Instrukcja obsługi Fibaro FIBEFGDW-002-1
Fibaro
Czujnik Deur/ramki
FIBEFGDW-002-1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fibaro FIBEFGDW-002-1 (16 stron) w kategorii Czujnik Deur/ramki. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
FIBARO DOOR/WINDOW SENSOR 2
FGDW-002
CONTENTS
#1: Description and features 3
#2: Basic activation 4
#3: Adding/removing the device 5
#4: Physical installation 6
#5: Operating the device 7
#6: Association 9
#7: Advanced parameters 10
#8: Specications 14
#9: Regulations 15
O P E R A T I N G
M A N U A L
EN
v1.1
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing
the comfort level of your home automation system. If you want to
use professional security service, please contact them to determine
what systems can provide a protection of your estate.
Compliance with safety standards:
The device is designed to be used in Z-wave home automation sys-
tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case
of the integration with another system, e.g. alarm system, it is re-
quired to verify the compliance with additional standards.
!
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-Wave protocol. All of available devices can be controlled through
a computer (PC or Mac), smartphone or tablet. Z-Wave devices are
not only receivers, but can also repeat the signal, increasing the
Z-Wave network’s range. It gives advantage over traditional wireless
systems that require direct link between transmitter and receiver, as
a result the construction of the building could aect network’s range
negatively.
Every Z-Wave network has its unique identication number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit
www.baro.com.
3
DESCRIPTION AND FEATURES
Main features of FIBARO Door/Window Sensor 2:
• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network Security Mode) with
AES-128 encryption,
• Door/window opening detected through separation of Sensor’s
body and a magnet,
• Built-in temperature sensor,
• Detects tampering, when detached or opened,
• Easily mounted on doors, windows, garage gates and roller blinds,
• Battery powered,
• Visual LED indicator signalling status of the device,
• 7 color variations.
FIBARO Door/Window Sensor 2 is a wireless, battery powered Hall
eect contact sensor, compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the
Z-Wave controller and associated devices.
Sensor can be used to trigger scenes and wherever there is a need
for information about opening or closing of doors, windows, garage
doors, etc. Opening is detected by separating the sensor’s body and
the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with
a built-in temperature sensor.
#1: Description and features
FIBARO Door/Window Sensor 2
is a fully compatible Z-Wave
PLUS device.
NOTE
This device may be
used with all devices
certied with Z-Wave
Plus certicate and
should be compatible
with such devices pro-
duced by other manu-
facturers.
i
NOTE
Z-Wave Controller
must support Z-Wave
Security Mode in
order to fully utilize the
product.
i
Specyfikacje produktu
| Marka: | Fibaro |
| Kategoria: | Czujnik Deur/ramki |
| Model: | FIBEFGDW-002-1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Fibaro FIBEFGDW-002-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Czujnik Deur/ramki Fibaro
22 Września 2024
13 Września 2024
13 Września 2024
11 Września 2024
11 Września 2024
11 Września 2024
11 Września 2024
9 Września 2024
Instrukcje Czujnik Deur/ramki
- Czujnik Deur/ramki Bosch
- Czujnik Deur/ramki Hikvision
- Czujnik Deur/ramki EZVIZ
- Czujnik Deur/ramki Nedis
- Czujnik Deur/ramki Nexa
- Czujnik Deur/ramki ORNO
- Czujnik Deur/ramki Chamberlain
- Czujnik Deur/ramki Emos
- Czujnik Deur/ramki Somfy
- Czujnik Deur/ramki Homematic IP
- Czujnik Deur/ramki Kidde
- Czujnik Deur/ramki Kanlux
- Czujnik Deur/ramki Axis
- Czujnik Deur/ramki Abus
- Czujnik Deur/ramki Olympia
- Czujnik Deur/ramki Marmitek
- Czujnik Deur/ramki Optex
- Czujnik Deur/ramki Schwaiger
- Czujnik Deur/ramki Vivanco
- Czujnik Deur/ramki Smartwares
- Czujnik Deur/ramki Caliber
- Czujnik Deur/ramki KlikaanKlikuit
- Czujnik Deur/ramki Energenie
- Czujnik Deur/ramki Techly
- Czujnik Deur/ramki Steren
- Czujnik Deur/ramki Konig
- Czujnik Deur/ramki Xavax
- Czujnik Deur/ramki X4-Tech
- Czujnik Deur/ramki Interlogix
- Czujnik Deur/ramki Satel
- Czujnik Deur/ramki Pentatech
- Czujnik Deur/ramki Tellur
- Czujnik Deur/ramki Gewiss
Najnowsze instrukcje dla Czujnik Deur/ramki
30 Grudnia 2025
20 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
6 Grudnia 2024
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024