Instrukcja obsługi FBT DLM 26

FBT nieskategoryzowany DLM 26

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla FBT DLM 26 (66 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/66
FBT Elettronica SpA - Via P. SOPRANI 1 - Zona Ind.le SQUARTABUE - 62019 RECANATI - ITALY
Tel. 071.750591 - Fax. 071.7505920 - P.O. BOX 104 - Email: info@fbt.it - www.fbt.it
User Manual
DLM26 Digital Speaker Processor
User Manual
Described below are the functions of the front panel control buttons and encoders for the DLM26.
• Getting Started
As soon as the DLM26 is turned ON the device model name will appear in the LCD screen:
and a status bar will show the progress of the DLM26 initialization process:
The DLM26 has three factory pre-set working modes: “2x2 Ways Xover + Sub”, “2x3 Ways Xover”
and “6 Ways Xover”.
After the initialization, the DLM26 will show on the LCD the first of the embedded preset working
modes, or the last one selected prior to the unit being turned off.
First time activation will default to the first of the preset working modes.
DLM26
Speaker Management
DLM26
2x3 WAY X-OVER
DLM26
• Encoders and ENTER, ESC buttons
The DLM26 is equipped with 3 Relative Encoders, “NAV/Param.1”, “Param.2” and “Param.3”,
These encoders allow you to navigate the user interface and edit sections of the processor. They
allow the user to navigate within the screen for the selection of sub-menus, pages and parameters
and to select the values to be assigned during the editing operations.
The “ENTER” and “ESC” buttons allow the user to confirm or NOT confirm the operations
performed by the encoders.
• UTILITY, A/B and 1/2/3/4/5/6 buttons
The UTILITY button allows the User to enter the Sub-menus and set the general characteristics of
the Processor. The A and B buttons allow the User to enter the Editing Menus of the Processor's
Input Channels and buttons 1, 2, 3, 4, 5 and 6, allow the User to enter the Editing Menus of the
Processor's Output Channels.
The A and B buttons as well as the 1, 2, 3, 4, 5 and 6 buttons have double functions dependent
on the push and hold time.
When the A and B buttons are pushed and held for more than one second Input Channels A or B
are either muted or unmuted. The red LED will illuminate when the Channel is muted. When the
“MUTE” LED is OFF, then the related Input Channel is UN-MUTED.
A momentary push of the A and B buttons enters the Editing Mode for the Input Channels (see
later for the Input Channel Editing details).
The blue “EDIT” LED will now be ON.
When the 1, 2, 3, 4 , 5 and 6 buttons are pushed and held for more than one second the Output
Channels 1, 2, 3, 4 , 5 and 6 are either muted or unmuted. The red LED will illuminate when the
Channel is muted. When the “MUTE” LED is OFF, then the related Output Channel is UN-MUTED.
A momentary push of the 1, 2, 3, 4 , 5 and 6 buttons enters the Editing Menu for the Output
Channels (see later for the Output Channel Editing details). The blue “EDIT” LED will now be ON.
• DLM26 Menu and Sub-Menu Structures
As stated above, the start-up default screen is the following factory preset:
From this point, sub-menus are accessed using the UTILITY”, “A/B”, “1/2/3/4/5/6”, “ENTER” and
“ESC” buttons and all parameters and values are navigated by the “NAV/Param.1”, “Param.2” and
“Param.3” encoders. Please refer to the following menu structures:
DLM26
2x3 WAY X-OVER

Specyfikacje produktu

Marka: FBT
Kategoria: nieskategoryzowany
Model: DLM 26

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z FBT DLM 26, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany FBT

FBT

FBT DLM 480 Instrukcja

8 Września 2024
FBT

FBT DLM 260 Instrukcja

8 Września 2024
FBT

FBT DLM 26 Instrukcja

8 Września 2024
FBT

FBT Horizon VHA-B 406 Instrukcja

8 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024