Instrukcja obsługi Ernitec 0070-08215

Ernitec Kamera monitorująca 0070-08215

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ernitec 0070-08215 (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

2 2 Camera Dimensions.

Figure 2 2 - Dimensions (Unit: mm)

Special Announcement

, For more information please refer to website.

Fully understand this document before using this device,

and strictly observe rules in this document when using this

device. If you install this device in public places, provide the

tip "You have entered the area of electronic surveillance" in

an eye-catching place. Failure to correctly use electrical

products may cause fire and severe injuries.

ŸStrictly observe installation requirements when installing

the device. The manufacturer shall not be held responsible

for device damage caused by users' non-conformance to

these requirements.

ŸStrictly conform to local electrical safety standards and use

power adapters that are marked with the LPS standard

when installing and using this device. Otherwise, this

device may be damaged.

ŸUse accessories delivered with this device. The voltage

must meet input voltage requirements for this device.

ŸIf this device is installed in places with unsteady voltage,

ground this device to discharge high energy such as

electrical surges in order to prevent the power supply from

burning out.

ŸWhen this device is in use, ensure that no water or any

ŸAvoid heavy loads, intensive shakes, and soaking to

prevent damages during transportation and storage. The

warranty does not cover any device damage that is caused

during secondary packaging and transportation after the

original packaging is taken apart.

ŸProtect this device from fall-down and intensive strikes,

keep the device away from magnetic field interference, and

do not install the device in places with shaking surfaces or

under shocks.

ŸClean the device with a soft dry cloth. For stubborn dirt, dip

the cloth into slight neutral cleanser, gently wipe the dirt

with the cloth, and then dry the device.

ŸDo not jam the ventilation opening. Follow the installation

instructions provided in this document when installing the

device.

ŸKeep the device away from heat sources such as radiators,

electric heaters, or other heat equipment.

ŸKeep the device away from moist, dusty, extremely hot or

cold places, or places with strong electric radiation.

ŸIf the device is installed outdoors, take insect- and

moisture-proof measures to avoid circuit board corrosion

that can affect monitoring.

ŸRemove the power plug if the device is idle for a long time.

ŸBefore unpacking, check whether the fragile sticker is

damaged. If the fragile sticker is damaged, contact

customer services or sales personnel. The manufacturer

shall not be held responsible for any artificial damage of the

fragile sticker.

ŸAll complete products sold by the manufacturer are

delivered along with nameplates, quick setup guide and

accessories after strict inspection. The manufacturer shall

not be held responsible for counterfeit products.

ŸThe manufacturer will update this manual according to

product function enhancement or changes and regularly

update the software and hardware described in this manual.

Update information will be added to new versions of this

manual without prior notice.

ŸThis manual may contain misprints, technology information

that is not accurate enough, or product function and

operation description that is slightly inconsistent with the

actual product, the final interpretation of company is as a

standard.

ŸThis manual is only for reference and does not ensure that

the information is totally consistent with the actual product.

For consistency, see the actual product.

Precautions

Open the package, check the appearance of product for no

obvious damage, and confirm the item list for table 1-1 is

consistent.

Table 1 1- Packing list

2.1 Device Ports

Different devices may have different ports, multi-head cables,

and fill lights; Please refer to the actual product.

Different devices may have different dimensions; Please

refer to the actual product.

NOTE

liquid flows into the device. If water or liquid unexpectedly

flows into the device, immediately power off the device and

disconnect all cables (such as power cables and network

cables) from this device.

ŸDo not focus strong light (such as lighted bulbs or sunlight)

on this device. Otherwise, the service life of the image

sensor may be shortened.

ŸIf this device is installed in places where thunder and

lightning frequently occur, ground the device nearby to

discharge high energy such as thunder strikes in order to

prevent device damage.

It alerts you to moderate dangers which, if not

avoided, may cause minor or moderate injuries.

It alerts you to risks. Neglect of these risks may

cause device damage, data loss, device

performance deterioration, or unpredictable

results.

It provides additional information.

NOTE

CAUT IO N

WARNING

CAUTION

Device Structure

Open Package Examination

Bullet Network Camera

Quick Setup Guide

Accessory Package

Installation Location Sticker

Component Quantity Remark

Figure2 1- Multi-head cable

Table 2-1 Multi-head cable description

Figure 2 3 -Install SD card

Port

OUT

Connect to a standard Ethernet

cable or PoE. The green light is on,

the network connection is normal;

The yellow light flashes when the

data is transmitted. Some models

maybe not have the lights; Please

refer to the actual product.

