Instrukcja obsługi ESI Neva Uno


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ESI Neva Uno (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Quick Start Guide
24-bit / 192 kHz USB-C Audio Interface
with Microphone Preamp
Introduction
Congratulations on your purchase of Nev
Nev
Nev
NevNeva
a
a
a a Uno
Uno
Uno
UnoUno, a high
quality USB-C audio interface to connect a microphone,
synthesizer or guitar and to listen with headphones or
studio monitors in 24-bit / 192 kHz audio quality. Neva
Neva
Neva
Neva Neva
Uno
Uno
Uno
UnoUno works with Mac, PC and as a fully class compliant
device even with many portable devices such as iPad and
iPhone (via an adapter like the Camera Connection Kit).
Getting Started
To start using Nev
Nev
Nev
NevNeva
a
a
a a Uno,
Uno,
Uno,
Uno, Uno, connect it to your computer
using the included USB cable. The ESI logo LED will
light up in orange color to show that the audio interface
is ready to use. It is a good time now to either connect
headphones to the headphone connector on the front or
using the RCA outputs on the back to connect the
interface to studio monitor speakers. You will not be able
to listen to any audio signals otherwise.
On the Mac, Nev
Nev
Nev
NevNeva Uno
a Uno
a Uno
a Uno a Uno does not require any drivers to be
used (plug-and-play), however you can download a
control panel application on our website. On iPhone or
iPad, most audio apps will automatically use the
interface after it has been connected. For Windows users,
we provide a driver optimized for professional audio
applications (incl. ASIO support) that is available for
download - . Also the driver provides http://en.esi.ms/118
Dir
Dir
Dir
DirDirec
ec
ec
ecectWI
tWI
tWI
tWItWIRE
RE
RE
RERE, virtual audio ch
functionality. This makes it poss
internal audio signals from vario
More details about DirectWIRE
DirectWIRE
DirectWIRE
DirectWIREDirectWIRE
found on our website in the exte
under kb.esi-audio.com.
Microphone Connection
To connect a microphone to Ne
Ne
Ne
NeNe
know if it is a dynamic or a conde
in the later case, 48V phantom po
corresponding switch needs to b
ESI logo LED then turns red). M
cable to connect it to the 'Line / M
Guitar Connection
To use Ne
Ne
Ne
NeNeva
va
va
va va Uno
Uno
Uno
Uno Uno with an electr
need to connect it with a TS gui
Hi-Z 2' input. The selection swit
set to 'Hi-Z'.
Input Monitoring
If you want to listen to the incom
can enable the so-called direct m
the 'Direct' monitoring switch
enabled, you listen to incoming
1 - +48V P hantom Power Switch to provide power for
a condenser microphone. When enabled, the power
LED illuminates red, when disabled orange.
2 - Line Hi- Z S witch for input 2 to switch between
Line level and Hi-Z guitar signals.
3 - Dir ect Moni tor i ng S wi tc h to enable or disable
input monitoring to listen to the input signals.
Connectors and Functions
4 - Gain K nob 1 to change the input gain /
for input 1. The LED ring indicates the si
green (= good), orange (= optimal), red (=
5 - Gain K nob 2 to change the input gain /
for input 2. The LED ring indicates the si
green (= good), orange (= optimal), red (=
6 - Volume K nob to change the main outp
for connected headphones and speakers.


Specyfikacje produktu

Marka: ESI
Kategoria: Niesklasyfikowane
Model: Neva Uno

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ESI Neva Uno, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane ESI

ESI

ESI MAYA22 USB Instrukcja

15 Września 2024
ESI

ESI UGM192 Instrukcja

28 Sierpnia 2024
ESI

ESI Neva Duo Instrukcja

26 Sierpnia 2024
ESI

ESI Neva Uno Instrukcja

25 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane