Instrukcja obsługi Finder 1C.61


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Finder 1C.61 (32 stron) w kategorii termostat. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/32
www.ndernet.com
1C.61
SLIDER CHRONOTHERMOSTAT
INDEX
TECHNICAL DATA
..................................................................................................
page 34
DIMENSIONS ...........................................................................................................page 34
INSTALLATION AND CONNECTIONS.............................................................page 36
BATTERY
.....................................................................................................................
page 38
START UP
....................................................................................................................
page 39
KEYS
.............................................................................................................................
page 40
SYMBOLS
...................................................................................................................
page 41
TIME / DATE SETTING
..........................................................................................
page 42
MANUAL MODE
......................................................................................................
page 44
DISPLAY LOCK
.........................................................................................................
page 44
FULL THERMOSTAT LOCK (with PIN)
............................................................
page 45
PROGRAMMING TEMPERATURE WITH SLIDERS
.....................................
page 47
DELAYED START TO TIME SEGMENTS
.........................................................
page 48
TIMED MANUAL (HOLIDAY FUNCTION) .....................................................page 50
ADVANCED SETTINGS ........................................................................................page 52
REMOTE CONTROL ..............................................................................................page 61
CALIBRATION .........................................................................................................page 62
EXTERNAL SENSOR................................................................................................page 62
1
TECHNICAL DATA
Power supply: 2 Alkaline batteries 1.5 V AAA
Winter temperature range: (+6…+24)°C
Summer temperature range: (+18…+30)°C
Manual temperature range: (+5…+37)°C
Frost protection temperature range: (+2…+8)°C
ON/OFF hysteresis: (0.1…0.9)°C
Internal sensor accuracy: +/– 0.5°C
Minimum programming interval: 1 hour (15 min with delayed startup
activated)
Degree protection: IP20
Output: relay 1 CO (volt free contact)
Contact rating: 5 A 250 V AC
Mounting: to the wall
ADDITIONAL NOTES
There are 3 audible alerts:
- : conrmation that key is pressedShort beep
- : conrmation that the information is saved3 long beeps
- : errorTrill
2
DIMENSIONS
3
4
INSTALLATION AND CONNECTIONS
SAFETY REQUIREMENTS
Before connecting to this programmable thermostat, make sure that the load
(heater, pump, etc.) is not connected to the supply and that the load is within
the ratings shown inside the thermostat.
POSITIONING
Install the programmable thermostat away from sources of heat (heaters, direct
sunlight, kitchens) and from doors/windows, and at a height of about 1.5 m
above the oor.
CLEANING
For cleaning - use only a damp cloth.
INSTALLATION
- Press to release the small catch with the aid of a screwdriver ( g.1)fi
- Fix the base to the wall
- Connect the load to the terminals following the wiring diagram ( g.2)fi
ELECTRICAL CONNECTIONS ( g.2)fi
U = equipment load
C = common terminal
NO
=
normally open terminal
NC = normally closed terminal
ATTENTION
- Fix the base on a at surface
- Use only the screws provided
- When installing do not twist the base of the thermostat
- Do not poke the base, or insert the screws in areas not intended
- Once mounted, to extract the thermostat, pull from the wall, using
the two the side aps (do not twist or rotate the structure)
5
1
2
g 1.
g 2.
6
To insert or change the batteries, see the picture below.
ATTENTION
- Incorrect placement of the batteries (reverse polarity) may damage the
thermostat.
- To increase battery life, always keep the slider cover of the thermostat
closed.
- If the battery charge falls below the minimum level, the thermostat is
placed in the OFF state and the output relay releases.
- If the thermostat remains unused for long periods it is advisable to remove
the batteries.
The thermostat provides 3 dierent reports of battery condition:
With the battery icon (STEADY), operation of the thermostat will soon ON
be compromised.
With the battery icon imminent replacement of batteries is FLASHING
