Instrukcja obsługi Fellowes Fortishred HS-1010

Fellowes Niszczarka do papieru Fortishred HS-1010

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fellowes Fortishred HS-1010 (4 stron) w kategorii Niszczarka do papieru. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Quality Office Products Since 1917
POWERSHRED
®
HS-1010
Please read these instructions before use.
Do not discard: keep for future reference.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keepawayfromchildrenandpets.Keephandsawayfrom
paperentry.Alwayssettoofforunplugwhennotinuse.
• Keepforeignobjects–gloves,jewelry,clothing,hair,
etc.–awayfromshredderopenings.Ifobjectenterstop
opening,switchtoReverse( )tobackoutobject.R
• Neveruseaerosolproducts,petroleumbasedlubricantsor
otherflammableproductsonornearshredder.Donotuse
cannedaironshredder.
• Donotuseifdamagedordefective.Donotdisassemble
shredder.Donotplacenearoroverheatsourceorwater.
• ThisshredderhasaDisconnectPowerSwitch(C)inthedoor.Thedoor
mustbeclosedtooperateshredder.Incaseofemergency,opendoor.
Thisactionwillstopshredderimmediately.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• Shreddermustbepluggedintoaproperlygroundedwalloutletor
socketofthevoltageandamperagedesignatedonthelabel.The
groundedoutletorsocketmustbeinstalledneartheequipmentand
easilyaccessible.Energyconverters,transformers,orextensioncords
shouldnotbeusedwiththisproduct.
• Donotoperatethemachinewithoutthesafetyflapclosed(A).
Willshred:Paperonly
Willnotshred:Adhesivelabels,continuousformpaper,transparencies,
newspaper,junkmail,creditcards,CD/DVDs,staples,paperclips,
cardboard,laminates,filefolders,X-raysorplasticotherthannotedabove
Papershredsize:
HighSecurityMicro-Cut....(Din6)1/32in.x3/16in.(0.8mmx5.0mm)
Maximum:
Sheetsperpass.................................................................................10*
Paperentrywidth...........................................................12in.(305mm)
*8.5in.x11in.,20lb.,(75g)paperat120V,60Hz,15Amps;heavier
paper,humidityorotherthanratedvoltagemayreducecapacity.
Recommendedmaximumdailyusagerates:5,000sheetsperday.10
sheetsperpass.
* In order to perform at capacity, shredder must be plugged into
a dedicated 20Amp, 120V outlet and auto oil system must
be engaged.
H.ControlPanelandLEDs
 1.ON/OFF
R
 2.Reverse
 3.Binfull
 4.Dooropen
 5.SafetyFlapOpen
 6.Lowoil
 7.Autooilcomplete
A.SafetyFlap
B.Paperentry
C.Disconnectswitch(opendoor)
D.Door
E.Basket-paper(inside)
F. Casters
G.Seesafetyinstructions
1
ENGLISH
ModelHS-1010
KEY
INDICATOR LIGHTS
CAPABILITIES
ADVANCED PRODUCT FEATURES
Stopsautomatically
whendooris
opened.Symbols
flashalternately
Stopsautomatically
whenbinisfull.
Emptybagwhen
bagfullindicator
lightsup
Stopsautomatically
iftoomuch
paperisinserted.
Automaticreverse
ifpaperjams
Stopsautomatically
ifsafetyflapis
opened.Symbols
flashalternately
Overloadprotection.
Machinestopstocool
down-approx.10-15
minutes.Symbols
flashalternately
Cuttingshaftsare
automaticallyoiled
Oilbottleisempty
Sleep Mode
Energysavingfeatureshutsdown
theshredderafter1hourofinactivity
Auto Oil™
Lubricatesthecuttersautomaticallytoenhance
performanceandextendshredderlife
A.
B.
G.
H.
F.
E.
D.
C.
R
SHREDDER SET-UP
OILING SET-UP
PAPER
Ensureaccess
toadedicated
20Amp,120V
outlet
2
BASIC SET-UP BASIC SHREDDING OPERATION
Pluginandmake
suredoorisclosed Press( )ONto
activate Whenfinished
shreddingsetto
( )OFF
Feedpaper
straightintopaper
entryandrelease
Donothingand
shredderwillgo
automaticallyto
sleepmodeafter
1hour
Makesuresafety
flapissecurely
inplace
•Emptywastebasketwhenbinfullindicatorlightsup.
•Shredderwon’trunifthedoorisopen,orbinneedstobeemptied.
•Maintenanceisanimportantpartofprotectingyourinvestment.Don’tforgettopurchaseouroil(3505801)andshredderbags(3604101).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
LIMPIEZA DE LOS SENSORES INFRARROJOS DE INICIO AUTOMÁTICO
Eliminates frustrating jams by preventing overloads.
Removelid
fromoilbottle
Putoiltubeintooil
bottleandscrew
stopperon
Placeoilbottle
intooilholderon
sideifcabinet
Closedoor.Plug
intosocket-outlet Oilpumpstarts
automaticallyon
firstuse.TostopOil
Indicator( )from
blinkingred,press
ON( )after15
seconds
Afterchangingoil
bottle,pressReverse
(R)untilOilIndicator
( )nolonger
blinksred
R
R
5 6 7 84321
Hookoil
bottleholder
intosideof
cabinet
Removeoilbottle
holderfrom
cabinet
SHEET CAPACITY GAUGE
PAPER JAM
TROUBLESHOOTING AND PREVENTIVE MAINTENANCE
SLEEP MODE
CLEANING AUTO-START INFARED SENSORS
Electronicallymeasurespaperthicknesstoprevent
paperjams:
R
UptoRED:Toomanysheetshavebeen
inserted.Automaticreverseofpaper.
UptoYELLOW:Maximumsheetcapacity.
UptoGREEN:Normalsheetcapacity
duringshreddingprocess.
Insleepmode Togetoutofsleep
pressON( )insertpaperor
WHEN IN SLEEP MODE
SettoOff( )andemptybin.Replacebinandfollowthebelow
procedures.
Stopsautomatically
iftoomuchpaper
isinserted.
Automaticreverse
ifpaperjams
Gentlypulluncut
paperfrom
paperentry.
Machinerunsfor
ashorttimein
reverse.Repeatif
necessary
ShredOneSheet
Paperdetectionsensorsaredesignedformaintenancefreeoperation.However,on
rareoccasionsthesensorsmaybecomeblockedbypaperdustcausingthemotorto
runevenifthereisnopaperpresent(Note:twopaperdetectionsensorsarelocatedinthecenter
ofthepaperentry).
Turnoffand
unplugshredder LocateAuto-start
infaredsensor Cleanany
contaminationfrom
thepapersensors
Usethin,long-handled
brushtocleansensors.
Makesurebrushis
cleananddry
TO CLEAN THE SENSORS
3
R
2
1
2
1 3
12 3
R
4
R
or
4 51 3
R
2
12

