Instrukcja obsługi Fluke FLK-IRR1-SOL
Fluke
światłomierz
FLK-IRR1-SOL
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke FLK-IRR1-SOL (9 stron) w kategorii światłomierz. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
Fluke IRR1-SOL
Irradiance Meter
Users Manual
5237649, September 2020
© 2020 Fluke Corporation. All rights reserved.
Specications are subject to change without notice.
All product names are trademarks of their respective companies.
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A. The Netherlands
Introduction
The Fluke IRR1-SOL Irradiance Meter (the Meter) provides digital read-outs
related to photovoltaic (PV) panels. Measures and reads:
• Solar irradiation (W/m2) on the surface of a photovoltaic (PV) panel
• Temperature (°F or °C) on the surface of a photovoltaic (PV) panel
• Inclination (degrees) of a photovoltaic (PV) panel
• Cardinal degrees with the compass function
The read-outs provided by the Meter help determine optimum positioning of the
photovoltaic (PV) panel for best performance.
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to
our website: www.uke.com
To register your product, view, print, or download the latest manual or manual
supplement, go to our website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
uke-info@uke.com
Kit Components
The product contains the following items:
1 FLK-IRR1-SOL/001 Solar Irradiance Meter
1 FLK-80PR-IRR External Temperature Probe with Suction Cup
1 C250 Carrying Case with Shoulder Strap
4 AA Alkaline Batteries
1 User Manual
English
1
Symbols
Symbol Description
WARNING. RISK OF DANGER.
Consult user documentation.
Battery or battery compartment.
Conforms to relevant South Korean EMC Standards.
Conforms to relevant Australian standards.
Conforms to European Union directives.
This product complies with the WEEE Directive marking
requirements. The axed label indicates that you must
not discard this electrical/electronic product in domestic
household waste. Product Category: With reference to
the equipment types in the WEEE Directive Annex I, this
product is classed as category 9 “Monitoring and Control
Instrumentation” product. Do not dispose of this product as
unsorted municipal waste.
Safety Information
A Warning identies hazardous conditions and procedures that are
dangerous to the user. A Caution identies conditions and procedures that
can cause damage to the Product or the equipment under test.
Warning
To prevent personal injury and damage to the Product:
• Read the entire users manual before using the Meter.
• Use the Meter only as described in the Users Manual otherwise
the protection provided by the equipment may be impaired.
• Inspect the Meter before use. Do not use it if it appears damaged.
• Do not use the Meter around explosive gas, vapor, and/or in damp
or wet environments that exceeds IP40.
• The Meter contains no user-serviceable parts. Do not open
the instrument.
• Use only AA batteries, properly installed in the Meter case, to
power the Meter (see Battery Replacement).
• To avoid false readings, replace the batteries as soon as the low
battery indicator appears.
• Remove the batteries if the Meter is not used for an extended
period of time, or if stored in temperatures above 140 °F (60 °C).
If the batteries are not removed, battery leakage can damage the
Meter.
• Have the Meter serviced only by qualied service personnel.
2
Product Overview
1
2
37
8
6
910
11
12
13
14
15
1617
5
4
1ON/OFF Button 10 Battery Level Indicator
2
Angle Reset Button
* Use function to measure
angle dierence between solar
panel and surface
11 Compass Function Indicator
3
Function key for Irradiance,
Temperature, Compass and
Angle measurements
12 Irradiance Units and
Function Indicator
4
Integrated Temperature
Sensor for panel's surface
measurement
13 Angle Function Indicator
5External Temperature
Probe Socket 14 Temperature Units Indicator
(Celsius / Fahrenheit)
6Photovoltaic Irradiance Sensor 15 Angle Reset Indicator
7
Hold Button to hold
measurement on the display
*Push button for 2 seconds
to enable Temperature Units
Change mode
16 External Temperature
Probe Indicator
8Temperature Units Switch
Button (Celsius / Fahrenheit) 17 Integrated Temperature
Sensor Indicator
9Hold Indicator
Specyfikacje produktu
| Marka: | Fluke |
| Kategoria: | światłomierz |
| Model: | FLK-IRR1-SOL |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Fluke FLK-IRR1-SOL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje światłomierz Fluke
28 Sierpnia 2024
Instrukcje światłomierz
- światłomierz Testo
- światłomierz Uni-T
- światłomierz Sekonic
- światłomierz Pyle
- światłomierz Extech
- światłomierz Kyoritsu
- światłomierz Klein Tools
- światłomierz Amprobe
- światłomierz Steren
- światłomierz Gossen
- światłomierz Delta Ohm
Najnowsze instrukcje dla światłomierz
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
30 Września 2024
29 Września 2024
28 Września 2024
27 Września 2024