Instrukcja obsługi Fluke 54IIB

Fluke termometr 54IIB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fluke 54IIB (28 stron) w kategorii termometr. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
®
51, 52, 53, 54 Series II
Thermometer
Service Manual
PN 1276123
October 1999
© 1999 Fluke Corporation. All rights reserved. Printed in USA
All product names are trademarks of their respective companies.
LIMITED WARRANTY & LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and
service. The warranty period is three years and begins on the date of shipment. Parts, product repairs and
services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a
Fluke authorized reseller, and does not apply to fuses, disposable batteries or to any product which, in Fluke’s
opinion, has been misused, altered, neglected or damaged by accident or abnormal conditions of operation or
handling. Fluke warrants that software will operate substantially in accordance with its functional specifications
for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that
software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only
but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available
if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international
price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product
purchased in one country is submitted for repair in another country.
Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase price, free of charge repair, or
replacement of a defective product which is returned to a Fluke authorized service center within the warranty
period.
To obtain warranty service, contact your nearest Fluke authorized service center or send the product, with a
description of the difficulty, postage and insurance prepaid (FOB Destination), to the nearest Fluke authorized
service center. Fluke assumes no risk for damage in transit. Following warranty repair, the product will be
returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that the failure was caused by
misuse, alteration, accident or abnormal condition of operation or handling, Fluke will provide an estimate of
repair costs and obtain authorization before commencing the work. Following repair, the product will be
returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation
charges (FOB Shipping Point).
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS
OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT,
RELIANCE OR ANY OTHER THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or
limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply
to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court of competent
jurisdiction, such holding will not affect the validity or enforceability of any other provision.
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett WA 98206-9090 5602 B.D.
U.S.A Eindhoven, The Netherlands
i
Table of Contents
Title Page
Introduction ....................................................................................................... 1
Service Centers.................................................................................................. 2
International Symbols........................................................................................ 2
Precautions and Safety Information .................................................................. 2
General Specications .................................................................................. 4
Environmental ............................................................................................... 4
Electrical ....................................................................................................... 4
Performance Test and Calibration Required Test Equipment ........................... 5
Performance Tests ............................................................................................. 5
Display Test .................................................................................................. 5
Keypad Test .................................................................................................. 6
Wide Range Performance Test Procedure .................................................... 6
Ice Bath Construction ............................................................................... 6
Ice Bath Test............................................................................................. 7
Verification of IR Communications Port (Fluke 53 and 54)......................... 8
Calibration and Offset Adjustment.................................................................... 9
A/D Calibration............................................................................................. 9
Reference Junction Calibration..................................................................... 11
Using the Offset to Adjust for Variation Between Thermocouples .............. 11
Basic Maintenance............................................................................................. 12
Cleaning the Thermometer............................................................................ 12
Changing the Batteries .................................................................................. 12
Disassembly and Reassembly............................................................................ 13
Disassembly .................................................................................................. 13
Reassembly ................................................................................................... 14
Reinstalling the LCD Assembly ............................................................... 14
Rebuilding the Main PCA......................................................................... 14
Reinstalling the Main PCA ....................................................................... 15
Replaceable Parts............................................................................................... 15
Index

Specyfikacje produktu

Marka: Fluke
Kategoria: termometr
Model: 54IIB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fluke 54IIB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje termometr Fluke

Fluke

Fluke 59 MAX+ Instrukcja

22 Września 2024
Fluke

Fluke T5-600 Instrukcja

20 Września 2024
Fluke

Fluke 566 Instrukcja

29 Sierpnia 2024
Fluke

Fluke 572-2 Instrukcja

28 Sierpnia 2024
Fluke

Fluke 51 II Instrukcja

27 Sierpnia 2024
Fluke

Fluke 62 Max+ Instrukcja

26 Sierpnia 2024
Fluke

Fluke 54IIB Instrukcja

18 Sierpnia 2024
Fluke

Fluke 568 Instrukcja

14 Sierpnia 2024
Fluke

Fluke MT4 MAX Instrukcja

13 Sierpnia 2024
Fluke

Fluke t3000 FC Instrukcja

7 Sierpnia 2024

Instrukcje termometr

Najnowsze instrukcje dla termometr

Tefal

Tefal TD1400 Instrukcja

15 Stycznia 2025
AGM

AGM Taipan TM15-256 Instrukcja

15 Stycznia 2025
AGM

AGM Fuzion LRF TM35-384 Instrukcja

15 Stycznia 2025
AGM

AGM Taipan TM15-384 Instrukcja

15 Stycznia 2025
AGM

AGM Explorator FSB50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Fuzion LRF TM50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Fuzion LRF TM25-384 Instrukcja

15 Stycznia 2025
AGM

AGM F14 Instrukcja

15 Stycznia 2025
AGM

AGM ASP TM25-640 Instrukcja

14 Stycznia 2025
AGM

AGM ASP TM35-384 Instrukcja

14 Stycznia 2025