Connect to an external audio

device such as a speaker.

Applied for

camera with

audio

function

Receive an analog audio signal

from devices such as a sound

pickup device.

Connect to a 12V direct current

(DC) power supply.

Alarm output COM

Applied for

alarm

function

Alarm output terminal

Alarm input COM

Alarm input terminal

Network

access port

Support PoE

supply.

Core Description Remark

Audio output

Power supply

(DC 12V)

Audio input

port

OUT

Reset PWR SD

2-1/4UNC x8

4-φ4.5

100

275

107

273~~303 ajuﬆable

Pedestrian direction

15°

If user requires higher

accuracy of personnel count,

we recommend the user to

install camera and draw the

line following a gure 2-4. s ﬁ

Figure 2 4 - Installation of personnel count

CAUT IO N

Deimos Pro Network Camera

5MP Vari-Focal Lens with

IR-Active Deterrence

Quick Setup Guide

Item no.: 0070-08215

Step 3 Turn on the camera, connect the monitor, adjust the

camera screen to the corresponding area. If user

need to adjust the position of the camera, he can

loosen the two-axis screws on bracket to manually

adjust the position. Then tighten the screws after

finishing adjustment, as shown in figure 3-2.

Step3 Click Login, the main page is displayed.

4.2 Modify IP address

Choose > > , the Conﬁguration Device Local Network Local

Network page is displayed.

Input the IP address in the IP Address box and click as Apply

shown in ﬁgure 4-2.

After the IP address is set successfully, please use the new IP

address to login the Web interface.

Figure 4 2 - Local Network

4.3 Browsing Video

To ensure the real-time video can be played properly, you muﬆ

perform the following operation when you login the web for the ﬁrﬆ

time. If you can vi the video immediately please ignore itew , .

Step 3 Download and install the player control as prompted.

If the repair tips displayed when installing the control, please

ignore the prompt, and continue the installation, close the

Web page during installing. Then login the page again.

Step 1 The Internet Explorer. Choose Tools Internet options > >

Security T > ruﬆed sites > , in the display dialog boxSites ,

click as shown in 4 3 , Add ﬁgure - .

Step 2 In the Internet Explorer, choose > > Tool Internet Options

Security Download unsigned > , and set Cuﬆomer level

ActiveX control initialize and script ActiveX and

controls not marked as safe for scripting under ActiveX

controls and plug-ins to enable, as shown in ﬁgure 4-4.

To browse a real-time video, login the device and click Live

Video. The Live Video page is displayed, as shown in figure

4-5.

User Name

Password

English

Figure 4 1 - Login

Figure 4 5 - Live Video

Figure 4 4- Configuring ActiveX control and plug-ins

Local Network

IP Prot ocol

DHCP

IP Addres s

Subnet M as k

Defau lt Gatewa y

Preferred DNS Serv er

Alt ernat e DNS Serv er

MTU (800-150 0)

Re fr es h Ap pl y

19 2. 16 8.0 .1 20

19 2. 16 8.0 .1

4.1 Login

Step 1 Open the Internet Explorer, enter the IP address of IP

camera (the default value: 192.168.0.120) in the address

box, and press Enter. The login page is displayed as

shown in ﬁgure 4-1.

Step Input the user name and password.2

Quick Configuration(e.g IE)

The default user name and password are both admin. Change the

password when you log into the syﬆem for the ﬁrﬆ time to ensure

syﬆem security.

You can change the syﬆem display language on the login page.

Figure 3 2 - Finish installation

NOTE

Figure 3-1 Installing bracket

The Bullet Network Camera can be installed on the ceiling

or wall. You can select an installation mode based on site

requirements. If the camera is installed on a concrete wall,

install the expansion bolts before installing the bracket. If the

camera is installed on a wooden wall, use self-tapping

screws to install the bracket directly.

NOTE

Figure 4 3 - Adding a trusted site

3Device Installation

NOTE

During installation, please take care of the waterproofness of

the bracket and line. Please make sure the head of line bend

down then go upward, avoid the water go along the line into

the bracket.

ŸThe wall where the support is mounted must be able to

withstand at least three times of the total weight of the support

and the camera.