Specyfikacje produktu

Marka: Fellowes
Kategoria: Niszczarka do papieru
Model: Fortishred HS-1010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fellowes Fortishred HS-1010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niszczarka do papieru Fellowes

Fellowes

Fellowes Powershred 325Ci Instrukcja

12 Stycznia 2025
Fellowes

Fellowes Powershred LX25M Instrukcja

12 Stycznia 2025
Fellowes

Fellowes Powershred 79Ci Instrukcja

15 Października 2024
Fellowes

Fellowes Powershred C-525 Instrukcja

8 Października 2024
Fellowes

Fellowes Powershred 225i Instrukcja

5 Października 2024
Fellowes

Fellowes Microshred 94MC Instrukcja

4 Października 2024
Fellowes

Fellowes MicroShred MS-450Cs Instrukcja

29 Września 2024
Fellowes

Fellowes P-35C Powershred Instrukcja

24 Września 2024
Fellowes

Fellowes Powershred 1200C Instrukcja

21 Września 2024
Fellowes

Fellowes DS-12CS Instrukcja

17 Września 2024

Instrukcje Niszczarka do papieru

Najnowsze instrukcje dla Niszczarka do papieru

Insignia

Insignia NS-S10CCBK Instrukcja

12 Marca 2025
Honeywell

Honeywell 9316DS Instrukcja

11 Lutego 2025
Olympia

Olympia PS 58 CC Instrukcja

11 Stycznia 2025
Olympia

Olympia PS 53 CC Instrukcja

11 Stycznia 2025
Bonsaii

Bonsaii S123-B Instrukcja

10 Stycznia 2025
Bonsaii

Bonsaii C206-G Instrukcja

10 Stycznia 2025
GBC

GBC AutoFeed+ 100M Instrukcja

4 Stycznia 2025
GBC

GBC ShredMaster SM15-08 Instrukcja

4 Stycznia 2025
GBC

GBC ShredMaster PX10-06 Instrukcja

4 Stycznia 2025
GBC

GBC Momentum X22-23 Instrukcja

4 Stycznia 2025