Instrukcja obsługi Fluke 5550A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke 5550A (26 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/26
5560A/5550A/5540A
Calibrator
Remote Programmers Manual
August 2022 Rev. 1, 9/23
© 2022-2023 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and
service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and services
are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke
authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion,
has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation
or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications
for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software
will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but
have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if
product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price.
Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased
in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or
replacement of a defective product which is returned to a Fluke authorized service center within the warranty
period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization
information, then send the product to that service center, with a description of the difficulty, postage and insurance
prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will
be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by
neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including
overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical
components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work.
Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the
repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF
DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation
of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every
buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of
competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
i
Introduction................................................................................................ 1
Contact Fluke Calibration .......................................................................... 1
Remote Operations ................................................................................... 2
Set up the IEEE-488 Port for Remote Control........................................... 3
IEEE-488 Interface Configuration ......................................................... 3
IEEE-488 Bus Communication Overview ............................................. 4
USBTMC Interface .................................................................................... 4
Set Up the USBTMC Port for Remote Control...................................... 4
USBTMC Communication Overview..................................................... 5
Use USBTMC to Communicate with the Product ................................. 5
RS-232 Serial Interface ............................................................................. 6
Use the RS-232 Port for Remote Control ............................................. 6
RS-232 Interface Specifications ........................................................... 6
Set up the RS-232 Port for Remote Control.............................................. 6
RS-232 Port Setup Procedure .............................................................. 6
Exceptions for Serial and Ethernet Remote Control ............................. 7
Ethernet Interface ...................................................................................... 7
Set up and Connect the Ethernet Interface .......................................... 7
Configure Network Security Allowed Host IP Addresses................... 7
Set the Starting IP Address.............................................................. 8
Set the Ending IP Address............................................................... 8
Set Range Enable / Disable ............................................................. 8
Set the IP Address................................................................................ 8
Select the Dynamic Host Configuration Protocol (DHCP) .................... 8
Set a Static Internet Address ................................................................ 8
Configure the General Network Socket Port......................................... 9
Configure the LAN Default Gateway..................................................... 9
Set the LAN Subnet Mask ......................................................................... 9
Read the MAC Address........................................................................ 10
Establish an Ethernet Connection ........................................................ 10
Terminate an Ethernet Connection....................................................... 10
Ethernet Remote Control ...................................................................... 10
Change Between Remote and Local Operation ................................... 10
Local State............................................................................................ 11
Local with Lockout State....................................................................... 11
Remote State........................................................................................ 11
Remote with Lockout State................................................................... 11
RS-232 Interface Overview ....................................................................... 13
RS-232/IEEE-488 Cables and Connectors ............................................... 14
IEEE-488 Connector............................................................................. 14
RS-232 Serial Connector...................................................................... 15


Specyfikacje produktu

Marka: Fluke
Kategoria: nieskategoryzowany
Model: 5550A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fluke 5550A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Fluke

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024