Instrukcja obsługi Fostex 6301DT

Fostex monitor 6301DT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fostex 6301DT (11 stron) w kategorii monitor. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

Active Speaker

6301DT

Owner's Manual

Thank you for purchasing this Fostex product.

This manual provides instructions for basic use of the unit.

Read this before using the unit for the  rst time.

English



WARNINGS and PRECAUTIONS

• CAUTION: The symbol To prevent electric shock hazard, do not connect to

mains power supply while grille is removed.

• WARNING: An apparatus with CLASS I construction shall be connected to a

MAINS socket outlet with a protective earthing connection.

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

• WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

• CAUTION: Use of any controls or adjustments or performance of procedures

other than those herein specified may result in hazardous radiation exposure.

• WARNING: Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

• WARNING: Do not place the unit on top of any soft, porous, or sensitive

surfaces to avoid damaging the surface. Use a protective barrier between the

unit and surface to protect the surface.

• WARNING: Use of this unit near fluorescent lighting may cause interference

regarding use of the remote. If the unit is displaying erratic behavior move

away from any fluorescent lighting, as it may be the cause.

• WARNING: Do not install this equipment in a confined space such as a book

case or similar unit.

• WARNING: Mains plug is used as disconnect device and it should remain

readily operable during intended use. In order to disconnect the apparatus

from the mains completely, the mains plug should be disconnected from the

mains socket outlet completely.

CAUTION

WARNING: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK).

NO USERSERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

 SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions should be read

before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be

retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Water and Moisture - The appliance should not be used near water - for

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, and the like.

6. Carts and Stands - The appliance should be used

only with a cart or stand that is recommended by the

manufacturer.

The appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination

to overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or

ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location or

position does not obstruct proper ventilation. For example, the appliance

should not be situated on a bed, sofa, rug, or similar surface that may

block the ventilation openings; or, placed in a built-in installation, such as a

bookcase or cabinet that may impede the flow of air through the ventilation

openings.

9. Heat - The appliance should be situated away from heat sources such as

radiators, heat registers, stoves, or other appliances (including amplifiers)

that produce heat.

10. Power Sources - The appliance should be connected to a power supply only

of the type described in the operating instructions or as marked on the

appliance.

11. Grounding or Polarization - The precautions that should be taken so that

the grounding or polarization means of the appliance is not compromised.

12. Power Cord Protection - Power supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the appliance.

13. Cleaning - The appliance should be cleaned only as recommended by the

manufacturer.

14. Nonuse Periods - The power cord of the appliance should be unplugged

from the outlet when left unused for a long period of time.

15. Object and Liquid Entry - Care should be taken so that objects do not fall

and liquids are not spilled into the enclosure through openings.

16. Damage Requiring Service - The appliance should be serviced by qualified

service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a marked

change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Servicing - The user should not attempt to service the appliance beyond

that described in the operating instructions.

All other servicing should be referred to qualified service personnel.

18. The appliance should be situated away from drops of water or spraying

water.

19. Objects containing liquid such as vases must not be put on the appliance.

20. The appliance is not completely isolated from the power supply even if the

power switch is in the off position.

21. Appliance shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the appliance.

22. Only use attachments/accessories specified by the manufacturer.

23. Appliances with a protective earth terminal should be connected to a mains

outlet with a protective earth connection.

24. The appliance should be placed in a position where an AC plug / inlet can

be easily pulled out by hand.

25. The main plug is used as the disconnection device. It shall remain readily

operable and should not be obstructed during intended use. To completely

disconnect the appliance from supply mains, the mains plug of the

appliance shall be disconnected from the mains socket outlet completely.

 FCC (U.S.A.) & ICES-003 (Canada) INFORMATION

1. IMPORTANT NOTICE

This product, when installed as indicated in the instructions contained

in this manual, meets FCC and ICES-003 requirements. Changes or

modifications not expressly approved by Fostex Company for compliance

could void the user’ s authority to operate the equipment. DO NOT MODIFY

THIS PRODUCT.

2. IMPORTANT

In order to comply with FCC and ICES-003 requirements, use high quality

shielded cables for connection to accessories and / or another products. If

any cables are supplied with this product, they MUST be used. Follow all

installation instructions. Failure to do so could void your FCC / ICES-003

authorization to use this product in the USA / Canada.

3. NOTE

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

4. Compliance with Part 15 of FCC Rules and Canadian ICES-003.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

Introduction

6301DT is a compact monitor with built-in amplier equipped with Dante function and

performs various types of monitoring.

 Features

• The cone–shaped, full-range speaker produces stable sound.

• As the speaker is compact and consists of a single unit, it can be placed anywhere.

• The speaker uses a tough, aluminum die cast enclosure.

• Switches and knobs do not protrude from the panel to prevent damage caused if the speaker falls

over.

• Equipped with a switching power circuit compatible with 100 V to 240 V AC power supplies.

• 6301DT is designed to output either or both of any two-channel digital signals out of Dante network

signals.

Supported sampling frequencies: 44.1/48/88.2/96 kHz

• By attaching wall mounting bracket EB-6301 (sold separately) to the unit, you can both adjust the

angle of the unit and x it to walls.

 Dante Network and System

Dante® is a network-audio protocol developed by Audinate.

Dante network system transmits multiple uncompressed digital audio signals over IP networks

compatible with Gigabit Ethernet.

For more information on Dante, visit the website below.

www.audinate.com

 Accessories

• Power cord × 1

• Owner's Manual (this manual) × 1

• Safety Instruction × 1

English

Specyfikacje produktu

Marka:	Fostex
Kategoria:	monitor
Model:	6301DT
Kolor produktu:	Czarny
Rodzaj zasilania:	Prąd przemienny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 – 240 V
Wysokość produktu:	1890 mm
Szerokość produktu:	1200 mm
Głębokość produktu:	1200 mm
Waga produktu:	2300 g
Ilość na paczkę:	1 szt.
Rekomendowane użycie:	System konferencyjny
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Moc wyjściowa (RMS):	20 W
Pobór mocy w trybie czuwania:	0.5 W
Kanały wyjścia audio:	1.0 kan.
Pobór mocy:	10 W
Współczynnik zawartości harmonicznych:	0.05 %
Stosunek sygnału do szumu:	70 dB
Zasięg częstotliwości:	70 - 15000 Hz
Rozmieszczenie głośników:	Plansza/półka
Obudowa głośnika:	Zamknięty
Ilość przetworników:	1
Średnica sterownika:	100 mm
Wzmacniacz:	Wbudowany
Czułość:	85 dB
Typ głośnika:	1-drożny
Maksymalny poziom natężenia dźwięku:	98 dB