Instrukcja obsługi Fostex RM-3DT

Fostex głośnik RM-3DT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fostex RM-3DT (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
Stereo rack monitor
RM-3DT
Owner’s Manual
Thank you very much for purchasing a Fostex product.
This manual provides instructions for basic use of the unit.
Read this before using the unit for the rst time.
© FOSTEX COMPANY All Rights Reserved.
Table of contents
Introduction 2 ............................................................................
WARNINGS and PRECAUTIONS 2 ..........................
SAFETY INSTRUCTIONS 2 ...........................................
FCC (U.S.A.) & ICES-003 (Canada)
INFORMATION 2 ..............................................................
Features of the RM-3DT 2 ..........................................
Dante Network and System 3 .................................
Accessories 3 .....................................................................
Part names and functions 3 ..............................................
Front 3 ...................................................................................
Back 3 ....................................................................................
DIP switch settings 4 .............................................................
Meter 5 ...........................................................................................
Switches and buttons on the front of the unit
... 6
Dimensions 6 .............................................................................
Speci cations ......................................................................... 7
English
RM-3DT.indb 1
RM-3DT.indb 1
RM-3DT.indb 1
RM-3DT.indb 1RM-3DT.indb 1 2020/11/20 10:58
2020/11/20 10:58
2020/11/20 10:58
2020/11/20 10:582020/11/20 10:58
2
Introduction
The RM-3DT is a rack-mount type powered monitor equipped with a Dante function, and provides Dante network signals and analog audio
signals monitoring.
WARNINGS and PRECAUTIONS
• To prevent electric shock hazard, do not connect to mains CAUTION: The symbol
power supply while grille is removed.
• WARNING: An apparatus with CLASS I construction shall be connected to a MAINS
socket outlet with a protective earthing connection.
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE CAUTION:
SLOT, FULLY INSERT.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
• Use of any controls or adjustments or performance of procedures other CAUTION:
than those herein specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to
avoid damaging the surface. Use a protective barrier between the unit and surface to
protect the surface.
• WARNING: Use of this unit near fluorescent lighting may cause interference regarding
use of the remote. If the unit is displaying erratic behavior move away from any
fluorescent lighting, as it may be the cause.
• WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
• WARNING: Mains plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket outlet
completely.
CAUTION
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USERSERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before
the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for
future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Water and Moisture - The appliance should not be used near water - for example,
near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
6. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
The appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only
as recommended by the manufacturer.
8. Ventilation - The appliance should be situated so that its location or position does
not obstruct proper ventilation. For example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that may block the ventilation openings; or,
placed in a built-in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources such as radiators,
heat registers, stoves, or other appliances (including amplifiers) that produce heat.
10. Power Sources - The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance.
11. Grounding or Polarization - The precautions that should be taken so that the
grounding or polarization means of the appliance is not compromised.
12. Power Cord Protection - Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
13. Cleaning - The appliance should be cleaned only as recommended by the
manufacturer.
14. Nonuse Periods - The power cord of the appliance should be unplugged from the
outlet when left unused for a long period of time.
15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
16. Damage Requiring Service - The appliance should be serviced by qualified service
personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change
in performance; or
E. The appliance has been dropped, or the enclosure damaged.
17. Servicing - The user should not attempt to service the appliance beyond that
described in the operating instructions.
All other servicing should be referred to qualified service personnel.
18. The appliance should be situated away from drops of water or spraying water.
19. Objects containing liquid such as vases must not be put on the appliance.
20. The appliance is not completely isolated from the power supply even if the power
switch is in the off position.
21. Appliance shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the appliance.
22. Only use attachments/accessories specified by the manufacturer.
23. Appliances with a protective earth terminal should be connected to a mains outlet
with a protective earth connection.
24. The appliance should be placed in a position where an AC plug / inlet can be easily
pulled out by hand.
25. The main plug is used as the disconnection device. It shall remain readily operable
and should not be obstructed during intended use. To completely disconnect the
appliance from supply mains, the mains plug of the appliance shall be disconnected
from the mains socket outlet completely.
FCC (U.S.A.) & ICES-003 (Canada) INFORMATION
1. IMPORTANT NOTICE
This product, when installed as indicated in the instructions contained in this manual,
meets FCC and ICES-003 requirements. Changes or modifications not expressly
approved by Fostex Company for compliance could void the user’ s authority to
operate the equipment. DO NOT MODIFY THIS PRODUCT.
2. IMPORTANT
In order to comply with FCC and ICES-003 requirements, use high quality shielded
cables for connection to accessories and / or another products. If any cables are
supplied with this product, they MUST be used. Follow all installation instructions.
Failure to do so could void your FCC / ICES-003 authorization to use this product in
the USA / Canada.
3. NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4. Compliance with Part 15 of FCC Rules and Canadian ICES-003.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
Features of the RM-3DT
• The unit supports balanced analog input and Dante input.
• It has a power saving design with a digital amplier and switched-mode power supply.
• The 26 dot LED meter supports 4 dierent display modes: VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.
• The display has 4 brightness settings.
• The unit is designed to output either or both of any two-channel digital signals out of Dante network signals.
RM-3DT.indb 2
RM-3DT.indb 2
RM-3DT.indb 2
RM-3DT.indb 2RM-3DT.indb 2 2020/11/20 10:58
2020/11/20 10:58
2020/11/20 10:58
2020/11/20 10:582020/11/20 10:58
English
3
Part names and functions
Front
①
②
③ ④ ⑤ ⑦⑥ ⑧
① Speakers
The speakers do not emit any sound while headphones are
connected to the [PHONES] jack.
② Level meter
③ Status display
④ [PHONES] jack
⑤ Volume knob
⑥ Mute button
Press the button for approximately one second to mute
( page 6). Cancel mute by briey pressing the button again.
⑦ [OUTPUT] switch
page 6
⑧ [INPUT] switch
page 6
Back
ANALOG INPUT
L R L
ANALOG THRU OUT Dante IN 12345678
DIMMER
METER
PEAK/VU
SOUND
MUTE
REF LVL
1
2
3
4
5
6
7
8
ON
POWER
ON
OFF
AC IN
R
⑨ ⑩ ⑪ ⑫ ⑬ ⑭
⑨ [ANALOG INPUT] terminals (XLR)
⑩ [ANALOG THRU OUT] terminals (XLR)
Outputs the signal being input through the [ANALOG INPUT]
(XLR) terminal.
⑪ [Dante IN] terminal
Inputs Dante signals.
Connects a LAN cable (RJ45 type). Use an Ethernet cable with
CAT5e or higher.
⑫ DIP switches
Used to congure various settings ( page 4).
⑬ [POWER] switch
⑭ [AC IN] terminal
Used to connect to a power outlet using the supplied power
cord.
A grounding type plug has a third grounding prong. The third
prong are provided for your safety.
If the provided plug does not t into your AC outlet, consult an
electrician for replacement of the obsolete outlet.
Do not use any power cord other than the one supplied.
Dante Network and System
Dante® is a network-audio protocol developed by Audinate.
Dante network system transmits multiple uncompressed digital audio signals over IP networks compatible with Gigabit Ethernet.
For more information on Dante, visit the website below.
www.audinate.com
Accessories
• Power cable (USA: 1 pc, EUR/UK: 2 pcs)
• Rubber feet × 4
• Safety information sheet × 1
• Owner’s manual (this manual) × 1
RM-3DT.indb 3
RM-3DT.indb 3
RM-3DT.indb 3
RM-3DT.indb 3RM-3DT.indb 3 2020/11/20 10:58
2020/11/20 10:58
2020/11/20 10:58
2020/11/20 10:582020/11/20 10:58

