Instrukcja obsługi Fellowes Powershred PS-12Cs

Fellowes Niszczarka do papieru Powershred PS-12Cs

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fellowes Powershred PS-12Cs (8 stron) w kategorii Niszczarka do papieru. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Quality Office Products Since 1917
POWERSHRED®
PS-12Cs
Please read these instructions before use.
Do not discard: keep for future reference.
Veuillez lire ces instructions avant d’utiliser l’appareil.
Ne pas jeter : conserver afin de consulter les directives
ultérieurement, en cas de besoin.
Lea estas instrucciones antes del uso.
No las deseche: consérvelas como referencia futura.
2
KEY
CAPABILITIES
ENGLISH
Model PS-12Cs
Will shred: Paper, small paper clips, credit cards and staples
Will not shred: Continuous forms, CD/DVDs, adhesive labels, transparencies,
newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic
other than noted above
Paper shred size:
Cross-Cut ........................................................5/32 in. x 2 in. (3.9mm x 50mm)
Maximum:
Sheets per pass .................................................................................................12*
Cards per pass .....................................................................................................1*
Paper width ......................................................................................9 in. (229mm)
* 8.5 in. p2-x11 in., 20lb., (75g) paper at 120V/60 Hz, 5.0Amps; heavier paper, humidity or
other than rated voltage may reduce capacity. Recommended daily usage rates: 120 sheets;
10 credit cards. 12 sheets per pass.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
H. Control switch and LEDs
I 1. Auto-On
O 2. OFF
R 3. Reverse
4. Standby (green)
5. SafeSense
®
Technology
(yellow)
6. Overheat (red)
A. Shredder head
B. Paper/credit card entry
C. Pull-out bin
D. Window
E. Safety Lock
F. Disconnect power switch
1. OFF
2. ON
G. See safety instructions
2
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
UÊ ii«Ê>Ü>ÞÊvÀÊV`ÀiÊ>`Ê«iÌðÊii«Ê>`ÃÊ>Ü>ÞÊvÀÊ«>«iÀÊiÌÀÞ°ÊÜ>ÞÃÊ
set to off or unplug when not in use.
UÊ ii«ÊvÀi}ÊLiVÌÃÊqÊ}ÛiÃ]ÊiÜiÀÞ]ÊVÌ}]Ê>À]ÊiÌV°ÊqÊ>Ü>ÞÊvÀÊÃÀi``iÀÊ
openings. If object enters top opening, switch to Reverse (R) to back out object.
UÊ iÛiÀÊÕÃiÊ>iÀÃÊ«À`ÕVÌÃ]Ê«iÌÀiÕÊL>Ãi`ÊÕLÀV>ÌÃÊÀÊÌiÀÊv>>LiÊ
products on or near shredder. Do not use canned air on shredder.
UÊ ÊÌÊÕÃiÊvÊ`>>}i`ÊÀÊ`iviVÌÛi°ÊÊÌÊ`Ã>ÃÃiLiÊÃÀi``iÀ°
Do not place near or over heat source or water.
UÊ "«iÀ>Ì]Ê>Ìi>Vi]Ê>`ÊÃiÀÛViÊÀiµÕÀiiÌÃÊ>ÀiÊVÛiÀi`ÊÊÌiÊÃÌÀÕVÌÊ
manual. Read the entire instruction manual before operating shredders.
UÊ /ÃÊÃÀi``iÀÊ>ÃÊ>ÊÃViVÌÊ*ÜiÀÊ-ÜÌVÊ®ÊÌ>ÌÊÕÃÌÊLiÊÊÌiÊ" Ê–)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
UÊ Û`ÊÌÕV}ÊiÝ«Ãi`ÊVÕÌÌ}ÊL>`iÃÊÕ`iÀÊÃÀi``iÀÊi>`°
UÊ -Ài``iÀÊÕÃÌÊLiÊ«Õ}}i`ÊÌÊ>Ê«À«iÀÞÊ}ÀÕ`i`ÊÜ>ÊÕÌiÌÊÀÊÃViÌÊvÊÌiÊ
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
UÊ ,Ê<,ÊqÊÊ "/ÊÃÀi`Ê}ÀiiÌ}ÊV>À`ÃÊÜÌÊÃÕ`ÊV«ÃÊÀÊL>ÌÌiÀið
UÊ ÀÊ`ÀÊÕÃiÊÞ°Ê
UÊ 1«Õ}ÊÃÀi``iÀÊLivÀiÊVi>}ÊÀÊÃiÀÛV}°
Warning: NOTE: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Ê UÊÊ,iÀiÌÊÀÊÀiV>ÌiÊÌiÊÀiViÛ}Ê>Ìi>°
Ê UÊÊVÀi>ÃiÊÌiÊÃi«>À>ÌÊLiÌÜiiÊÌiÊiµÕ«iÌÊ>`ÊÀiViÛiÀ°
Ê UÊÊiVÌÊÌiÊiµÕ«iÌÊÌÊ>ÊÕÌiÌÊÊ>ÊVÀVÕÌÊ`vviÀiÌÊvÀÊÌ>ÌÊÌÊÜVÊÌiÊÀiViÛiÀÊÃÊViVÌi`°
Ê UÊÊÃÕÌÊÌiÊ`i>iÀÊÀÊ>ÊiÝ«iÀiVi`ÊÀ>`É/6ÊÌiVV>ÊvÀÊi«°
A. G.
B.
H.
F
D.
C.
E.
3
BASIC PRODUCT MAINTENANCE
All cross-cut shredders require oil for peak performance.
If not oiled, a machine may experience diminished
sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty
your waste bin.
OILING SHREDDER
PAPER/CARD
BASIC SHREDDING OPERATION
Continuous operation:
4-5-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
4-5-minutes will trigger
20-minute cool down period.
PAPER JAM
ADVANCED PRODUCT FEATURES
SAFESENSE® TECHNOLOGY OPERATION
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
TROUBLESHOOTING
A. Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum
operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will
not operate for the duration of the recovery time. See Basic Shredding Operation for more information
about the continuous operation and recovery time for this shredder.
B. SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate
and the shredder will stop shredding.
A
1 2 3
Press Auto-On (I) Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
Alternate slowly back and forthSet to Reverse (R) Set to Off (O)
and unplug
Pull uncut paper from
paper entry
Set to Reverse (R)
5
1 32 4 6
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Set to Reverse (R)
2-3 seconds
* Apply oil
across entry
Set to Off (O)
1 2 3
1
Set to Off (O) Press Auto-On ( I )
3
Feed into paper
entry and release
2
Hold card at edge
4 5
Feed into center of
entry and release
Set to Off (O)
6
OR
A B

