Instrukcja obsługi Fredenstein F605

Fredenstein odbiornik F605

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fredenstein F605 (5 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
F605
Headphone Amplifier
(Can Amp)
Operating Manual
Fredenstein F605 Headphone Amplifier
The F605 is a high performance professional headphone amplifier, offering an effective headphone
volume control for live or studio applications out of a Fredenstein Bento rack. The F605 features
balanced inputs, extended signal manipulation and a low output impedance to connect headphones
from 20 Ohms to 600 Ohms.
As all Fredenstein products, the F605 is designed by a German-American team and manufactured in
Taiwan.
Overview:
LED Indicators:
PWR : A green LED indicates presence of power
CLIP : A red CLIP indicator turns on at 2db below
clipping output level
Rotary Controls:
Volume : Volume control
Switches:
L<->R : flips the channels, left on right ear, right on left
ear
L CH : Both sides are reproducing the left channel only
R CH : Both sides are reproducing the right channel
only
if L CH and R CH are activated a mono signal is
reproduced on both sides
L POL : Selects the phase of the left channel
R POL : Selects the phase of the right channel
Connector:
Headphones : Unbalanced Stereo headphone output (TRS)
Fredenstein F605 Manual V1.1 July 18, 2014 Page 1
Fredenstein F605 Headphone Amplifier
Installation:
Please first power down your Fredenstein Bento rack before inserting the F605. The power
requirements are +/-16V, +/-100mA.
Please be aware, the F605 will not work in any third party enclosures.
The MAIN XLR balanced inputs are located on the rear panel of the Fredenstein Bento rack, the left
channels uses the XLR Main input, the right channel the XLR AUX input .
The balanced monitor outputs are located on the rear panel as well, the left channel is on the MAIN
output XLR, the right channel on the AUX output XLR.
The MAIN input is connected to the MAIN output and the AUX input to the AUX output to allow
the easy connection of other pieces of equipment like monitor controllers or AD converters, etc.
Volume:
Headphone volume control
L<->R:
Flips the channels of the headphones, important to insure well balanced mixes since most peoples
hearing is a little different between the left and right ear.
L CH:
Puts the left channel signal on both sides of the headphones to facilitate listening to single channel
signals.
R CH:
Puts the right channel signal on both sides of the headphones to facilitate listening to single channel
signals.
L CH and R CH:
Switches the amp in mono mode, signals on both sides of the headphones are identical.
L POL:
Flips the polarity of the left channel signal.
R POL:
Flips the polarity of the right channel signal.
By flipping the polarity of one channel and putting the unit in mono mode the so-called Side Signal
is fed to the headphones. The Side Signal is the difference between the two channels (A- B) while
the mono signal is the addition of the two channels (A + B). This is also useful when trying to have
identical levels on two channels. Adjust the level on one channel to the minimum volume since
they will cancel each other when they are exactly the same.
Fredenstein F605 Manual V1.1 July 18, 2014 Page 2

Specyfikacje produktu

Marka: Fredenstein
Kategoria: odbiornik
Model: F605

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fredenstein F605, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Fredenstein

Fredenstein

Fredenstein Artistic MIC-PRE Plus Instrukcja

10 Września 2024
Fredenstein

Fredenstein F605 Instrukcja

3 Września 2024
Fredenstein

Fredenstein F676 Instrukcja

2 Września 2024
Fredenstein

Fredenstein V.A.S. Mic-Pre Instrukcja

31 Sierpnia 2024
Fredenstein

Fredenstein HD Reference Instrukcja

14 Sierpnia 2024
Fredenstein

Fredenstein HD Mic Pre 500 Series Instrukcja

4 Lipca 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025