Instrukcja obsługi Extech 375475

Extech przełącznik 375475

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech 375475 (4 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
User's Guide
7-Day Programmable Digital Timer
Model 375475
Introduction
Congratulations on your purchase of the Extech 375475 Digital Timer. This device
features individual or multi-day timer settings (up to 6 On/Off settings per day), easy-to-
read LCD, and battery-backup for the real-time clock. Careful use of this timer will
provide years of reliable service.
V1.1 3/04 2
AM
Mo
12:00
00
|ON
AM
WE
12:00
00
|ON
AM
TU
12:00
00
|ON
AM
US
12:00
00
|ON
AM
Mo T W T FU E H R
12:00
00
|ON
AM
S SA U
12:00
00
|ON
AM
Mo T W T F S SU E H R A U
12:00
00
|ON
Specifications
General Specifications
Input Line Voltage 120VAC (60Hz)
Switching Interval 1 minute minimum
Max Output Current 15A (resistive load); 8A (lighting load)
Max Resistive Load 1800W (15A x 120VAC)
Max Lighting Load 960W (8A x 120VAC)
Max Motor Load 1 Hp
Memory Backup One 1.5VDC Type N battery
Dimensions 4x2x2" (104x54x51mm)
Weight 5.25 oz. (150g)
Operation
Set the Real-Time Clock
1. Day Set: Hold down the CLOCK button and
press the WEEK button until the correct day
appears at the top of the display.
2. Time Set: Hold down the CLOCK button and press the HOUR button until the display
indicates the correct hour. You may have to cycle through the hours twice to obtain the
proper AM or PM (on the left side of the display).
3. Hold down the CLOCK button and press the MIN button until the display indicates the
correct minutes. Seconds will automatically reset to zero.
Set the Power ON/OFF Timers
1. Push the PROG button once. 1ON will appear near the lower left corner of the display to
indicate the the first power-on time is ready to be programmed.
2. Press the HOUR and
MIN buttons to enter
your first desired
power-on time.
3. Press the WEEK button to select
the desired day. These days appear
along the top of the display. If “Mo
Tu We Th Fr Sa Su” all appear on
the display, these days all have the
same power-on time. You can
select “Mo Tu We Th Fr” as a
group, “Sa Su” as a group, or a
single day.
AM
Mo T W T F S SU E H R A U
_ _ _ _
|ON
AM
Mo T W T F S SU E H R A U
12:0000
|ON
AM Mo
12:0000
V1.1 3/04 3
4. When you have your first desired power-on time and date entered, press the PROG
button. 1
OFF
now appears on the display to indicate that the first power-off time is ready
to be programmed. Repeat steps 2 and 3 to enter your first desired power-off time.
5. Press the PROG button again. 2
ON appears on the display to indicate that the second
power-on time is ready to be programmed. Repeat the same procedure used in steps 2
through 4 to enter the rest of your power-on/power-off times (up to 6 on/off times
maximum).
6. Press the PROG button to step through the times you entered to make sure they are
correct.
7. Press the RST/RCL button to reset or recall any timer entries. When you reset a
particular power-on/off entry, four dashes will appear instead of time. When you recall
an entry, it will return the values that were set before you performed a reset.
8. Press the CLOCK button to return to the real time clock display.
9. Press the ON/AUTO/OFF button until the bar below the display is positioned above the
OFF legend on the face of the timer.
Connecting an Appliance to the Timer
1. Plug the Digital Timer into a standard AC outlet. If the power indicator light is on, press
ON/AUTO/OFF button once or twice until the light goes out. NOTE: The bar below the
display should be above the “OFF” legend.
2. Plug the appliance cord you wish to control into the socket on the Digital Timer. Make
sure any power switch on the appliance is set to on. (The appliance will not turn on
because the Digital Timer is set to off).
3. To manually turn the appliance on, press the ON/AUTO/OFF button until the power
indicator lights and the bar below the display is above the “ON” legend on the timer’s
faceplate.
4. To automatically control the appliance, press the ON/AUTO/OFF button until the bar
below the display is above the “AUTO” legend on the faceplate.
Mo T W T F S S
U E H R A U
_ _ _ _
|OFF
Mo T W T F S S
U E H R A U
|OFF 12:00
00
Mo T W T F S S
U E H R A U
_ _ _ _
2ON
Mo T W T F S S
U E H R A U
_ _ _ _
2OFF
AM
M T W T F S S
O U E H R A U
________

Specyfikacje produktu

Marka: Extech
Kategoria: przełącznik
Model: 375475

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech 375475, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik Extech

Extech

Extech 375475 Instrukcja

16 Sierpnia 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

LevelOne

LevelOne IFP-0801 Instrukcja

9 Stycznia 2025
LevelOne

LevelOne IES-0620 Instrukcja

9 Stycznia 2025
LevelOne

LevelOne IGS-2105P Instrukcja

9 Stycznia 2025
Homematic IP

Homematic IP HMIP-PSM-CH Instrukcja

8 Stycznia 2025
Advantech

Advantech EKI-2711PSI Instrukcja

8 Stycznia 2025
Sonance

Sonance SS4 Instrukcja

8 Stycznia 2025
Smart-AVI

Smart-AVI SM-MST-2D Instrukcja

7 Stycznia 2025
Smart-AVI

Smart-AVI SM-DVN-84X Instrukcja

7 Stycznia 2025
D-Link

D-Link DGS-1100-08 Instrukcja

6 Stycznia 2025
Extron

Extron DTP3 CrossPoint 642 Instrukcja

6 Stycznia 2025