Instrukcja obsługi Fresh 'n Rebel Smart Finder Bicycle Bell

Fresh 'n Rebel Nie skategoryzowane Smart Finder Bicycle Bell

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fresh 'n Rebel Smart Finder Bicycle Bell (1 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
6ABTAG21 v1 001
SMART FINDER BIKE BELL
MANUAL
A. Overview
B. Bike Installation
1. Aluminum bell
2. Paddle
3. Turntable
4. Top cover
5. Bottom cover
6. Mounting bracket
7. Screws
8. Thin silicone pad
9. Thick silicone pad
1. Mount the bell on your
bicycle handlebar and
tighten the screw.
1. Use a screwdriver to
loosen the screws
2. Rotate the lower cover
counterclockwise to open it.
3. Replace the battery with
positive side (+ symbol)
facing towards you.
4. Put the lower cover
back in place.
2. If the handlebar is too thin, please use a silicone pad to
x it properly. Use the thicker silicone pad for Ø 22.2 mm
and 25.4 mm handlebars. Use the thinner silicone pad
for Ø 27.2 mm and 28.6 mm handlebars. For Ø 31.8 mm
handlebars a silicone pad is not required.
3. You can rotate the turntable (A3) 360 degrees
to adjust it in the desired position.
C - Battery Replacement
5. Rotate the lower cover
clockwise to lock it.
6. Tighten the screws
with a screwdriver.
EN - Speci cations
Fresh ‘n Rebel Smar t Finder Bike Bell 6ABTAG21 v 1 001
Specifi cat ions: bicycle bell with Find My-enabled Smart Finder,
suit able f or most handlebars (Ø 22.2 t o 31.8 mm), IPX5 splash water
resistant, accelerometer, speaker for beeping sounds, replaceable
battery, battery life up to 10 months, wo rking voltage 1.9 V ~ 3.6 V
System requirements and compatibility: Apple ID, iPhone models
with iOS 14.5 o r later, iPad mo dels with iPadOS 14.5 or later
Cont ents: Smart Finder Bike Bell, pre-inst alled CR-2032 bat ter y,
2 silico ne pads, Quick Start Guide
A- Overview
1. Aluminum bell / 2. Paddle / 3 . Turntable / 4. Top cover / 5. Bot tom
cover / 6. Mounting bracket / 7. Screws / 8. Thin silicone pad /
9. Thick silicone pad
B – Bike Installatio n
1. Mount t he bell on your bicycle handlebar and tighten the screw.
2. If the handlebar is too thin, please use a silic one pad to x it
properly. Use the thicker silicone pad for Ø 22.2 mm and 25.4 mm
handlebars. Use the t hinner silico ne pad f or Ø 27.2 mm and
28.6 mm handlebars. For Ø 31.8 mm handlebars a silicone pad
is not required.
3. You can rotate the turntable (A – 3) 360 degrees to adj ust it in
the desired position.
C - Bat t ery Replacement
1. Use a scr ewdriver to loosen the screws
2. Rot ate t he lower cover counterclockwise to open it.
3. Replace t he battery with positive side (+ symbol) f acing
towards you.
4. Put t he lower cover back in place.
5. Rot ate t he lower cover clockwis e to lock it.
6. Tighten the screws with a screwdriver.
Getting Started
IMPORTANT: Update to t he latest version of iO S or iPadOS and
turn Bluetooth on
1. Remove the Smart Finder’s batt ery fi lm by pulling it out to connect
the battery. You will hear a chime.
2. Open the Apple Find My app on your s upport ed iPhone
or iPad.
3. Tap +, then “Add Other lte m”.
4. Once your FnR 6ABTAG21 is located, t ap “Connect ”.
5. Enter a name, select an emoji for your Smart Finder and tap
“Continue’.
6. Tap “Agree” t o add the Smart Finder to your Apple ID.
7. Tap “Finish” and your Smart Finder will be set up and ready
to be used.
Locate your Sm ar t Finder when it is nearby
- Open the Apple Find My app and select t he “Items” tab.
- Tap on your Sm ar t Finder from the list.
- Tap “Play Sound” to make your Smart Finder beep.
- Tap “Stop Sound” to st op the beeps.
Locate your Sm ar t Finder on a map
- Open the Apple Find My app and select the “Items” t ab.
- Tap on your Sm ar t Finder from the list.
-
Your Smart Finder’s location will appear on t he map with a
time st amp.
- To navigate t o the lo cation, t ap “Directions” to open Apple Maps.
Not if y When Lef t Behind
- Open the Apple Find My app and select the “Items” t ab.
- Tap on your Sm ar t Finder from the list.
- Under “Not ifi cations” enable the “Not if y When Left
Behind” toggle.
- You will receive a notifi cation when you leave your Smart Finder behind
and it is no longer in range of your device.
Not ify When Found
- Under “Not ifi cations”, enable the “Notify When Found” t oggle.
- When your Smart Finder is seen by anot her Find My netwo rk device,
you will receive a not ifi catio n of it s location.


Specyfikacje produktu

Marka: Fresh 'n Rebel
Kategoria: Nie skategoryzowane
Model: Smart Finder Bicycle Bell

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fresh 'n Rebel Smart Finder Bicycle Bell, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Fresh 'n Rebel

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane