Instrukcja obsługi Extech AN340

Extech miary AN340

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech AN340 (16 stron) w kategorii miary. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
USER MANUAL
Mini-Vane CMM/CFM
Anemometer/Psychrometer + Datalogger
Model AN340
Additional User Manual Translations available at
www.extech.com
2 AN340- -US_ 6 9/ en V1. 22
Introduction
Thank you for selecting the Extech 4 CMM/CFM Anemometer Psychrometer Datalogger. This AN3 0
instrument measures Air Velocity, Air Flow (volume), Air Temperature Relative Humidity, Wet Bulb ,
Temperature, and Dew Point Temperature.
The mete compact mini impeller is perfect for duct airflow measurements. The sensor probe has r’s
an 18mm (0.7”) diameter and a 1M (39”) telescoping probe wand with a marked scale. Duct
temperature does not affect the airflow measurement results. Temperature and humidity sensors
are built into the vane sensor.
The user can manually store and recall 99 readings LCD The user can also directly on the meter’s .
automatically log up to 12,000 readings with date and time stamp and selectable sampling rate.
Readings are transferred to a PC using the available PC software and USB connector cable.
This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable
service. Please visit our website (www.extech.com) to check for the latest version of this User
Guide, Product Updates, and Customer Support.
CAUTIONS
Improper use of this meter can cause damage to the meter and personal injury. Read and
understand this user manual before operating the meter.
Inspect the condition of the probe and the meter for any damage before operating the
meter. Repair or replace damage before use.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impair ed.
This device should not be made available to children. It contains hazardous objects as well
as small parts that can be accidentally swallowed. The meter’s batteries and packing
materials can also be dangerous to children.
In the event that the meter is to be unused for an extended period of time, remove the
batteries to protect against battery leakage.
Expired or damaged batteries can be hazardous if allowed to come in contact with skin. Use
suitable hand protection in such cases.
Do not short circuit batteries or put batteries in fire.
3 AN340- -US_ 6 9/ en V1. 22
Description
Meter and Sensor Description
1. Sensor connection to the meter
2. Main LCD display digits
3. Lower line LCD display digits
4. MODE button
5. AVG-MAX-MIN and ENTER button
6. POWER ON-OFF and SET button
7. HOLD and up arrow button
8. MEM and RECALL button
9. START and ESC button
10. LW-D-A and down arrow button
11. Mini-Vane impeller
12. Temperature and humidity sensors
13. Telescoping sensor arm
Note: Battery compartment (not shown) is located on rear of instrument
Meter Top Description
1. Sensor connection jack
2. AC power adaptor jack
3. USB PC interface jack
Keypad Description
POWER ON-OFF and SET button
Press momentarily to power meter ON or OFF. Press and hold for two (2) seconds to enter the SETUP mode.


Specyfikacje produktu

Marka: Extech
Kategoria: miary
Model: AN340

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech AN340, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje miary Extech

Instrukcje miary

Najnowsze instrukcje dla miary

Tektronix

Tektronix TBS2204B Instrukcja

26 Września 2024
Testo

Testo 317-2 Instrukcja

24 Września 2024
Testo

Testo 883 Instrukcja

24 Września 2024
Testo

Testo 206 Instrukcja

24 Września 2024
Testo

Testo 521 Instrukcja

24 Września 2024
Testo

Testo Saveris 2 Instrukcja

24 Września 2024
Intellinet

Intellinet 780094 Instrukcja

16 Września 2024
Flir

Flir TA74 Instrukcja

14 Września 2024
Flir

Flir VT8-600 Instrukcja

14 Września 2024