Instrukcja obsługi Extech PRC15

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech PRC15 (9 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/9
USER MANUAL
Current / Voltage Calibrator
Model PRC15
2 PRC15_en-US_V1.6 1/24
Introduction
Thank you for selecting the Extech Model PRC15. This device is shipped fully tested and calibrated
and, with proper use, will provide years of reliable service. Please visit the Extech Instruments
website (www.extech.com) to check for the latest version of this User Manual. Extech Instruments is
an ISO-9001 certified company.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present.
Double insulation.
Safety Notes
Do not exceed the maximum allowable input range.
Turn the unit OFF when the device is not in use.
Remove the batteries if the device is to be stored for longer than 60 days.
Never dispose of batteries in a fire. Batteries may explode or leak.
Never mix battery types. Always install new batteries of the same type.
Cautions
injury, Improper use of this meter can cause damage, shock, or death. Read and understand
this user manual before operating the meter.
Always remove the test leads before replacing the battery.
Inspect the condition of the test leads and the meter for any damage before operating the
meter. Repair or replace any damage before use.
provided If the equipment is used in a manner not specified by the manufacturer, the protection
by the equipment may be impaired.
3 PRC15_en-US_V1.6 1/24
Meter Description
1. AC adaptor input jack.
2. Display.
3. . Power ON/OFF
4. Source output adjustment arrow buttons.
5. Set button.
6. Unit button (mA or . %)
7. I/O MODE button.
8. MEM (memory STEP button).
9. Backlight/ZERO button.
10. Test lead input . jacks
Display Layout
1. SOURCE mode icon.
2. ZERO function status icon.
3. . MEASURE mode icon
4. Auto Power OFF active icon.
5. Battery status icon.
6. Measure mode value.
7. Measure mode unit icon.
8. Datalogger memory location.
9. Source mode value.
10. Source mode unit icon.

Specyfikacje produktu

Marka: Extech
Kategoria: Sprzęt pomiarowy
Model: PRC15

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech PRC15, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Sprzęt pomiarowy Extech

Extech

Extech PRC20 Instrukcja

8 Października 2024
Extech

Extech PRC30 Instrukcja

8 Października 2024
Extech

Extech SD900 Instrukcja

8 Października 2024
Extech

Extech PRC15 Instrukcja

8 Października 2024
Extech

Extech 412300A Instrukcja

8 Października 2024
Extech

Extech 412400 Instrukcja

8 Października 2024
Extech

Extech 433201A Instrukcja

8 Października 2024
Extech

Extech SD910 Instrukcja

8 Października 2024
Extech

Extech 407119 Instrukcja

4 Października 2024
Extech

Extech 42280A Instrukcja

3 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Stamos

Stamos S-LS-28 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-86 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-61 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-81 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-84 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-74 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-76 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-42 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-75 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-35 Instrukcja

15 Października 2024