Instrukcja obsługi Etekcity EL19


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Etekcity EL19 (2 stron) w kategorii Libra. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Questions or Concerns?
support@etekcity.com • (855) 686-3835
Digital Luggage Scale
Model: EL19
User Manual
Care & Maintenance
Replacing the Batteries
Do not immerse the scale in water
or use chemical detergents to clean
the scale.
Use a damp cloth to wipe the scale
clean.
Do not place stress on the triangle
ring when not using the scale.
1. Turn the scale over and open the
battery compartment.
2. Remove the used battery and replace
it with 1 new 3V CR2032 battery.
Make sure the + side of the battery is
facing up.
3. Replace the battery compartment
cover.
When the display reads “ ”, battery
power is low. Replace the battery.
Warranty Information
Product Digital Luggage Scale
Model EL19
Default
Warranty Period
2 years
For your own reference, we strongly
recommend that you record your order ID and
date of purchase.
Order ID
Date of Purchase
TERMS & POLICY
Etekcity Corporation (“Etekcity”) warrants this
product to the original purchaser to be free from
defects in material and workmanship, under
normal use and conditions, for a period of 2 years
from the date of original purchase.
Etekcity agrees, at our option during the
warranty period, to repair any defect in material
or workmanship or furnish an equal product in
exchange without charge, subject to verication
of the defect or malfunction and proof of the date
of purchase.
There is no other express warranty. This warranty
does not apply:
If the product has been modied from its
original condition;
If the product has not been used in
accordance with directions and instructions in
the user manual;
To damages or defects caused by accident,
abuse, misuse or improper or inadequate
maintenance;
To damages or defects caused by service
or repair of the product performed by an
unauthorized service provider or by anyone
other than Etekcity;
To damages or defects occurring during
commercial use, rental use, or any use for
Customer Support
If you have any questions or concerns
about your new product, please contact
our helpful Customer Support Team.
*Please have your order invoice and order ID
ready before contacting Customer Support.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
SUPPORT HOURS
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Email: support@etekcity.com
Toll-Free: (855) 686-3835
01.02_D_21I03_us
which the product is not intended;
To damages or defects exceeding the cost of
the product.
Etekcity will not be liable for indirect, incidental,
or consequential damages in connection with the
use of the product covered by this warranty.
This warranty extends only to the original
consumer purchaser of the product and is not
transferable to any subsequent owner of the
product regardless of whether the product is
transferred during the specied term of the
warranty.
This warranty does not extend to products
purchased from unauthorized sellers. Etekcity’s
warranty extends only to products purchased from
authorized sellers that are subject to Etekcity’s
quality controls and have agreed to follow its
quality controls.
All implied warranties are limited to the period of
this limited warranty.
This warranty gives you specic legal rights
and you may also have other rights which vary
from state to state. Some states do not allow
the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you.
If you discover that your product is defective
within the specied warranty period, please
contact Customer Support via support@etekcity.
com. DO NOT dispose of your product before
contacting us. Once our Customer Support Team
has approved your request, please return the
product with a copy of the invoice and order ID.
Every Etekcity product automatically includes a
2-year warranty. To make the customer support
process quick and easy, register your product
online at www.etekcity.com/warranty.
This warranty is made by:
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Package Contents
Specications
1 x Digital Luggage Scale
1 x 3V CR2032 Battery (Pre-Installed)
1 x User Manual
Weight Capacity 110 lb / 50 kg
Units oz / kg / g / lb
Graduation 0.35 oz / 10 g
Battery 1 x 3V CR2032
Battery (Lithium)
Dimensions 5.7 x 1.4 x 1.2 in /
145 x 35 x 30 mm
Auto-Off 60 seconds
Important Safety Information
SAVE THESE
INSTRUCTIONS
Follow all instructions and safety
guidelines. Read all instructions
before using.
Do not exceed 110 lb / 50 kg, including
the tared weight of the container. The
display will read “ ” if the weight
exceeds the limit.
This scale is not intended for commercial
or heavy-duty use. Household use only.
Do not throw or strike the scale and do
not submerge the scale in water.
Function Diagram
A. Display
B. Power Button
C. Scale Body
D. Battery Compartment
E. Triangle Ring
F. Belt
G. Hook
Before First Use
1. Open the battery cover. If necessary,
use a tool to open.
2. Remove the insulation strip from the
battery. [Figure 1.1]
3. When replacing the battery, make
sure the + side of the battery is
facing up. [ ]Figure 1.2
4. Replace the battery cover.
Figure 1.1
Figure 1.2
General Operation
Weight Measurement
Data Hold Function
1. Press to turn on the scale. Wait
for “ ” to appear on the display.
Note: Do not move the scale during
measurement.
4. To measure another item, remove the
luggage and repeat steps 2 and 3.
5. Press and hold for 3 seconds to
turn the scale off.
2. Wrap the belt around the handle of
your luggage and place the hook on
the bottom of the triangle ring.
3. Lift the luggage with the scale
and hold still until the weight
measurement stabilizes. The display
will show the weight and “ ” (Data H
Hold).
Once the weight has stabilized and “ H
appears on the display, the weight will
stay on the screen for 60 seconds, or until
you measure another object. You can also
press to reset the display.
1. Press to turn on the scale. Make
sure the display reads “ ”.
2. Wrap the belt around the handle of
the container and place the hook
on the bottom of the triangle ring.
Allow the weight to stabilize until “ H
appears on the display.
3. Hold the scale stable and press
to tare. The display will show .T
4. Place the item you want to weigh
inside the container. The scale
will measure the contents without
including the weight of the container.
Unit Conversion
Tare Function
1. Press to turn the scale on.
2. Before the display reads “ ”, press
repeatedly to switch between
grams (g), pounds (lb), ounces (oz),
and kilograms (kg).
You can use the Tare function to weigh an
object inside a container by subtracting
the weight of the container from the total
weight.


Specyfikacje produktu

Marka: Etekcity
Kategoria: Libra
Model: EL19

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Etekcity EL19, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Libra Etekcity

Etekcity

Etekcity ESB4074C Instrukcja

23 Września 2024
Etekcity

Etekcity EB4473C Instrukcja

22 Września 2024
Etekcity

Etekcity EB4887S Instrukcja

20 Września 2024
Etekcity

Etekcity EB4410B Instrukcja

20 Września 2024
Etekcity

Etekcity ESF00+ Instrukcja

19 Września 2024
Etekcity

Etekcity EL11 Instrukcja

19 Września 2024
Etekcity

Etekcity EB9388H Instrukcja

18 Września 2024
Etekcity

Etekcity ESB-591 Instrukcja

18 Września 2024
Etekcity

Etekcity ESF14 Instrukcja

18 Września 2024

Instrukcje Libra

Najnowsze instrukcje dla Libra

Adler

Adler AD 8183 Instrukcja

15 Października 2024
Adler

Adler AD 8182 Instrukcja

15 Października 2024
Camry

Camry EF933 Instrukcja

10 Października 2024
Withings

Withings Body Scan Instrukcja

9 Października 2024
Gallet

Gallet PEP712 Instrukcja

9 Października 2024
Orbegozo

Orbegozo PB 2236 Instrukcja

9 Października 2024
Mebby

Mebby Primi Pesi Instrukcja

9 Października 2024