Instrukcja obsługi Fenix TK32

Fenix Flesz TK32

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fenix TK32 (4 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Fenix TK32 Flashlight User Manual

400 meters (437 yards) from a palm- sized light? No, you are not mistaken. The TK32

Flashlight drives deep downrange to 400 meters -with 900 lumen output. Balanced for

easy carry, the light also features red, green and blue LEDs and the dual tail switch

system color flashlight. -is all you need to control this multi

Technical Parameters

ANSI/NEMA

FL1

Turbo

High

Mid

Low

OUTPUT

900

lumens

400

Lumens

130

Lumens

RUNTIME

1h30min

3h45min

13h

15 0h

DISTANCE

400m（Max）

INTENSITY

40000cd（Max）

IMPACT

RESISTANT

WATER

RESISTANT

IPX-8 ( 2 meters underwater)

ACCESSORIES

Holster, lanyard and spare O- ring

Notice: The above-mentioned parameters (lab- -tested by Fenix using ARB L2S 18650

Li-ion battery) are approximate and may vary between flashlights, batteries and

environments.

The flashlight will drop down into the high brightness level after working about 15 minutes

in the Turbo mode. Therefore, the runtime of Turbo output is an accumulated time.

● Utilizes Cree XM-L2 (U2) LED with a lifespan of 50,000 hours

● I ntegrated Red, Green and Blue LEDs with 100mW output

● Uses one 18650 rechargeable Li- ion battery or two CR123A batteries

● 159 mm (Length) 25.4 mm (Body Diameter) 52mm (Head Diameter)× ×

● 180- gram weight (excluding batteries)

● Digitally regulated output - maintains constant brightness

● Low-voltage warning function to remind users of low power

● Reverse polarity protection to protect from improper battery installation

● Anti- - roll, slip resistant body design

● Dual tail switch for momentary-on and output selection

● Made of durable aircraft-grade aluminum

● Premium Type III hard- -anodized anti abrasive finish

● Toughened ultra-clear glass lens with anti- reflective coating

Operation

Momentary- on

Slightly press and hold the tail power switchTK32’s .

Constant- on

Fully press the tail power switch to turn the light on, pressing again to turn the light off.

Output selection

When the light is on, press the tail mode switch to cycle through four brightness levels in

the order of Turbo>Low>Mid>High

Colored LEDs

When the light is on, press and hold the mode switch for one second to light up the

colored LEDs. P ress the mode switch to cycle through them in the order of

Red>Green>Blue. Press and hold the mode switch for one second to return to white light.

Instant access to red light

When the light is off, press and hold the mode switch to activate the red light momentarily

Intelligent memory circuit

White light

The flashlight memorizes the last used output of white light. The next time you turn the

flashlight on; . it will activate the last used brightness level of white light

Colored LEDs

The flashlight memorizes the last used The next time you colored LED. switch from the

white light to colored ctivate the last light, it will a used color.

Over-heat Protection:

TK32 will accumulate a lot of heat when it is working in Turbo output. To avoid

overheating, the flashlight will automatically drop down into the High brightness level after

working in Turbo output for 15 minutes. If the non-stop Turbo output is needed, just reset it

again.

Low-voltage Warning Function

When the voltage level drops below the preset level, the flashlight will downshift to a lower

brightness level. When the voltage level drops below the threshold voltage in Low output

mode, the flashlight will blink three times every five minutes to remind you to replace the

battery.

Battery Specifications

Type

Dimensions

Nominal

voltage

Usability

FENIX ARB- L2 Series

18650

3.7V/3.6V

Recommend

√

Non-rechargeable

Battery

(Lithium)

CR123A

Recommend

√

Rechargeable Battery

(Li- ion)

16340

3.7V/3.6V

Cautious*

Rechargeable Battery

(Li- ion)

18650

3.7V/3.6V

Cautious*

Rechargeable Battery

（）LiFePO4

16340

3.2V

Usable

√

Rechargeable Battery

（）LiFePO4

18650

3.2V

Usable

√

Warning: Please do not mix batteries of different brands, size, capacity or type. Doing so

may cause damage to the flashlight or the batteries being used.

* -18650 /16340 Li ion batteries are powerful cells designed for commercial applications

and must be treated with caution and handled with care. Quality batteries with circuit

protection will reduce the potential risk for combustion or explosion but cell damage or

short circuiting are potential risks the user assumes.

Battery Replacement

Unscrew the tail cap to insert the batteries with the anode side (+) toward the light's head,

then align the threads and screw the tail cap back on.

Usage and Maintenance

◎Please don't disassemble the sealed head, doing so can cause damage to the flashlight

and will void the warranty.

◎We recommend the use of high quality battery. If the flashlight is not to be used for an

extended period, remove the battery, or the flashlight could be damaged by electrolyte

leakage or battery explosion.

◎Due to the momentary-on tactical switch, the flashlight may be accidentally activated

when stored, transported or placed in a pocket. Unscrew the tail cap one-half turn or take

out the battery to avoid unwanted operation.

◎The o-ring may be worn out after using for a long time. If this happens, please replace

the o- ring with a new one to keep the flashlight properly sealed against water.

◎Please clean the contacts of your light from time to time, especially if the light flickers or

doesn't light up. There may be several reasons for a flickering or not working light:

Reason A: The battery needs replacing.

Specyfikacje produktu

Marka:	Fenix
Kategoria:	Flesz
Model:	TK32
Kolor produktu:	Czarny
Materiał obudowy:	Aluminium
Wbudowany wyłącznik:	Tak
Wysokość produktu:	159 mm
Szerokość produktu:	254 mm
Głębokość produktu:	254 mm
Waga produktu:	180 g
Typ lamp:	LED
Ilość lamp:	1 lamp(y)
Lampy:	10 W
Wodoodporny:	Nie
Liczba poziomów zasilania:	4
Typ latarki:	Latarka ręczna
Klasa ochrony:	III
Żywotność lamp:	50000 h
Odległość wiązki światła (max):	400 m
Magnes:	Nie