Instrukcja obsługi Fluval Plant Spectrum LED

Fluval nieskategoryzowany Plant Spectrum LED

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluval Plant Spectrum LED (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

INSTRUCTION MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

INSTRUCTIEHANDLEIDING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

INSTRUKCJA OBSŁUGI

PLANT SPECTRUM LED

DEL DE HAUTE LUMINOSITÉ POUR EAU DOUCE

LEISTUNGSSTARKES SÜSSWASSER-LED-BELEUCHTUNGSSYSTEMTEM

LED DE ALTO RENDIMIENTO PARA AGUA DULCE

ZOETWATER-LED

СВЕТОДИОДНЫЕ СВЕТИЛЬНИКИ MARINE SPECTRUM

PLANT SPECTRUM LED

IMPORTANT SAFETY INSTRUCTIONS

WARNING – To guard against injury, basic safety precautions should be observed, including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

and all the important notices on the appliance before using. Failure to do so may result in loss of ﬁsh life and/

or damage to this appliance.

2. DANGER – To avoid possible electric shock, special care should be taken since water is employed in the

use of aquarium equipment. For each of the following situations, do not attempt repairs yourself; return the

appliance to an authorized service facility for service or discard the appliance.

A. If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source.

B. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not

intended to be wet. If the appliance or any part of it falls into the water DO NOT reach for it. First unplug

the unit before retrieving.

C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is dropped or

damaged in any manner. The power cord of this appliance cannot be replaced; if the cord is damaged, the

appliance should be discarded. Never cut the cord.

D. To avoid the possibility of the appliance

plug or receptacle getting wet, position

the appliance to one side of a wall mounted

receptacle to prevent water from dripping

onto the receptacle or plug. A “drip loop”

(see illustration) should be arranged by the

user for the cord connecting appliance to

a receptacle. “The drip loop” is that part of

the cord below the level of the receptacle or

the connector if an extension cord is used,

to prevent water travelling along the cord

and coming in contact with the receptacle. If

the plug or receptacle does get wet, DO NOT

unplug the cord. Disconnect the fuse or circuit

breaker that supplies power to the appliance.

Then unplug and examine for presence of

water in receptacle.

3. This appliance is not intended for use by persons (including children) with signiﬁcantly impaired physical

or mental capabilities, unless they have been given supervision or instruction concerning the use of the

appliance by a person responsible for their safety. Children should always be supervised to ensure that they

do not play with the appliance.

4. To avoid injury, do not touch moving parts or hot parts.

5. CAUTION - Always unplug or disconnect all appliances in the aquarium from electricity supply before placing

hands in water, before putting on or taking off parts and while the equipment is being installed, maintained

or handled. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an

appliance from an outlet when not in use.

6. Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. FOR

INDOOR HOUSEHOLD USE ONLY. DO NOT IMMERSE.

7. Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating the

appliance.

8. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or

watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be

tripped over or pulled. The connection should be carried out by a qualiﬁed electrical installer.

9. Use only with AC adapter supplied with this product.

10. The socket-outlet shall be installed near the equipment and shall be easily accessible.

11. LED power supply shall not be positioned on or into the cover frame.

12. “Z” attachments: The external ﬂexible cable or cord of this luminaire cannot be replaced; if cord is damaged

the luminaire shall be destroyed.

13. This luminaire can be mounted on any aquarium with glass thickness of between 3 mm and 15 mm.

14. ATTENTION: The light source of this luminaire is not replaceable; when the light source reaches its end of life

the whole luminaire shall be replaced.

15. ATTENTION: Do not stare at the operating light source.

SAVE THESE INSTRUCTIONS

For the complete use and understanding of this product it is recommended that this manual is thoroughly

read and understood. Failure to do so may result in damage to this product.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure

condition without restriction.

For full instruction manual and video on set up of Bluetooth ® application, visit:

ﬂuvalaquatics.com/plantbluetooth

Download the Free SmartAPP now:

INSTALLATION:

Please verify that all components of the light ﬁxture are undamaged before putting it into operation.

Before any kind of maintenance, always disconnect electrical supply of the light ﬁxture.

• Make sure the light ﬁxture is mounted correctly and securely positioned on the aquarium before

operating the appliance.

• Always ensure that the brackets are on the outside of the aquarium frame. If needed, the

extendible mounting brackets can be adjusted accordingly to ensure proper ﬁt on aquarium.

• Connect transformer to electrical supply.

DIMMABLE LED WITH ILLUMINATED TOUCH SWITCH CONTROL:

Illuminated Touch Switch: Switch changes color to indicate the different settings:

off (red illumination), all lights on (white illumination), Blue lights only (blue illumination),

Bluetooth mode (green illumination).

