Instrukcja obsługi Felisatti SG6

Felisatti szlifierka SG6

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Felisatti SG6 (36 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
TECHNICAL DATA
Straight grinder SG6/750 SG6/1000CE
Input power W 750 1000
No-load speed r.p.m. 27000 12000-27000
Maximum diameter of grinding wheel/disc mm 25 25
Clip diameter mm 6 6
A
pprox. weight (without acces.) Kg. 1.4 1.5
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at
hand to use when carrying out maintenance on the
indicated parts.
If the machine is used carefully and normal maintenance
is carried out, it will work well for a long time.
The functions and use of the tool you have bought shall
be only those described in this manual. Any other use
of the tool is strictly forbidden.
ILLUSTRATIONS
DESCRIPTION (See figures)
A Start-up switch (Fig.1)
B Clamping nut (Fig.1)
C Speed adjustment (Fig.1) (Mod. SG6/1000CE)
EQUIPMENT
- Clip, ∅6 mm
- Fixed spanner 13 mm
- Fixed spanner 17 mm
- Operating instructions
- Safety instructions
- Warranty
SAFETY INSTRUCTIONS
• See “Safety Instructions” manual, supplied with this
instruction manual.
• WARNING! Do not grind material containing amian-
thus. Working with materials containing amian-
thus/asbestos and/or silica stones produces a dust,
which is harmful to health. Protect yourself from inha-
ling this dust, in compliance with current regulations on
accident prevention.
• For your personal safety, always connect the machine
to a mains supply protected by a differential and ther-
mal cutout switch, in accordance with regulations on
low-voltage wiring sitemaps.
• Do not pierce the motor housing as this could damage
the double insulation (use adhesive labels).
• Check the work area with a metal detector for hidden
wires, gas and/or water pipes.
• Always unplug the machine before carrying out work
on it.
• Always stop the machine by switching it off, not by
unplugging it.
• WARNING! Before each use, inspect the plug and
lead. Should they need replacing, have this done by an
official service centre.
• Always keep the mains lead clear of the working range
of the machine.
• Only plug the machine in when it is switched off.
• Hold the machine firmly in both hands and in a stable
position.
• Verify that the speed marked on the grinding disc or
wheel is equal to or higher than the straight grinder
rated speed.
• Ensure that the grinding disc or wheel dimensions are
compatible with the straight grinder.
• Abrasive grinding wheels or discs must be handled
and stored with care in accordance with the manufac-
turer’s instructions.
• Protect the sanding tool from knocks, blows and grease.
• The grinding disc or wheel must be carefully checked
before being used to ensure that it is not damaged or
cracked. All damaged or cracked grinding discs or
wheels must be immediately replaced.
• All grinding discs and wheels must be carefully moun-
ted in accordance with the manufacturer’s instructions.
• The machine should be used for dry cutting and grin-
ding only.
• Check that the disc has been properly fitted and secu-
red before using the machine. Start the machine with
no load and run for 30 seconds in a safe position; if
you notice serious vibration or any other defect stop
the machine immediately. This may be a sign of incor-
rect fitting or a badly balanced disc.
• Ensure that the part to be worked on is firmly secured
before beginning any grinding or cutting operation.
• Never use cutting discs for deburring. Do not subject
cutting discs to lateral pressure.
• Beware of shavings that fly off. Hold the tool that so
that sparks fly away from you or other people and in-
flammable materials.
• When working on stone, use dust extraction equipment
and wear a mask.
• When working with the machine, always wear safety
goggles and ear protection. Other personal protection
equipment such as dust masks, gloves, helmet and
apron should be worn when necessary, along with non-
slip safety footwear. A dust mask is required when the
dust from the material deburred, such as paint or other
coating, is harmful. If in doubt, use safety equipment.
• Make sure the vents are free when working with dust. If
they require cleaning, first unplug the machine, do not
use metal objects and avoid damaging internal parts.
• Do not touch the sanding/grinding tools when rotating.
• WARNING! The wheel keeps moving for a long time
after the machine has been switched off.
BRIEF DESCRIPTION
This straight grinder has been designed to dock, rough
grind or plane metal and stone materials without the
need for a water supply.

Specyfikacje produktu

Marka: Felisatti
Kategoria: szlifierka
Model: SG6

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Felisatti SG6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje szlifierka Felisatti

Felisatti

Felisatti SG6 Instrukcja

24 Września 2024

Instrukcje szlifierka

Najnowsze instrukcje dla szlifierka

HiKOKI

HiKOKI GP2S2 Instrukcja

15 Października 2024
Makita

Makita GA9060R Instrukcja

14 Października 2024
Hitachi

Hitachi G 13SR Instrukcja

14 Października 2024
Makita

Makita DGA700Z Instrukcja

12 Października 2024
Einhell

Einhell NBG 150 Instrukcja

9 Października 2024
Einhell

Einhell TE-AG 18/100 Li-Solo Instrukcja

9 Października 2024
Einhell

Einhell TC-AG 100 Instrukcja

9 Października 2024
Einhell

Einhell MWS 115/2 Instrukcja

9 Października 2024
Einhell

Einhell Professional TP-AG 2320 Instrukcja

9 Października 2024
Einhell

Einhell RT-AG 230/180 Instrukcja

9 Października 2024