Instrukcja obsługi EtiamPro ECAMTVI101B

EtiamPro Kamera monitorująca ECAMTVI101B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EtiamPro ECAMTVI101B (11 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
Bullet & Turret Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual may contain several technical incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
Regulatory Information
FCC Information
Please take attention that changes or modification not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
FCC compliance: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
EU Conformity Statement
This product and if applicable the - -
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Directive
20 /35/EU, the EMC Directive 201 30/EU, the RoHS 14 4/
Directive 2011/65/EU.
20 2/1 19/EU (WEEE directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentation for
specific battery information. The battery is
marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For
more information see: www.recyclethis.info.
Industry Canada ICES 003 Compliance-
This device meets the CAN ICES 3 (A)/NMB- -3(A)
standards requirements.
Warning
This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instruction
These instructions are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precaution measure is divided into “Warnings” and
“Cautions”.
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cautions: Injury or equipment damage may occur if any
of the cautions are neglected.
Warnings
⚫ In the use of the device, you must be in strict
compliance with the electrical safety regulations of
the nation and region.
⚫ Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950 1 standard. Refer to -
technical specifications for detailed information.
⚫ Do not connect multiple devices to one power
adapter to avoid over heating or a fire hazard caused -
by overload.
⚫ Make sure that the plug is firmly connected to the
power socket.
⚫ Make sure that the device is firmly fixed if wall
mounting or ceiling mounting is adopted.
⚫ If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cord, and
then contact the service center.
⚫ Never attempt to disassemble the camera by
unprofessional personal.
Cautions
⚫ Do not drop the camera or subject it to physical
shock.
⚫ Do not touch senor modules with fingers.
⚫ Do not place the camera in extremely hot, cold (the
operating temperature shall be °C to 60°C), dusty -40
or damp locations, and do not expose it to high
electromagnetic radiation.
⚫ If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
⚫ Do not aim the camera at the sun or extra bright
places.
⚫ The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
⚫ Do not expose the device to high electromagnetic
radiation or extremely hot, cold, dusty or damp
environment.
⚫ To avoid heat accumulation, good ventilation is
required for the operating environment.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.

Specyfikacje produktu

Marka: EtiamPro
Kategoria: Kamera monitorująca
Model: ECAMTVI101B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EtiamPro ECAMTVI101B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca EtiamPro

EtiamPro

EtiamPro ECAMIP601B Instrukcja

22 Września 2024
EtiamPro

EtiamPro CCTVPROM20 Instrukcja

21 Września 2024
EtiamPro

EtiamPro ECAMIP101B Instrukcja

21 Września 2024
EtiamPro

EtiamPro ECAMIP801 Instrukcja

20 Września 2024
EtiamPro

EtiamPro ECAMIP102 Instrukcja

20 Września 2024
EtiamPro

EtiamPro ECAMTVI501B Instrukcja

20 Września 2024
EtiamPro

EtiamPro CCTVPROM21W Instrukcja

20 Września 2024
EtiamPro

EtiamPro ECAMIP101 Instrukcja

20 Września 2024
EtiamPro

EtiamPro ECAMIP701 Instrukcja

20 Września 2024
EtiamPro

EtiamPro CCTVPROM23W Instrukcja

20 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs

Trebs CCD-401C Instrukcja

15 Października 2024
Hikvision

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024
D-Link

D-Link DCS-7510 Instrukcja

15 Października 2024
Ubiquiti Networks

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024
Hikvision

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024
Alecto

Alecto DVC-215IP Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024