Instrukcja obsługi Fimer PVS-10-TL-SX

Fimer Niesklasyfikowane PVS-10-TL-SX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fimer PVS-10-TL-SX (92 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/92

Solar Inverter

PVS-10/12.5/15-TL

Product Manual

ATTENTION – AIMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety instructions that must be followed during the installation and maintenance of the equipment.

ATTENTION – ASAVE THESE INSTRUCTIONS

Keep this document in a safe place near the inverter for easy access during installation, operation and maintenance.

The installer must read this document in its entirety and scrupulously follow the instructions given in it before installing this equipment,

since Fimer cannot be held responsible for damage caused to people and/or things, or the equipment, if the conditions described below

are not observed.

The purpose of this document is to support the qualified technician, who has received training and/or has demonstrated skills and

knowledge in construction, to install, operate and maintain the inverter. This manual covers the inverter only, and NO other equipment

(photovoltaic modules, external disconnects, etc) to which it is connected.

Warranty requirements are included in the Terms and Conditions of sale included with the inverter order.

NOTE – DAny changes made to the product or to the installation conditions that hasn’t been approved by Fimer will void the warranty.

NOTE – DAll pictures and illustrations shown in this user manual are indicatives and must be intended as support for installation

instruction only. Actual product may vary due to product enhancement. Specifications subject to change without notice. The latest

version of this document is available on the Fimer website.

The products are designed to be connected and communicate information and data via a network interface. It is the user’s sole

responsibility to provide and continuously ensure a secure connection between the product and the user’s network or any other network

(as the case may be). The user shall establish and maintain any appropriate measures (such as but not limited to the installation of

firewalls, application of authentication measures, encryption of data, installation of anti-virus programs, etc) to protect the product, the

network, its system and the interface against any kind of security breaches, unauthorized access, interference, intrusion, leakage and/

or theft of data or information. Fimer and its affiliates are not liable for damages and/or losses related to such security breaches, any

unauthorized access, interference, intrusion, leakage and/or theft of data or information. The data, examples and diagrams in this manual

are included solely for the concept or product description and are not to be deemed as a statement of guaranteed properties.

All persons responsible for applying the equipment addressed in this manual must satisfy themselves that each intended application is

suitable and acceptable, including that any applicable safety or other operational requirements are complied with. In particular, any risks

in applications where a system failure and/or product failure would create a risk for harm to property or persons (including but not limited

to personal injuries or death) shall be the sole responsibility of the person or entity applying the equipment, and those so responsible are

hereby requested to ensure that all measures are taken to exclude or mitigate such risks. This document has been carefully checked

by Fimer but deviations cannot be completely ruled out. In case any errors are detected, the reader is kindly requested to notify the

manufacturer. Other than under explicit contractual commitments, in no event shall Fimer be responsible or liable for any loss or damage

resulting from the use of this manual or the application of the equipment.

Table of Content

1. Safety and accident prevention 7

1.1 Safety information and instructions 7

1.2 Symbols and signs 7

1.3 Installation and maintenance safety 8

1.3.1 General safety information 8

1.3.2 Environmental conditions and risks 8

1.3.3 Electrical and thermal safety 8

1.4 Residual risks 9

2. Introduction and general information 10

2.1 Warranty and supply conditions 10

2.1.1 Not incl uded in the supply c onditions 10

2.2 Scope and target audience 10

2.2.1 Purpose and document structure 10

2.2.2 List of appendix documents 10

2.2.3 Operator and maintenance personnel skills/prerequisites 10

2.3 Application area, general conditions 11

2.3.1 Intended or allowed use 11

2.3.2 Limits in field of use 11

2.3.3 Improper or prohibited use 11

3. Characteristics 12

3.1 General conditions 12

3.2 Identification of equipment and manufacturer 12

3.2.1 Regulatory and identification Label 12

3.2.2 Communication Identification label 13

3.3 Models and range of equipment 13

3.4 Component reference numbers 14

3.4.1 Inverter ex ternal view 15

3.5 Technical data 17

3.5.1 Technical data table 17

3.5.2 Tightening torques 19

3.5.3 Cable gland clamping range 19

3.5.4 Connectors cross section range 19

3.5.5 Overall dimensions of the inverter 20

3.5.6 Overall dimensions of the mounting bracket 20

Specyfikacje produktu

Marka:	Fimer
Kategoria:	Niesklasyfikowane
Model:	PVS-10-TL-SX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fimer PVS-10-TL-SX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Fimer

Fimer PVS-10-TL-SX Instrukcja

26 Września 2024

Fimer PVS-60-TL Instrukcja

26 Września 2024

Fimer PVS-10-TL Instrukcja

26 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024