Instrukcja obsługi ESQ Aston Chronograph

ESQ Oglądać Aston Chronograph

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ESQ Aston Chronograph (2 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Operating Instructions
ASTON 1/5 CHRONOGRAPH
A chronograph combines two time-keeping functions. It incorporates
a device to measure intervals of time independent of the regular time
shown on the dial. Your ESQ by Movado Aston Chronograph may be
used to time events up to two hours in duration, in 1/5 of-a-second
increments.
NOTE: After 2 hours of continuous running, the chronograph will stop
and reset automatically to preserve battery life.
Setting the Time:
1. Pull crown out to position 3. (Watch will stop.)
2. Turn crown in either direction to move hands to desired time.
Be sure to take AM/PM into account so that date changes at midnight,
not noon.
3. Push crown back in to position 1. (Watch will restart.)
NOTE: To set time to exact second, pull crown out to position 2 precisely
when small seconds hand S reaches <<60>> position. (Watch stops.)
Adjust time to one minute ahead, and take an accurate time signal, from
a radio news station, for example. When audible tone signals exact time,
immediately push crown back in to position 1. (Watch will restart, now
set to the exact time.)
Setting the Day:
1. Pull crown out to position 3. (Watch will stop.)
2. Turn crown in either direction to move hands forward or back. Each
time the hands complete a 24-hour revolution and pass midnight,
Day indicator hand F will move ahead or back by one day.
3. Once correct Day has been reached, set hands to correct Time,
following instructions above.
4. Push crown back in to position 1. (Watch will restart.)
Setting the Date:
1. Pull crown out to position 2. (Watch will keep running.)
2. Turn crown clockwise to move hands forward. Each time the hands
complete a 24-hour revolution and pass midnight, the date shown in
Date display D will advance by one number.
3. Once correct Date has been reached, push crown back in to position 1.
CAUTION: Never set the date when the hands are between 9:00 PM
and 12:30 AM, while automatic date changing is in progress. Doing so
could damage the calendar mechanism.
Chronograph Function Overview
Use buttons A and B to operate the chronograph. Pressing button A
the first time will start the chronograph. While the chronograph is run-
ning, once the chronograph fifths-of-a-second counter hand C has com-
pleted one turn, minute-counter hand E will jump ahead one minute.
Pressing button A a second time will stop the chronograph. Pressing
button B will reset chronograph hands E and C to zero. Adjusting the
time does not stop the chronograph, but it does block buttons A and B
for as long as the crown is pulled out.
IMPORTANT: Crown must be in position 1 and hands must be at zero
before chronograph is started. Press button B to reset hands to zero.
Do not push button A or B while crown is pulled to position 2 or 3.
If button A or B is accidentally activated while crown is not flush against
case, one or both chronograph hands may become de-synchronized.
Should this occur, see directions for synchronizing hands at end of
following instructions.
Simple chronograph functions:
To measure the duration of a single, non-stop event:
1. Press button A to start chronograph.
2. Press button A a second time to stop chronograph, and read the 2
chronograph hands to determine elapsed time, for example: 14 minutes;
37 and 3/5 of a second.
3. Press button B to reset chronograph to zero.
Accumulated time functions:
To measure the combined time of a series of shorter events, for example
the actual playing time of a football game, where play is repeatedly
interrupted:
1. Press button A to start chronograph.
2. Press button A a second time to stop chronograph.
3. Press button A again to resume measurement.
4. Press button A a fourth time to stop chronograph again.
NOTE: Each time you stop chronograph, chronograph hands will indicate
total accumulated time.
Repeat steps 1 and 2 to add each additional interval of time.
5. After you have taken your final accumulated time reading, press button
B to reset chronograph hands to zero.
Split-time or intermediate time functions:
To take intermediate time readings as a race progresses:
1. Press button A to start chronograph.
2. Press button B to momentarily stop chronograph.
3. Read off the intermediate time, for example:10 minutes, 26 and 2/5
of a second.
Legend
H - Hour hand
M - Minute hand
S - Small seconds hand
F - Day indicator hand
C - Center-mounted chronograph fifths-of-a-second hand
E - Chronograph 30-minutes counter
D - Date display
1, 2, 3 - Crown positions
A - Chronograph start/stop push-button
B - Chronograph split/reset push-button
20
28
30
S
S
F
T
T
M
W
10 40
0
20
E
1
A
B
C
D
F
2
S
HM
3
4. Press button B to resume chronograph function. Hands will catch up
with ongoing event.
5. To read a second split time, press button B again.
Repeat steps 2 through 4 to take any additional split times.
6. Press button A to stop chronograph.
7. Take a reading of the final time, for example: 27 minutes, 3 and 4/5
of a second.
8. Press button B to reset chronograph hands to zero.
To Synchronize Chronograph Hands:
After a battery change or in the event of an error, you may need
to manually adjust one or more chronograph hand to align them all
correctly at their zero positions.
1. Pull crown out to position 2.
2. Use push-button B to adjust chronograph 30-minutes counter hand E;
press and hold button to advance hand rapidly.
3. Use push-button A to adjust center-mounted chronograph fifths-of-a-
second hand C; press and hold button to advance hand rapidly.
4. When both chronograph hands are aligned at 12 o’clock, push crown
back in to position 1.
Timing hands are now synchronized at zero position, and chronograph is
ready for use.

Specyfikacje produktu

Marka: ESQ
Kategoria: Oglądać
Model: Aston Chronograph

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ESQ Aston Chronograph, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Oglądać ESQ

ESQ

ESQ Pipeline with Tide Movement Instrukcja

17 Września 2024
ESQ

ESQ Beacon Chronograph Instrukcja

13 Września 2024
ESQ

ESQ Aston Chronograph Instrukcja

11 Września 2024
ESQ

ESQ Quest Retrograde Instrukcja

11 Września 2024
ESQ

ESQ Analog - Digital Chronograph Instrukcja

10 Września 2024
ESQ

ESQ Analog Chronograph with Alarm Instrukcja

10 Września 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024
Rolex

Rolex Submariner Instrukcja

9 Października 2024
Casio

Casio GW-3000BD-1AER Instrukcja

9 Października 2024
Seiko

Seiko 6N76 Instrukcja

8 Października 2024
Seiko

Seiko 6N53 Instrukcja

8 Października 2024
Seiko

Seiko 6N52 Instrukcja

8 Października 2024
Seiko

Seiko 6G28 Instrukcja

8 Października 2024
Seiko

Seiko 4N30 Instrukcja

8 Października 2024
Seiko

Seiko 4227 Instrukcja

8 Października 2024
Seiko

Seiko 6N32 Instrukcja

8 Października 2024