necessary.
With the the thermostat is in the OFF state and the output relay FLASHING
releases.
NOTE
Replacing the batteries at the initial warning ON (STEADY) and taking
no more than 40 seconds, the date and time will not be erased.
BATTERY
7
START UP
Insert the batteries, the display will show the software version.
And, after a few seconds, the thermostat will automatically turn on, showing
the main screen:
SWITCH O OFFN /
TIME TIM DATE SETTINGE /
MANUAL
WINTER MODE
TEMPERATURE LOCK
8
KEYS
WITH THERMOSTAT OFF
Switch on the thermostat
Pressed for 3 seconds, it is possible to access at the advanced menu
WITH THERMOSTAT ON
Switch o the thermostat
Activates the MANUAL mode. Pressed for 3 seconds it is possible to
program the TIMED MANUAL mode (HOLIDAY function)
Allows the time and date to be set
Activates or de-activates the LOCK mode
(Visible only if activated in the advanced menu).
Allows the DAY mode to be enabled or disabled
ADVANCED SETTINGS
Conrms the information displayed on the display and advances
to the next screen
Changes the data displayed (increase)
Changes the data displayed (decrease)
Press once to return to the previous data.
Press for 3 seconds to exit the menu displayed
day
OK
S
E
T
S
E
T
9
SYMBOLS
The display is back-lit. Each time that the display is touched, a key pressed,
the protective door opened or the sliders moved, the display will activate
the backlight for about 5 seconds.
The symbols showed on the display are:
Summer setting (cooling)
Winter setting (heating)
Heating ON
Cooling ON
Frost protection ON
Shows time segment is delayed by 15, 30 or 45 minutes, compared
with the time indicated by the slider
Low battery
Unit of measurement
ON/OFF hysteresis
Indicates that the LOCK mode is active
In the DAY mode - indicates
Thermostat OFF
In the DAY mode - indicates
Programming by sliders
In the DAY mode - indicates
Manual setting
Indicates days of the week
T
°C
+15
+30
+45
1
2
3
4
5
6
7
TIM DATE SETTINGE /
To set time and date press the button .
Data to be set appears in the following order:
HOURS/MINUTES/DAY/MONTH/YEAR
Figures that are ashing, can be changed using the keys .
Conrm with OK and advance to the next parameter.
To go back or exit from the menu, press .
EXAMPLE
Press .
The hourashes. Enter the correct time through keys .
Pressing OK conrms the hour setting and it is then possible to set the
MINUTES, using the same method.
Press OK to conrm the minutes setting. Then proceed to set the .DAY
10
Press OK conrm the day and proceed to set the MONTH
Press OK to conrm the month and proceed to set the YEAR
Press OK to conrm and exit the Time/Date setting menu.
The display will then show the main screen.
11
From the main screen press
the manual temperature previously set will ash.
To change it, use to increase or to decrease the value.
To conrm and exit, press
NOTE
If you do not touch the display for 3 seconds, the screen will revert to the
measured (current) temperature.
12
MANUAL MODE
DISPLAY LOCK
This function protects the thermostat from accidental touch, blocking ONLY
the display keys.
To activate, it is necessary to press for 2 seconds.
The symbol appears adjacent to the displayed temperature indicating that
the lock is activated. To deactivate, press for 2 seconds.
Note: it is still possible to vary the set temperature, using the sliders.
( )display locked
13
This advanced feature, serves to completely block the thermostat (both the
display and sliders).
To enable it, you must set a 3-digit PIN that will be required every time you
want to lock or unlock the thermostat.
To set and register the PIN:
- Turn o the thermostat with the key
- Press S
E
T for 3 seconds to enter into the ADVANCED SETTINGS
- Press OK until the screen shows which then allows the personalCODE
PIN code to be entered
Press the keys to attain the PIN number and conrm with OK .
It is now possible to exit from the Advanced settings, pressing key OK several
times or key S
E
T until three beeps conrm that the PIN is successfully registered.
The thermostat remains turned o.
To activate the thermostat lock function with the PIN, press to turn on
the device and then press for 3 seconds.
The following screen appears
FULL THERMOSTAT LOCK (with PIN)


Specyfikacje produktu

Marka: Finder
Kategoria: termostat
Model: 1C.61

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Finder 1C.61, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Finder

Finder

Finder Bliss T 1T.9 Instrukcja

29 Września 2024
Finder

Finder 1C.81 Instrukcja

19 Września 2024
Finder

Finder 1C.51 Instrukcja

1 Września 2024
Finder

Finder 1C.71-7 Instrukcja

22 Sierpnia 2024
Finder

Finder 1T.31 Instrukcja

22 Sierpnia 2024
Finder

Finder 1T.41 Instrukcja

6 Sierpnia 2024

Instrukcje termostat

Najnowsze instrukcje dla termostat