Instrukcja obsługi Ferm fbf 6 e Frezen
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ferm fbf 6 e Frezen (20 stron) w kategorii Przemiał. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/20
Ferm b.v. • P.O. Box 134 • 8280 AC Genemuiden NL • Web: www.ferm.com 0107/13-1
Art.nr. 326110
FBF-6E
USERS MANUAL
Router 02
GEBRAUCHSANWEISUNG
Oberfräse 07
GEBRUIKSAANWIJZING
Bovenfrees 13
MODE D’EMPLOI
Défonceuse 18
BRUKSANVISNING
Överfräs 24
KÄYTTÖOHJE
Yläjyrsin 29
BRUKSANVISNING
Overfres 34
BRUGER VEJLEDNING
Overfladefræser 40
GB
D
NL
F
SV
SU
N
DK
UK Subject to change
D Änderungen vorbehalten
NL Wijzigingen voorbehouden
F Sous réserve de modifications
SV Ändringar förbehålles
SU Pidätämme oikeuden muutoksiin
NO Rett till endringer forbeholdes
DK Ret til ændringer forbeholdes
Ferm 39
EEXXPPLLOODDEEDD VVIIEEWW
ROUTER
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
SAFETY INSTRUCTIONS
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and also
the enclosed safety instructions.
Keep these instructions in a safe place!
• Check workpieces for any protruding nails etc. and
remove these.
• Keep your hands away from the surface to be cut.
TECHNICAL SPECIFICATIONS
Voltage 230 V~
Frequency 50 Hz
Power input 550 W
No load speed 8000–32000/min
Max. cutter diameter 30 mm
Cutting depth 35 mm
Collet 6 mm
Weight 3.25 kg
Lpa(sound pressure) 81.3 dB(A)
Lwa(sound power) 94.3 dB(A)
Vibration value < 4.0 m/s2
Fuses 230 V machines 10 A
Electrical safety
Always check that the power supply corre-
sponds to the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is requi-
red.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor size
is 1.5 mm
2
. When using a cable reel always unwind the
reel completely.
PACKAGE CONTENTS
1 router
1 cutter
1 parallel guide
2 screws
1 6 mm collet (1/4”)
1 8 mm collet
2 open-ended spanners
1 hexagonal key
1 instruction manual
1 safety instructions
1 guarantee card
Check the machine, loose parts and accessories for trans-
port damage.
2Ferm
38 Ferm
SPARE PARTS LIST FBE-6E
REF.NR. DESCRIPTION FERM NR.
001 SWITCH 302008
002 HANDLE 302003
003 LOCKING BOLT 302002
004 COLLET NUT 312009
005 CUTTING DEPTH STOP 302009
006 CLAMPING LEVER 302010
007 ELECTRONIC SPEED CONTROL 302011
008 ROTOR 302012
009 STATOR 302013
010 CARBON BRUSH (SET) 302014
011 DUSTEXTRACTING ADAPTOR 302015
015 GUIDE ROD 302005
016 GUIDE FRAME 302006
- OPEN ENDED SPANNER 302016
- OPEN ENDED SPANNER (COLLET NUT) 312011
- SPRING COLLET 6 MM 312012
PRODUCT INFORMATION
Fig. A.
This machine has been designed for professional routing
of wood, wood products and plastics.
1 on/off switch
2 machine clamp screw
3 clamping lever for depth adjustment
4 handle
5. collet bracket
6 collet nut
7 router base
8 opening for parallel guide
9 locking bolt for parallel guide
10 revolver-depth stop
11 scale cutting depth
12 locking bolt depth stop
13 adjusting wheel electronic speed control
MOUNTING ACCESSORIES
Fig. B.
Prior to mounting an accessory always unplug
the tool.
Mounting and removing cutters.
Only use cutters with a shaft diameter which corresponds
with the size of the collet. Only use cutters which are suited
for the maximum speed of the machine. The cutter diame-
ter should not exceed the maximum diameter (see ‘Tech-
nical specifications’).
• Place an open-ended spanner on the collet bracket
and use the second spanner to loosen the collet nut.
• Place the cutter shaft in the collet.
• Tighten the collet nut so that the cutter is locked pro-
perly.
• Open the collet nut when you want to replace a cutter.
Wait until the machine has come to a complete
standstill and the cutter has cooled down before
replacing a cutter.
1
4
5
6
7
8
9
10
11
12
13
3
2
Ferm 3
Specyfikacje produktu
| Marka: | Ferm |
| Kategoria: | Przemiał |
| Model: | fbf 6 e Frezen |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ferm fbf 6 e Frezen, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Przemiał Ferm
18 Września 2024
18 Września 2024
Instrukcje Przemiał
Najnowsze instrukcje dla Przemiał
28 Września 2024
24 Września 2024
2 Września 2024
6 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
5 Lipca 2024
4 Lipca 2024
1 Lipca 2024