Instrukcja obsługi Fellowes MobilePro Series 8201901

Fellowes klawiatura MobilePro Series 8201901

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fellowes MobilePro Series 8201901 (40 stron) w kategorii klawiatura. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/40
PLEASE READ INSTRUCTIONS BEFORE USE.
DO NOT DISCARD.
LIRE LES INSTRUCTIONS AVANT UTILISATION.
NE PAS JETER.
LEA LAS INSTRUCCIONES ANTES DEL USO.
NO TIRAR.
BITTE LESEN SIE DIE ANLEITUNGEN SORGFÄLTIG DURCH,
BEVOR SIE DAS GERÄT BENUTZEN.
BITTE GUT AUFBEWAHREN.
LEGGERE LE ISTRUZIONI PRIMA DELL’USO.
NON GETTARE.
LEES VÓÓR GEBRUIK DE INSTRUCTIES DOOR.
NIET WEGGOOIEN.
LÄS DESSA INSTRUKTIONER FÖRE ANVÄNDNING.
KASSERA EJ.
PRZED UŻYCIEM PROSZĘ PRZECZY TAĆ NINIEJSZĄ INSTRUKCJĘ.
NIE WYRZUCAĆ.
ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПРОСЬБА ОЗНАКОМИТЬСЯ С ИНСТРУКЦИЯМИ.
НЕ ВЫБРАСЫВАТЬ.
LEIA AS INSTRUÇÕES ANTES DA UTILIZAÇÃO.
NÃO AS DEITE FORA.
MobilePro Series™
Bluetooth® Keyboard with Carrying Case
Clavier Bluetooth® avec étui de transport
Teclado Bluetooth®
con funda de transporte
Bluetooth® Tastatur mit Tragetasche
Tastiera Bluetooth® con borsa da trasporto
Bluetooth®-toetsenbord met draagkoffer
Bluetooth®-tangentbord med väska
Klawiatura Bluetooth® z etui
Клавиатура Bluetooth® с футляром для переноски
Teclado Bluetooth® com mala de transporte
2
CONTENTS
Bluetooth® Keyboard, Charging Cable and Carrying Case with Wrist Support.
USER MANUAL
Thank you for choosing Fellowes. For optimum performance, please read this instruction guide carefully before
operation. Keep for reference.
APPEARANCE
GETTING STARTED
1. BUTTONS
On/Off Slider Switch: Slide switch ON or OFF to turn the device ON or OFF
Connect Button: After the On/Off Slider Switch is in the ON position, press the Connect Button.
The keyboard is now ready to connect to your device.
2. STATUS LIGHTS
Caps Lock Light: Light will glow blue when Caps Lock is activated.
Bluetooth® Status Light: Press the Connect Button. The Bluetooth® Status Light will blink blue until the
keyboard connects with your device. After connecting with your device the blue light will turn off.
Charging Light: Light will glow red while the keyboard is charging. When the keyboard is fully charged the
light will turn off.
Power Light: Slide the On/Off Slider Switch to ON. The blue status light will illuminate for four seconds
and turn off to save power. Your keyboard is still on.
Charge PowerCAPS
Connect OFF/ON
Power Light
Charging Light
Bluetooth® Status Light
1
3
5
On/Off Slider
Connect Button
Caps Lock Light
2
4
6
Charge PowerCAPS
Connect OFF/ON
Esc/HomeESC Key
Virtual Keyboard
Select All
Copy
Paste
Cut
Change Language
Back
Play/Pause
Next
Mute
Volume Down
Volume Up
Lock/DeleteDelete
*Press and hold down “FN” key and other funcon key simultaneously
Show Keyboard
Select All
Copy
Paste
Cut
Change Language
Play Previous Track
Play/Pause
Play Next Track
Mute
Volume Down
Volume Up
Lock/Delete*
Show Keyboard
Select All
Copy
Paste
Cut
Change Language
Play Previous Track
Play/Pause
Play Next Track
Mute
Volume Down
Volume Up
Lock
No Funconality
Select All*
Copy*
Paste*
Cut*
No Funconality
Play Previous Track*
Play/Pause*
Play Next Track*
Mute*
Volume Down*
Volume Up*
Delete
Key Funcon Key Icon Funconality on iOS Funconality on Android Funconality on Windows
F n
Home Home Opens Browser Window*
ENGLISH
3
PAIRING INSTRUCTIONS
PAIRING WITH iOS ®
Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and
then turn off to save power. Your keyboard is still on.
Step 2: On the iOS device, select: Settings – General – Bluetooth® – On.
Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will be blinking blue).
