Instrukcja obsługi Extech 407860


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech 407860 (10 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
USER MANUAL
Heavy Duty Vibration Meter
Model 407860
Additional User Manual Translations available at www.extech.com
40786 en0- -GB_v3.0 2/17
2
Introduction
Congratulations on your purchase of the Extech 407860 Vibration Meter. Model 407860 The
measures vibration levels in industrial machinery. Misalignment, poor balancing, structural
compromises, and other factors can cause unwanted vibration increases. The Model 407860 has
a frequency sensitivity that meets ISO-2954 and oers Displacement, Velocity and Acceleration
features. This meter is shipped fully tested and calibrated and, with proper use, will provide years
of reliable service.
Meter Description
1. Probe connector
2. RS-232 Connector
3. LCD Display
4. Function switches and pushbuttons
5. Probe
6. Magnetic base
7. Protective rubber meter jacket
8. Battery compartment (on rear)
Meter LCD Display
40786 en0- -GB_v3.0 2/17
3
Meter Operation
Connecting the Probe
1. Note that this meter accepts only the supplied vibration probe.
2. Plug the BNC connector end of the probe cable onto the BNC connector at the top of the meter.
3. The probe can then be connected to the tested machinery in three ways.
a. Attach the magnetic end of the probe to a on the equipment under test as ferrous material
shown in the accompanying diagram.
b. Manually hold the probe in place against the equipment under test as shown.
c. Unscrew the magnet from the probe end (as shown in the diagram) and use the threaded
mount to connect to a screw, bolt, or stud on the equipment under test.
POWER button and Auto Power OFF feature
1. Press the button to turn the meter ON. If the meter does not turn on, check the 9V POWER
battery.
2. To turn the meter o, press and hold the button until the meter beeps. POWER
3. The meter is equipped with an Automatic Power OFF utility that conserves battery life. If the
meter is left inactive for 10 minutes, omatically turn o. it will aut
Note: utility is disabled in the RECORD mode. Automatic Power OFF
FUNCTION button
Press the button to select RMS, PEAK or MAX-HOLD. FUNCTION
1. - Typical selection for vibration measurements RMS
2. – For measurement of the peak value. Not available in the Displacement mode. PEAK
3. MAX_HOLD – Holds and displays the maximum value. The display will update only when a
new maximum is measured. Not available in the Displacement mode.


Specyfikacje produktu

Marka: Extech
Kategoria: Sprzęt pomiarowy
Model: 407860

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech 407860, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Sprzęt pomiarowy Extech

Extech

Extech 380941 Instrukcja

8 Stycznia 2025
Extech

Extech 380926 Instrukcja

8 Stycznia 2025
Extech

Extech PRC20 Instrukcja

8 Października 2024
Extech

Extech PRC30 Instrukcja

8 Października 2024
Extech

Extech SD900 Instrukcja

8 Października 2024
Extech

Extech PRC15 Instrukcja

8 Października 2024
Extech

Extech 412300A Instrukcja

8 Października 2024
Extech

Extech 412400 Instrukcja

8 Października 2024
Extech

Extech 433201A Instrukcja

8 Października 2024
Extech

Extech SD910 Instrukcja

8 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy