Instrukcja obsługi Flir MR40

Flir miary MR40

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Flir MR40 (6 stron) w kategorii miary. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

User Manual

Pen Moisture

Meter

MODEL MR40

Introduction

Thank you for choosing the FLIR MR40 Pen Moisture Meter with high power

flashlight. The MR40 measures moisture content (MC) in wood, brick, con-

crete and other building materials and traces leakage inside walls, ceilings,

and floors.

Description

1. Electrode pins protective cap

2. Power/Display Hold button

3. Display Hold icon

4. Moisture Reading

5. Battery status icon

6. Pocket clip

7. Flashlight ON/OFF button

8. Battery compartment cap

9. Flashlight

Operation

CAUTION

Electrode pins are extremely sharp. Use protective cap when instrument is not in use.

1. Long press the Power button to switch MR40 ON/OFF. The LCD displays

two blinking dashes, % symbol, and battery status icon. The MR40 auto-

matically switches OFF after 3 minutes.

2. Remove the protective cap to expose the electrode pins.

3. Carefully push pins into material under test. Insert pins perpendicular to

wood’s fiber structure.

4. Take several readings in various locations for the best representation of

the moisture present.

5. Read the LCD as follows:

• Low pitch single beep indicates moisture from 5 to 12%.

• High pitch single beep indicates moisture from 13 to 60%.

• High pitch rapid beeping indicates moisture > 60% ( displayed).OL

6. Short press the Power/Hold button to freeze a reading ( icon is dis-H

played). Press again to exit.

7. Long press the flashlight button to switch the light ON or OFF.

8. Replace the protective cap when finished.

#NAS100218; r. AD/97201/97216; en-US 1

Battery Check and Replacement

The displayed battery bar indicates battery status. When the battery indicator

has no bars and is flashing, replace the batteries. To replace batteries, twist

off the battery compartment end-cap and replace the two ‘AAA’ batteries, ob-

serving correct polarity. Secure the compartment before use.

Do not dispose of used batteries or rechargeable batteries in house-

hold waste.

Specifications

Display LCD

Measurement type Electrical resistance

Range 5 to 60% MC (moisture content)

Accuracy

5 to 30% MC: ±2% of reading

30 to 60% MC: Reference only

Note: Displayed reading is for Group 9/Building Materials, including plywood, drywall, and

oriented strand board (OSB). For other materials, download the MR40 Material Conver-

sion Chart (publication MR40-AN01): http://flir.custhelp.com/app/account/fl_downloads

Resolution 1%

Electrode pins Integrated, replaceable

Auto Power OFF (APO) After three (3) minutes

Power supply 2 x 1.5 V ‘AAA’ batteries

Battery status indicators Battery bar icon

Meter housing Impact-proof plastic

Dimensions 7.6 x 1.0 x 0.8 in. (192.8 x 26.1 x 31.2 mm)

Weight 2.8 oz. (80 g) with batteries

Limited 3–Year Warranty

This product is protected by FLIR’s Limited 3-Year Warranty. Visit

www.flir.com/testwarranty to read the warranty document.

Customer Support

Customer Support Telephone List https://support.flir.com/contact

Repair, Calibration, and Technical Support https://support.flir.com

#NAS100218; r. AD/97201/97216; en-US 2

Specyfikacje produktu

Marka:	Flir
Kategoria:	miary
Model:	MR40
Kolor produktu:	Czarny
Źródło zasilania:	Bateria
Wysokość produktu:	193 mm
Szerokość produktu:	26 mm
Głębokość produktu:	31 mm
Waga produktu:	80 g
Przeznaczenie:	Kieszeń
Zakres temperatur (eksploatacja):	-10 - 60 °C
Rodzaj baterii:	AAA
Model:	Higrometr elektroniczny
Liczba baterii:	2
Baterie w zestawie:	Tak
Termometr:	Nie
Zakres pomiaru wilgotności:	5 - 60 %