Step 4: The iOS device will display “Fellowes keyboard” as an available device.
Step 5: Select “Fellowes keyboard” on the iOS device. The iOS device will display a code.
Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the iOS device.
Step 7: Switch the keyboard to iOS mode by holding the “Fn” key down and hitting the “Q” key.
SPECIFICATION
1. Working voltage: 3.0-4.2 V
2. Working current: < 2.5 mA
3. Standby current: < 0.3 mA
4. Charging current: > 100 mA
5. Operating temperature: -10 to 55 C°
6. Operating distance: Up to 10 meters
7. Charging time: < 4 hours
8. Lithium battery capacity: 280 mA
9. Battery working time: 90 hours
10. Battery life: 3 years
11. Battery size: 3.8 x 20 x 35mm
12. Keystroke life: 3 million strokes
13. Standby time: 90 days
PAIRING WITH ANDROID™
Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and
then turn off to save power. Your keyboard is still on.
Step 2: On the device, select Settings -> Bluetooth® -> Turn Bluetooth® on, and select “scan for devices”.
Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will blink blue).
Step 4: The Android device will display “Fellowes keyboard” as an available device.
Step 5: Select “Fellowes keyboard” on the Android device. The Android device will display a code.
Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the Android device.
Step 7: Switch the keyboard to Android mode by holding the “Fn” key down and hitting the “W” key.
PAIRING WITH WINDOWS®
Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and
then turn off to save power. Your keyboard is still on.
Step 2: On the device, go to Settings -> PC + Devices -> Bluetooth® -> Turn Bluetooth® on, and select
“search for a device”.
Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will blink blue).
Step 4: The Windows device will display “Fellowes keyboard” as an available device.
Step 5: Select “Fellowes keyboard” on the Windows device. The Windows device will display a code.
Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the Windows device.
Step 7: Switch the keyboard to Windows mode by holding the “Fn” key down and hitting the “E” key.
1. Plug the Micro-USB charging cable into the keyboard.
2. Plug the USB port into a computer or power adapter, if you have one - not included.
3. Charge for 4 hours or until the charge indicator light turns off.
Charge PowerCAPS
Connect OFF/ON
CHARGING INSTRUCTIONS
Glowing Red Battery needs charging/charging in progress
Turns Off Battery is fully charged
Charge
POWER SAVE MODE
The keyboard will enter sleep mode after being idle for 15 minutes. To activate it from sleep mode, press any
key and wait 3 seconds.

Specyfikacje produktu

Marka: Fellowes
Kategoria: klawiatura
Model: MobilePro Series 8201901

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fellowes MobilePro Series 8201901, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klawiatura Fellowes

Fellowes

Fellowes MobilePro Series Instrukcja

28 Sierpnia 2024
Fellowes

Fellowes MobilePro Series 8201901 Instrukcja

27 Sierpnia 2024

Instrukcje klawiatura

Najnowsze instrukcje dla klawiatura

SMK-Link

SMK-Link VP6340 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link VP6510 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link VP6342 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link VP3800 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link Blu-Link VP6640 Instrukcja

17 Grudnia 2024
Xcellon

Xcellon KBM-ABWSG Instrukcja

17 Grudnia 2024
Boss

Boss Rhythm Partner DR-01S Instrukcja

15 Grudnia 2024
Medeli

Medeli MK1 Instrukcja

15 Grudnia 2024
HyperX

HyperX Alloy Origins 65 Instrukcja

15 Grudnia 2024
4ms

4ms Row Power 35 Instrukcja

15 Grudnia 2024