Instrukcja obsługi Escea DS1900


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Escea DS1900 (57 stron) w kategorii Podgrzewacz. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/57
Installation / Service Instructions
DS 1900
Gas Fireplace
630503_9
For the latest documentation, visit www.escea.com
Warning: Refer to the warning on page 1 and the wall lining instructions in
sections B5 on page 9 and F6 on page 42. Failure to follow these
instructions may result in a fire.
Important:
The appliance shall be installed in accordance with;
This installation instruction booklet
Local gas fitting regulations
Municipal building codes
Electrical wiring regulations
Any other relevant statutory regulations
AS/NZS 5601.1:2013 Gas Installations
WARNING:
This appliance must be installed by a qualified person. Replacement of the appliance mains supply
cord should only be made by the manufacturer, its service agent, or a similarly qualified person. This
appliance must be installed into a cavity strictly in accordance with the following instructions.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN
OPERATION.
DO NOT USE OR STORE FLAMMABLE MATERIALS IN OR NEAR THIS APPLIANCE.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT MODIFY THIS APPLIANCE.
This appliance is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the appliance.
Failure to follow these instructions could cause a malfunction of the heater, which could result in
death, serious bodily injury, and/or property damage. Failure to follow these instructions may also
void your fire insurance and/or warranty.
Who can install this product:
Installation must be carried out by a registered installer who, on completion of the installation, must
issue a:
AUS: Certificate of Compliance
NZ: Certificates that comply with the latest legislation in accordance with national and/or local
codes. If these are not issued then the Escea warranty may be void.
Warranty Repair and Annual Servicing:
Please contact Escea if you require warrant work. Warranty repair work must be carried out by a
recognised gas fire technician. It is recommended that recognised Escea Gas Fire Technicians are
also used to carry out annual servicing requirements (particularly during the warranty period). For
contact details of recognised Escea Gas Fire Technicians in your area, or for replacement parts,
please contact the retailer from whom the appliance was purchased our visit our website.
The heater must be installed according to these instructions and in compliance with all relevant:
building, gas fitting, electrical and other statutory regulations (eg. AS/NZS 5601). Any
shortcomings in the appliance and flue installation will be the responsibility of the installer, and
Escea will not be accountable for any such failings or their consequences.
Manufactured by: Escea Ltd, PO Box 5277 Dunedin NZ, Ph: +64 3 478 8220. For contact details
of your local Escea distributor or dealer in New Zealand, please visit: www.escea.com or
email: info@escea.com. From Australia, please visit www.escea.com.au, call AU: 1800 460 832 or
WA: 1800 730 140, or email us at info@escea.com
DS1900 PRODUCT SPECIFICATION
MODEL NAME DS1900
Description of Appliance Indoor Gas Fire Heater
Star Rating 3 Stars
Max. Heat Output 10.5 kW
A/NZ Approval No. AS/NZS 5263.1.3:2016
Gas Type Natural Propane ULPG
Gas input High 49 MJ/hr 47 MJ/hr 47 MJ/hr
Low 37 MJ/hr 34 MJ/hr 34 MJ/hr
Inlet Pressure Max 5 kPa 5 kPa 5 kPa
Min 1.13 kPa 2.75 kPa 2.75 kPa
Operating Pressure on High 0.82 kPa 1.79 kPa 1.79 kPa
Operating Pressure on Low 0.43 kPa 0.88 kPa 0.88 kPa
Burner Jet Size LH & RH: 1.95mm
Middle: 2.1mm
LH & RH: 1.1mm
Middle: 1.4mm
LH & RH: 1.1mm
Middle: 1.4mm
Burner Aeration LH & RH: Closed
Middle: Closed
LH & RH: 2 x 4mm
Middle: 2 x 12mm
LH & RH: 2 x 6mm
Middle: Spacer
Pilot injector #37 #27 #27
Appliance Dimensions (mm)
Width 2277mm
Height 866 mm
Depth 380 mm
Weight 160 kgKg
Ignition System Electronic Ignition to pilot system
Escea PCB
Ignition Activation 35 secs (approx)
Flame Safeguard Flame Rectification
Consumption 160W @ 0.69A 230V
Remote controls Yes
Timers Yes
Clock Yes
Function lock / child Yes
Temperature control Yes
Connections
Electric 240V AC
Gas 1/2" BSPP female lower centre of fireplace chassis
Flue Type Aluminium Flexi Flue, and PolyPro, and coaxial rigid duravent
Flue Size 75mm and 100mm Flexi Flue & PolyPro, 5” x 8” duravent
Spigot
Location Right hand top
Data badge location On Chassis Base


Specyfikacje produktu

Marka: Escea
Kategoria: Podgrzewacz
Model: DS1900

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Escea DS1900, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podgrzewacz Escea

Escea

Escea DF990 Instrukcja

17 Września 2024
Escea

Escea TFS650 Instrukcja

16 Września 2024
Escea

Escea DL850 Instrukcja

15 Września 2024
Escea

Escea TC950 Instrukcja

15 Września 2024
Escea

Escea DS1650 Instrukcja

14 Września 2024
Escea

Escea DS1900 Instrukcja

14 Września 2024
Escea

Escea DF960 Instrukcja

13 Września 2024
Escea

Escea EK1250 Instrukcja

13 Września 2024
Escea

Escea DFS730 Instrukcja

13 Września 2024
Escea

Escea EK950 Instrukcja

11 Września 2024

Instrukcje Podgrzewacz

Najnowsze instrukcje dla Podgrzewacz