Dimming Feature: Lighting intensity can be dimmed on both the white illumination setting (all lights

on)or the blue illumination setting (only blue lights on) by depressing the switch and keeping ﬁnger

on it until preferred lighting intensity is reached. Once dimming intensity level is chosen it will NOTE:

remain ﬁxed at that level, even if ﬁxture is turned off. To change the intensity level it is necessary to

manually depress and hold down the switch.

MAINTENANCE:

For maximum LED performance, it is recommended that the ﬁxture and the LED lens be cleaned on a

weekly basis. Unplug transformer prior to cleaning the light ﬁxture and remove from aquarium. Use

both hands when manipulating this appliance. Wipe exposed surfaces carefully with a damp cloth

to remove any dust or mineral deposits that may collect over time. Do not use detergents or harsh

cleaners as it can damage the light ﬁxture. Use Fluval LED Lens Cleaning Non-Aerosol Spray (A3969)

to clean the LED portion of the light ﬁxture. Make sure all surfaces are dry before re-connecting the

transformer to the power source.

BASIC TROUBLE-SHOOTING:

If the ﬁxture does not work, ensure that all plugs and wires are ﬁrmly connected, ie: connection from

ﬁxture to transformer, and connection from transformer to electrical outlet.

M :odel 14520 14521 14522 14523

Input Volts: 100-240 V 100-240 V 100-240 V 100-240 V

Operating Volts 24 V 24 V 24 V 24 V

Size

Adjustment :

15- 24"

(38 - 61 cm)

24- 34"

(61 - 85 cm)

36 - 48"

(91 - 122 cm)

48 - 60"

(122 - 153 cm)

No. of LEDs: 99 168 252 336

Wattage: 22 4632 59

Lumens: 1450 2350 3300 4250

Life in Hours 50 000 50 000 50 000 50 000

WARRANTY

3 YEAR LIMITED WARRANTY

Your Fluval Plant Spectrum LED is guaranteed for defective parts and workmanship for a period

of three years from the date of purchase. This guarantee is valid with proof of purchase only. The

guarantee is limited to repair or replacement only and does not cover consequential loss, loss or

damage to livestock and personal property or damage to animate or inanimate objects, irrespective

of the cause thereof. This guarantee is valid only under normal operating conditions for which

the unit is intended. It excludes any damage caused by unreasonable use, negligence, improper

installation, tampering, abuse or commercial use. The warranty does not cover wear and tear or

parts which have not been adequately or correctly maintained. Failure of less than 5% of the total

number of LEDs shall not be considered a defect under the terms of this warranty.

THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.

FOR AUTHORIZED WARRANTY REPAIR SERVICE:

For Authorized Warranty Service please return (well packaged and by registered post) to the

address below enclosing dated receipt and reason for return. If you have any queries or comments

about the operation of this product, please let us try to help you before you return the product to

your retailer. Most queries can be handled promptly with a phone call. When you call (or write),

please have all relevant information such as model number, age of product, details of aquarium

set-up, as well as the nature of the problem.

CANADA: Consumer Repair, Rolf C. Hagen Inc., 20500 Trans Canada Hwy,

Baie d’Urfé, QC H9X 0A2

U.S.A.: Rolf C. Hagen (U.S.A.) Corp., 305 Forbes Blvd, Mansﬁeld, MA. 02048

UK: Rolf C. Hagen (UK) Ltd, Customer Service Department California Drive, Whitwood Ind Est.,

Castleford West Yorkshire WF10 5QH http://faq.hagencrm.com/?uk

CALL US ON OUR TOLL-FREE NUMBER:

CANADA ONLY: 1-800-554-2436 between 9:00 a.m. and 4:30 p.m. Eastern Standard Time.

Ask for Customer Service.

U.S. ONLY: 1-800-724-2436 between 9:00 a.m. and 4:00 p.m. Eastern Standard Time.

Ask for Customer Service.

U.K. ONLY: Helpline Number 01977 521015. Between 9:00 AM and 5:00 PM, Monday to Thursday and

9:00 AM and 4:00 PM on Friday (excluding Bank Holidays).

RED= OFF

WHITE= ON

BLUE= BLUE ONLY

GREEN= BLUETOOTH MODE

Specyfikacje produktu

Marka:	Fluval
Kategoria:	nieskategoryzowany
Model:	Plant Spectrum LED

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fluval Plant Spectrum LED, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Fluval

Fluval Sea Instrukcja

19 Sierpnia 2024

Fluval Plant Spectrum LED Instrukcja

19 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024

Emko EZM-9920 Instrukcja

27 Października 2024

Emko ESM-3712-H Instrukcja

27 Października 2024

Emko ATS-10 Instrukcja

27 Października 2024

Emko EAOM-11.2 Instrukcja

27 Października 2024

Emko EPM-3790 Instrukcja

27 Października 2024

Emko EPM-7790 Instrukcja

27 Października 2024

Livarno Lux IAN 108340 Instrukcja

27 Października 2024

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024