Instrukcja obsługi Fuxtec FX-KSP351

Fuxtec Maszyna do piłowania FX-KSP351

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fuxtec FX-KSP351 (20 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS AIR
PURIFIER
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Read all instructions before operating the air
purifier.
2. Place air purifier where it is not easily knocked
over by persons in the household.
3. Always turn the air purifier controls to the OFF
position and unplug from the wall outlet when
not in use.
4. To disconnect the model HHT-080 series air
purifiers, first turn the control to the OFF
position, grip the plug and pull it from the wall
outlet. To disconnect the model HHT-100 series
air purifiers, press the Power button to turn the
unit off, grip the plug and pull it from the wall
outlet. Never pull by the cord.
5. Do not use any product with a damaged cord
or plug or if product malfunctions, is dropped
or damaged in any manner. Keep the cord
away from heated surfaces.
6. Do not use air purifier outdoors.
7. Never use air purifier unless it is fully
assembled.
8. Do not run power cord under carpets, and do
not cover with throw rugs. Arrange cord such
that it will not be tripped over.
9. Do not use air cleaner where combustible
gases or vapors are present.
10. Do not expose the air purifier to rain, or use
near water, in a bathroom, laundry area or
other damp location.
11. The air purifier must be used in its upright
position.
12. Do not allow foreign objects to enter ventilation
or exhaust opening as this may cause electric
shock or damage to the air purifier. Do not
block air outlets or intakes.
13. Locate air purifier near the outlet and avoid
using an extension cord.
14. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
15. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
16. Do not sit, stand or place heavy objects on the
air purifier.
17. Disconnect power supply before servicing.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Air Purifier
With Any Solid-State Speed Control Device.
PERMANENT
HEPA TOWER
AIR PURIFIERS
For Model Series
HHT-080 and HHT-100
YOUR AIR PURIFIER
HOW YOUR AIR PURIFIER WORKS
This model air purifier incorporates a 3-stage cleaning
system to help clean the air that passes through the filter
in the unit (Fig. 1).
Stage 1: Washable Particle Pre-Filter
Stage 2: 99% HEPA-Type Filter with antimicrobial treatment
Stage 3: Electronic Ionizer
Fig. 1
SET-UP
• Select a firm, level and flat location. For proper airflow, locate the unit at least 3 feet (1 M) from any
wall or furniture.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be
cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminates. This may also
help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug should
be used underneath to prevent permanent staining. This is especially important in homes with
contamination from smoking or fireplaces.
Control Panel
HEPA-
Type
Filters
(2)
Pre-filter (1)
Rear
Grille
OPERATION
Model HHT-080 Series Operation:
• Ensure the air purifier is plugged into a working
electrical outlet and the Power Knob is turned to the
OFF position.
• Start and run the air purifier on High for several minutes
and then rotate the Power Knob to the desired cleaning
level (Fig. 3a).
Model HHT-100 Series Operation:
• Ensure the air purifier is plugged into a working electrical
outlet.
• Press the power button ( ) once. The unit will automatically start at medium power (Fig. 3b).
• Press the power button again to select a different cleaning level.
It is recommended you run your air purifier 24 hours a day to ensure continuous cleaning.
Portable air purifiers are more effective in rooms where all doors and windows are closed.
Fig. 3a Fig. 3b
IONIZER FEATURE
The Ionizer helps boost the performance of the air purifier
and helps freshen the air.
• Press the Ionizer Control button ( ) (Fig. 4a & 4b). The
LED will illuminate. This will power the Ionizer on.
• To turn the Ionizer feature off, simply press the button
again. The LED light will no longer be illuminated.
Fig. 4a Fig. 4b
INSTALL HEPA-TYPE FILTERS
The HEPA-Type Filters are supplied within the air purifier. They are wrapped to ensure purity.
• Turn-off and unplug the air purifier. While pressing on
the notches along the rear grille, pull the grille towards
you and remove it (See Fig. 2a & 2b). Gently push along
the edge of the filter frame and pull forward. Repeat for
the second filter.
• Remove protective wrap from the filters.
• Place back into the air purifier housing and snap filter
grille into place.
Fig. 2a Fig. 2b
HHT-080 Series HHT-100 Series
HHT-080 Series HHT-100 Series

Specyfikacje produktu

Marka: Fuxtec
Kategoria: Maszyna do piłowania
Model: FX-KSP351

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fuxtec FX-KSP351, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Fuxtec

Fuxtec

Fuxtec FX-KSP351 Instrukcja

28 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024