Specyfikacje produktu

Marka: Fellowes
Kategoria: Niszczarka do papieru
Model: Powershred PS-12Cs

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fellowes Powershred PS-12Cs, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niszczarka do papieru Fellowes

Fellowes

Fellowes Powershred 79Ci Instrukcja

15 Października 2024
Fellowes

Fellowes Powershred C-525 Instrukcja

8 Października 2024
Fellowes

Fellowes Powershred 225i Instrukcja

5 Października 2024
Fellowes

Fellowes Microshred 94MC Instrukcja

4 Października 2024
Fellowes

Fellowes MicroShred MS-450Cs Instrukcja

29 Września 2024
Fellowes

Fellowes P-35C Powershred Instrukcja

24 Września 2024
Fellowes

Fellowes Powershred 1200C Instrukcja

21 Września 2024
Fellowes

Fellowes DS-12CS Instrukcja

17 Września 2024
Fellowes

Fellowes Intellishred PS-79Ci Instrukcja

14 Września 2024
Fellowes

Fellowes Powershred 450M Instrukcja

13 Września 2024

Instrukcje Niszczarka do papieru

Najnowsze instrukcje dla Niszczarka do papieru

GBC

GBC Momentum X26-32 Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 300M Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 150X Instrukcja

8 Października 2024
GBC

GBC Momentum X18-12 Instrukcja

8 Października 2024
GBC

GBC AutoFeed+ 300X Instrukcja

8 Października 2024
Bonsaii

Bonsaii S120-C Instrukcja

7 Października 2024
Bonsaii

Bonsaii C209-D Instrukcja

7 Października 2024
Bonsaii

Bonsaii 4S30 Instrukcja

7 Października 2024
Bonsaii

Bonsaii 3S16 Instrukcja

7 Października 2024
Peach

Peach PS300-21 Instrukcja

7 Października 2024