Instrukcja obsługi Futaba 8UAPS
Futaba
Kontrolery RC
8UAPS
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Futaba 8UAPS (105 stron) w kategorii Kontrolery RC. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/105
8UAPS / 8UAFS
8UAPS / 8UAFS
8UAPS / 8UAFS
8UAPS / 8UAFS 8UAPS / 8UAFS
I
I
I
II M
M
M
M M
Thank you for purchasing a Futaba® 8Usuper series digital proportional R/C system. This
system is extremely versatile and may be used by beginners and pros alike. In order for you
to make the best use of your system and to fly safely, please read this manual carefully. If
you have any difficulties while using your system, please consult the manual, your hobby
dealer, or Futaba.
This manual is not just a translation and has been carefully written to be as helpful to you, the
new owner, as possible. There are many pages of setup procedures, examples, and trimming
instructions. If you feel that any corrections or clarifications should be made, please jot them
down on a piece of paper and send them to the factory. Due to unforeseen changes in
production procedures, the information contained in this manual is subject to change without
notice.
1. This product may be used for model airplane or surface use if on the correct
frequency.
The product described in this manual is subject to regulations of the Ministry of
Radio/Telecommunications and is restricted under Japanese law to such purposes.
2. Exportation precautions
(a) When this product is exported from Japan, its use is to be approved by the Radio Law of the
country of destination.
(b) Use of this product with other than models may be restricted by Export and Trade Control
Regulations. An application for export approval must be submitted.
3. Modification, adjustment, and replacement of parts
Futaba is not responsible for unauthorized modification, adjustment, and replacement
of parts of this product.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The RBRCTM SEAL on the (easily removable) nickel-cadmium battery contained in
Futaba products indicates that Futaba Corporation of America is voluntarily
participating in an industry program to collect and recycle these batteries at the end of
their useful lives, when taken out of service within the United States. The RBRCTM
program provides a convenient alternative to placing used nickel-cadmium batteries
into the trash or municipal waste which is illegal in some areas.
Futaba Corporation of America's payments to RBRCTM makes it easy for you to return
the spent battery to Futaba for recycling purposes. You may also contact your local
recycling center for information on where to return the spent battery. Please call 1-
800-8-BATTERY for information on Ni-Cd battery recycling in your area. Futaba
Corporation of America's involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
NOTE: Our instruction manuals need to encourage our customers to
return spent batteries to Futaba or a local recycling center in order to
keep a healthy environment.
Ni-Cd
RBRC
RBRC
RBRCTM is a trademark of the Rechargeable Battery Recycling
Corporation.
Pay special attention to the safety at the parts of this manual that are indicated by the
following marks.
Procedures which may lead to a dangerous condition and cause death
or serious injury to the user if not carried out properly.
Procedures which may lead to a dangerous condition or cause death or
serious injury to the user if not carried out properly, or procedures where the
probability of superficial injury or physical damage is high.
Procedures where the possibility of serious injury to the user is small,
but there is a danger of injury, or physical damage, if not carried out properly.
Symbol: ; Prohibited ; Mandatory
Specyfikacje produktu
| Marka: | Futaba |
| Kategoria: | Kontrolery RC |
| Model: | 8UAPS |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Futaba 8UAPS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kontrolery RC Futaba
5 Lipca 2024
3 Lipca 2024
Instrukcje Kontrolery RC
Najnowsze instrukcje dla Kontrolery RC
8 Października 2024