Specyfikacje produktu

Marka: Fostex
Kategoria: głośnik
Model: RM-3DT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fostex RM-3DT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Fostex

Fostex

Fostex PM0.5d Instrukcja

2 Września 2024
Fostex

Fostex PM0.3dH Instrukcja

1 Września 2024
Fostex

Fostex PM0.4cB Instrukcja

23 Sierpnia 2024
Fostex

Fostex 6301N Instrukcja

21 Sierpnia 2024
Fostex

Fostex RM-3DT Instrukcja

13 Sierpnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Streetz

Streetz CM717 Instrukcja

20 Marca 2025
Streetz

Streetz CM715 Instrukcja

20 Marca 2025
Streetz

Streetz CM716 Instrukcja

20 Marca 2025
SOUNDBOKS

SOUNDBOKS The Battery Instrukcja

20 Marca 2025
ETON

ETON HEX 165 Instrukcja

19 Marca 2025
ETON

ETON PRW 50 Instrukcja

19 Marca 2025
ETON

ETON PFX 10 Instrukcja

19 Marca 2025
ETON

ETON PRA 80 Instrukcja

19 Marca 2025
ETON

ETON PFX 16 Instrukcja

19 Marca 2025
Manta

Manta SPK12GO Instrukcja

19 Marca 2025