Instrukcja obsługi Fluke BP290


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke BP290 (5 stron) w kategorii Akumulator. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
PN 4707531
July 2015
2015 Fluke Corporation. All rights reserved.
Specifications are subject to change without
notice. All product names are trademarks of
their respective companies.
BP290/BP291
Li- ion Battery Pack
Instruction Sheet
Introduction
BP290 and BP291 are Li-ion battery packs for use in the Fluke 190
Series II ScopeMeter Test Tools, the Fluke 430-II Power Quality Test
Tools, and other portable Fluke test tools. Check the users manual of
your test tool for compatibility. Within the battery pack, a microcontroller
keeps record of the charge condition of the battery and an LED indicator
is provided that informs you about the actual charge condition. The
indicator ha four LEDs and a test button. s
The battery charges when installed in the test tool or with the external
charger EBC290. To replace the battery in your test tool, see the users
manual for the test tool.
These battery packs have been tested in accordance with and comply to:
UN Manual of Tests and Criteria Part III Subsection 38.3
(ST/SG/AC.10/11/Rev.5) – also known as the UN T19.T8 tests
IEC62133
DOT/IATA
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
Technical Support USA: 1-800-44- -800-443-5853)FLUKE (1
Calibration/Repair USA: 1-888-99- -888-993-5853)FLUKE (1
Canada: 1-800- - -800-363-5853)36 FLUKE (1
Europe: +31 402-675-200
Japan: +81-3- -31146714
Singapore: +65-6799-5566
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at . www.uke.com
To register your product, visit . http://register.uke.com
To view, print, or download the latest manual supplement, visit
http://us.uke.com/usen/support/manuals.
Safety Information
A Warning identies conditions and procedures that are dangerous to the
user. A Caution identies conditions and procedures that can cause
damage to the Product or the equipment under test.
 Warning
To prevent possible electrical shock, fire, or personal injury:
Read all safety information before you use the battery.
Use the battery only as specified, or the protection
supplied by the battery can be compromised.
Remove the battery if not used for an extended period of
time, or if stored in temperatures >50 °
°
°
°°C. If the battery is
not removed, battery leakage can damage the test tool.
The battery door must be closed and locked before you
operate the test tool.
Carefully read all instructions . in this instruction sheet
Do not use the battery around explosive gas, vapor, or in
damp or wet environments.
Do not use the battery if it operates incorrectly.
Examine the case before you use the test tool. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
Do not use the battery if it is damaged.
Remove all probes, test leads, and accessories from the
test tool before the battery door is opened.
Batteries contain hazardous chemicals that can cause
burns or explode. If exposure to chemicals occurs, clean
with water and get medical aid.
Do not disassemble the battery.
Use only Fluke approved power adapters to charge the
battery.
Do not disassemble or crush battery cells and battery
packs.
Do not put battery cells and battery packs near heat or
fire. Do not put in sunlight.
Use only specified replacement parts.
Symbols
The table below lists the symbols used on the Product and in this
instruction sheet.
Symbol Description
Risk of Danger. Important information. See Instruction
Sheet.
WARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
Conforms to European Union directives.
Certied by CSA Group to North American safety
standards.
This product contains a Lithium-ion battery. Do not mix
with solid waste stream. Spent batteries should be
disposed of by a qualied recycler or hazardous
materials handler per local regulations. Contact your
authorized Fluke Service Center for recycling
information.
This product complies with the WEEE Directive
marking requirements. The axed label indicates that
you must not discard this electrical/electronic product
in domestic household waste. Product Category: With
reference to the equipment types in the WEEE
Directive Annex I, this product is classed as category 9
"Monitoring and Control Instrumentation" product. Do
not dispose of this product as unsorted municipal
waste.
Before You Start
Your shipment includes:
BP290 or BP291 Battery Pack
Support plate with self-adhesive tape (for BP290 only)
Instruction Sheet (this document)
Carefully check the contents of your shipment. If content is damaged or
missing, contact your distributor or the nearest F sales or service luke
oce.


Specyfikacje produktu

Marka: Fluke
Kategoria: Akumulator
Model: BP290

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fluke BP290, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Akumulator Fluke

Fluke

Fluke BC500 Instrukcja

7 Października 2024
Fluke

Fluke BP190 Instrukcja

28 Sierpnia 2024
Fluke

Fluke BP290 Instrukcja

24 Sierpnia 2024

Instrukcje Akumulator

Najnowsze instrukcje dla Akumulator