... 6
Customizing the Data Fields.................................................. 6
Entering the Crank Length..................................................... 6
fēnix 2 Device Instructions.......................................................... 6
Pairing Vector with the fēnix 2 Device................................... 6
Customizing the Data Fields.................................................. 7
Entering the Crank Length..................................................... 7
Forerunner® 920XT Device Instructions.................................... 7
Pairing Vector with the Forerunner 920XT Device................ 7
Customizing the Data Fields.................................................. 7
Entering the Crank Length..................................................... 7
Forerunner 910XT Device Instructions....................................... 7
Pairing Vector with the Forerunner 910XT Device................ 7
Customizing the Data Fields.................................................. 7
Entering the Crank Length..................................................... 7
Appendix......................................................................... 7
Registering Vector...................................................................... 7
Power Data Fields...................................................................... 7
Troubleshooting.......................................................................... 8
Updating the Software Using Vector Updater........................ 8
Updating the Vector Software Using the Edge 1000 ............. 8
Understanding the Multiple Status LED Flashes ................... 8
Performing a Static Torque Test............................................ 9
Crank Compatibility................................................................ 9
Third-Party Devices............................................................... 9
Index.............................................................................. 10
Table of Contents i

Specyfikacje produktu

Marka: Garmin
Kategoria: Różnorodny
Model: Vector 2S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Garmin Vector 2S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Różnorodny Garmin

Garmin

Garmin XMap 7 Instrukcja

3 Lipca 2024
Garmin

Garmin Earthmate LT-40 Instrukcja

3 Lipca 2024
Garmin

Garmin Vector 2S Instrukcja

2 Lipca 2024
Garmin

Garmin Varia RTL516 Instrukcja

2 Lipca 2024
Garmin

Garmin Alpha100 TT 10 Instrukcja

2 Lipca 2024
Garmin

Garmin Vector Instrukcja

2 Lipca 2024
Garmin

Garmin Earthmate PN-60 Instrukcja

2 Lipca 2024
Garmin

Garmin VHF 100 Instrukcja

2 Lipca 2024
Garmin

Garmin TruSwing Instrukcja

2 Lipca 2024
Garmin

Garmin Varia RTL515 Instrukcja

1 Lipca 2024

Instrukcje Różnorodny

Najnowsze instrukcje dla Różnorodny

Walkera

Walkera Goggle 3 Instrukcja

15 Października 2024
Walkera

Walkera Goggle 4 Instrukcja

15 Października 2024
Somfy

Somfy Telis Lounge Instrukcja

5 Października 2024
Navman

Navman NavBus Instrukcja

5 Października 2024
Trelock

Trelock LS 320 Instrukcja

5 Października 2024
DJI

DJI Phantom 3 Standard Instrukcja

5 Października 2024
Bobike

Bobike Maxi City Instrukcja

5 Października 2024
Tanita

Tanita 1210N Instrukcja

5 Października 2024
Kerbl

Kerbl 81685 Cat flap Instrukcja

5 Października 2024
Tanita

Tanita HC-212F Breath Checker Instrukcja

5 Października 2024