Instrukcja obsługi Extech 42275

Extech Sprzęt pomiarowy 42275

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech 42275 (22 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/22
SW276
User Guide
Model 42265 Temperature Datalogger Kit
Model 42275 Temperature and Humidity Datalogger Kit
Model SW276 Datalogging Software
V7.1 1/08
2
Introduction
Congratulations on your purchase of Extech Instrument’s Datalogging instrumentation and
software. This User Guide serves three purposes, refer to the list below:
1. This User Guide covers the following products entirely with regard to hardware and
software operation:
Model 42275: Temperature and Humidity Datalogging Module with docking station and SW276 Windows
TM
Software
Model 42265: Temperature Datalogging Module with docking station & SW276 Windows
TM Software
Model SW276: WindowsTM Datalogging Software
2. This User Guide covers the following products with regard to software and some
hardware operation. A separate manual is supplied with your instrument that covers all
of the hardware operation.
Model 42276: Temperature & Humidity Datalogging Module plus printing/docking station & Optional
SW276 WindowsTM Software
Model 42266: Temperature-only Datalogging Module plus printing/docking station & Optional SW276
WindowsTM Software
Model 42270: Temperature and Humidity Datalogging Module
Model 42260: Temperature-only Datalogging Module
3. This User Guide covers the following products with regard to software only; all other
information regarding hardware is covered in a separate, dedicated manual supplied
with the instrument.
Model 42280: Temperature and Humidity Datalogger (Software instructions only)
Applications
The Datalogging modules models 42270 and 42260 can be used to monitor the
temperature of greenhouses, warehouses, food transports, aircraft cabins, refrigerated
trucks, containers, museums, and HVAC equipment. The Model 42270 records Relative
Humidity readings in addition to temperature readings. Modules can store 16,000 (8000
temperature and 8000 %RH for 42270) readings that can later be transferred to PC or
directly printed using the Model 42276 Programmer/Printer.
Important note on the Model 42280 Temperature/Humidity Datalogger
Note that the Model 42280 has its own User Guide. Please refer to
the separate User Guide supplied with the Model 42280 for details
on the meter’s operation. This manual covers only the Datalogging
software with regard to the 42280. Install the supplied Software as
described on the program CD’s label and then skip to page 5 of this
manual for software instructions.
Model 42280
The datalogger module display will not switch
on until activated through the software
The datalogger module display will not switch on until it is activated by the
software in the LOGGER SET menu as described later in this manual. In
LOGGER SET the user selects the type of recording activation. When the
lo
gg
er be
g
ins to lo
g
data
,
the dis
p
la
y
and status LEDs will switch on.
V7.1 1/08
3
REC HI LOW COMM
RH%
°C
°F
Description
1. LCD display
2. Mounting hole
3. Docking station
4. Interface Cable
5. Status LEDs
6. Software CD
Displays
LCD Display
REC: Displayed while logging readings. Read the ‘Recording
Status’ section for further details.
HI and LOW: Displayed when the High or Low Alarm limit is
exceeded. See ‘Alarm Status’ below for further information.
RH%: Relative Humidity (42270 and 42275 only)
C or F: Temperature units.
COMM: Appears when Datalogger is communicating with a PC.
Recording Status Indication
Both the RED status LED and the display indicator ‘REC’ will flash every 5 seconds if the
sampling rate is set to 5 seconds or higher. If the sampling rate is set lower than 5
seconds, the indicators will flash every 1, 2, 3, or 4 seconds as programmed.
ALARM Status Indication
Both the YELLOW status LED and the display indicator ‘ALM’ will flash when the recorded
value is higher than the user programmed High Alarm value or lower than the Low Alarm
value. The Alarm status LED and the ‘ALM’ display indicator flash every 5 seconds if the
sampling rate is programmed for 5 seconds or higher. If the sampling rate is set lower than
5 seconds, the indicators will flash every 1, 2, 3, or 4 seconds as programmed.
Low Battery Indication
When the lithium battery’s voltage nears the critical operating level the LCD displays ‘LO’.
To replace the battery, refer to the Battery Replacement section of this manual.

Specyfikacje produktu

Marka: Extech
Kategoria: Sprzęt pomiarowy
Model: 42275

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech 42275, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Extech

Extech

Extech 380941 Instrukcja

8 Stycznia 2025
Extech

Extech 380926 Instrukcja

8 Stycznia 2025
Extech

Extech PRC20 Instrukcja

8 Października 2024
Extech

Extech PRC30 Instrukcja

8 Października 2024
Extech

Extech SD900 Instrukcja

8 Października 2024
Extech

Extech PRC15 Instrukcja

8 Października 2024
Extech

Extech 412300A Instrukcja

8 Października 2024
Extech

Extech 412400 Instrukcja

8 Października 2024
Extech

Extech 433201A Instrukcja

8 Października 2024
Extech

Extech SD910 Instrukcja

8 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

PCE Instruments

PCE Instruments PCE-PMI 1 Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-324 Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-TC 32N Instrukcja

14 Stycznia 2025
PCE Instruments

PCE Instruments PCE-ACO 9500 Instrukcja

14 Stycznia 2025
Klein Tools

Klein Tools CL810 Instrukcja

14 Stycznia 2025
Klein Tools

Klein Tools CL710 Instrukcja

14 Stycznia 2025
Ebro

Ebro PHT 830 Instrukcja

13 Stycznia 2025
Kern

Kern FL 1KG Instrukcja

10 Stycznia 2025
PeakTech

PeakTech 6193 Instrukcja

10 Stycznia 2025
PCE Instruments

PCE Instruments PCE-313A Instrukcja

10 Stycznia 2025