Instrukcja obsługi Extech CG104


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech CG104 (10 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
USER MANUAL
Coating Thickness Tester
Model 1 CG 04
2 CG104- -US_V1.9 6/en 21
Introduction
Thank you for selecting the Extech Instruments 1 Coating Thickness Tester. T 1 is a CG 04 he CG 04
portable meter designed for non-invasive coating thickness measurements with automatic
recognition of the material under test.
The meter uses two measurement methods: magnetic induction (for ferrous metal substrates)
and eddy current (for non-ferrous metal substrates).
This device is shipped fully tested and calibrated and, with proper use, will provide years of
reliable service. Please visit our website (www.extech.com) to check for the latest version of this
User Guide, Product Updates, Product Registration, d Customer Support. an
Features
LED backlighting
Reversible LCD orientation
Auto Power OFF
Low-Battery Indication
Zero Function and Two-Point Calibration
Datalogging function
High-Low Alarm Alerts
Selectable Measurement Units
Supplied Zero and Standard Coating Substrates
Description
Meter Description
1. Ferrous/non-ferrous or auto (AT) indicator
2. Unit of measure
3. Measurement reading
4. MENU / Return button
5. Down arrow button
6. ZERO / CLEAR button
7. Backlight and Reverse Display arrow button
8. Escape / Delete button
9. Up Arrow button
10. Sensor
Note: Battery compartment on rear of meter
3 CG104- -US_V1.9 6/en 21
Function Keys
Access the Menu / Enter for confirming an edit
Reverse the display orientation/ press > 2 seconds for Backlight
Revert to previous mode / Delete an entry
Selecting functions, scrolling and setting values
Substrate Zero CAL (short press) / Calibration point clear (press > 2 secs.)
Function Key Notes:
ESC and Arrow keys are disabled in the Measurement mode
Backlight and ZERO buttons are disabled in the menu ‘Options’
Display Icon Description
Fe, N Ferrous and Non-ferrous substrates Fe
AT Auto metal sensing mode
▲▼ High-Low Alarm indicators
MEM MIN-MAX-AVG Recording is active
CAL Calibration is active
µm Micrometer unit of measure
mils mils (unit of measure) = millimeters * 2.54/100
MAX-MIN Maximum minus Minimum reading
MIN, MAX, AVG Minimum, Maximum, or Average reading
n Recalled data point storage serial number
Low battery


Specyfikacje produktu

Marka: Extech
Kategoria: Sprzęt pomiarowy
Model: CG104

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech CG104, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Sprzęt pomiarowy Extech

Extech

Extech 380941 Instrukcja

8 Stycznia 2025
Extech

Extech 380926 Instrukcja

8 Stycznia 2025
Extech

Extech PRC20 Instrukcja

8 Października 2024
Extech

Extech PRC30 Instrukcja

8 Października 2024
Extech

Extech SD900 Instrukcja

8 Października 2024
Extech

Extech PRC15 Instrukcja

8 Października 2024
Extech

Extech 412300A Instrukcja

8 Października 2024
Extech

Extech 412400 Instrukcja

8 Października 2024
Extech

Extech 433201A Instrukcja

8 Października 2024
Extech

Extech SD910 Instrukcja

8 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy