Instrukcja obsługi Fenton MOVE80

Fenton system hi-fi MOVE80

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fenton MOVE80 (17 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/17

MOVE80 Portable Sound System

Ref. nr.: 170.042

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to

benet fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thun storm or if the unit will not be used for a der

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the xture on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic eld. Keep this unit at least 60cm away from

computer or TV.

- If this product have a built-in lead-acid rechargeable

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- the unit has fallen, always have it checked by a If

qualied technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

his mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certied CE. It is prohibited to make any changes to the uni They would invalidate the CE certicate and t.

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by in nin appropriate use or disrespect of the war gs

contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations

and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCT ION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing. If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the device switched o until it has

reached room temperature.

OVERVIEW

1. LE DISPLAY D

2. BUTTON CLUSTER

Press change modes Mode –to

Previous track Play the previous track –

Start/resume or pause play by p ssing this button Play/P zeau –re

Skip to next track Next Track –

Press for record function. Hold to give microphone signal priority. When speaking through the microphone, t R /Prioec –he

music volume will be muted

LED - Turn the LED light show on/o ff

3. MICROSD PORT

Insert a MicroS card in this slot. D

4. USB PORT

U entry port. SB

5. INPUTAUX

3.5mm auxiliary l input jack. ine

6. MICROPHONE INPUT JACK 6.3MM

7. MICROPHONE INPUT JACK 6.3MM

8. MIC PHONE VOLUME CONTROLRO

Turn to adjust the microphone lume. vo

9. CONTROLECHO

Turn to change the echo eect.

10. TREBLE CONTROL

Turn to change the treble setting.

11. BASS CONTROL

Turn to change the bass setting.

12. MASTER VOLUME

Turn to adjust the overall output level/volume.

13. POWER ON/OFF SWITCH

Turn the device on/o . ff

14. PO SUWER PPLY INPUT

REMOTE CONTROL FUNCTION

1. POWER ON/OFF

Turn the device ON or OFF.

2. MODE

Press to choose between USB/SD, BT.

3. MUTE

By pressing this button, the device will be muted.

4. PLAY/PAU SE

Start/resume or pause play by pressing this button.

5. PREVIOUS/N TRACK EXT

Skip to previous or next track by pressing these buttons.

6. EQ

Press to choose EQ preset.

7. VOLUME UP/DOWN

Press to adjust the volume to the desired level.

8. USB OR SD

Choose between USB and SD input modes.

9. REPEAT

Press to repeat one song or complete folder.

10. NUMPAD

Use for choosing tracks directly.

BT CONNECTION

1. Activate the on your device ile p ne, tablet etc.) which you want to play the music. BT (Mob ho

See the operating instructions r that device. fo

2. Press the -function. the “MODE” button and activate BT

3. MOVE80Select “ ” on your device and pair. BT

Attention: distance is approx. meter without any barrier. BT 10

Specyfikacje produktu

Marka:	Fenton
Kategoria:	system hi-fi
Model:	MOVE80
Kolor produktu:	Czarny
Rodzaj zasilania:	AC, Battery
Typ kontroli:	Bezprzewodowy
Wysokość produktu:	470 mm
Szerokość produktu:	220 mm
Waga produktu:	4900 g
W zestawie pilot zdalnego sterowania:	Tak
Wbudowane głośniki:	Tak
Wtyk słuchawek:	3,5 mm
Port USB:	Tak
Obsługiwane typy kart pamięci:	MicroSD (TransFlash)
Przeznaczenie:	Przenośny
Zintegrowany czytnik kart:	Tak
Diody LED:	Zasilanie
Mikrofon:	Przewodowa
Regulacja głośności:	obrotowy
Częstotliwość adaptera AC:	50-60 Hz
Napięcie wejściowe adaptera AC:	100-240 V
Uchwyty do przenoszenia:	Tak
Długość produktu:	360 mm
Nagrywanie:	Tak
Efekt echa:	Tak