ŸYou can route cables from the top or from the side. If you use

the top routing method, drill a hole in the surface first. If you use the

side routing method, please route the multi-head cable out from the

side gap at the bottom of the camera.

Installation Steps:

Step 1 Stick the Installation location sticker on the ceiling or

wall, drill four holes based on the marks on the

sticker. Drive the plastic anchors into the holes,

install the camera on the ceiling or wall, and fix the

screws as shown in figure 3-1.

Step 2 Connect the multi-connector cable.

Li ve V ide o Pl ay ba ck Pe rs onne l Count Co nf ig ur ati on

Not e: Activ eX is bei ng used t o play li ve vide o now

Swi tch to VL C, then p lay the v ideo

Swi tch to Pl ugin, t hen pla y the vid eo

St rea m

str eam 1

ht tp :// 19 2. 16 8. 0.1 20

1 Personnel Count: User can query the data of personnel count,

through year, month, day. The statistics can be downloaded. The

data can be shown by line chart, histogram, list.

2 AI Live video: Click the icon to view the snapshots of human face

or license plate (click “Face” or “Plate” to switch ).

The bottom page will show the captured images of vehicle and

human .

Parameter Description

Enable Enable the fence, draw the warning area at live

video by using mouse. The default status is

disable.

Sensitivity The sensitivity of the retrieval target, choose from

1 to5, 5 means the highest sensitivity, it will detect

the target easily.

Limit Target

Type

Enable the type can be chosen, person or car/ ,

person/car.

Output

Channel

Select to linkage camera’s relay output channel fo

“Intelligent Analysis Alarm”.

Audio Detect

Alarm

Enable, user can choose the audio file to play if it

happens alarm. The audio file can be set at “

Configuration > Alarm > Sound Alarm Output

”interface.

Flashing

Alarm

Enable, when the device detect target, it will be

flashing.

Alarm Record

Enable, if user set the parameters of email, it will

send email to user if it happens Intelligent Analysi

alarm.

SMTP Enable, if user set the parameters of FTP, it will

send snapshot to FTP server if it happens

Intelligent Analysis alarm.

FTP Upload Enable, if user set the parameters of FTP, it will

send snapshot to FTP server if it happens

Intelligent Analysis alarm.

Schedule Set valid time for all above Intelligent Analysis

settings.

Table 4 1- Parameters of Intelligent Analysis

Perimeter

Enable

Audio Det ect Alarm

Sound Alar m File

Flashligh t Ala rm

Se ns iti vi ty

Limit Tar get Ty pe

Ou tp ut Ch an ne l

Alarm Record

Cl ea r

Re fr es h

Ap ply

Sun

Sat

Fri

Thu r

Wed

Tue s

Mon

4.4 Set Intelligent Analysis

At “ ” interface to set theConﬁguration > Intelligent Analysis

parameters of intelligent analysis Perimeter Single Virtual Fence ( , , ,

Double Virtual Fences Multi Loiter Converse Personnel Count so , , , ),

that the user can receive the alarm of target as shown in 4 6 , ﬁgure -.

Figure 4 6 - Intelligent Analysis - Perimeter

4.5 AI Multi object

At “Configuration > AI Multi object” interface, user can enable face

detection, full body detection, vehicle detection, set the other

parameters of detection, as shown in figure 4-7.

Face Detect io n

Fullbody Detec tion

Vehi cle Detection

Display Trace Inf o

Sho w De tection Area

Confidenc e Coefficient

Face Pi xe l Mi n(30-300)

Body Pi xel Mi n(30-300)

Vehi cle Pixel Min(30-300)

Image Matti ng Quality

Snapshot Mode

Upload Image Interval(1-10s)

FTP Upload Im age Matting

FTP Upload Whol e Image

Algorithms Library Version

Figure 4 7 - AI Multi-object

NOTE

For better capture performance, it is recommended to use 6mm

focus length lens or above.

Specyfikacje produktu

Marka:	Ernitec
Kategoria:	Kamera monitorująca
Model:	0070-08215

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ernitec 0070-08215, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca Ernitec

Ernitec 0070-08117 Instrukcja

4 Października 2024

Ernitec Wolf Pro Instrukcja

3 Października 2024

Ernitec 0070-08112 Instrukcja

24 Września 2024

Ernitec 0070-08214 Instrukcja

24 Września 2024

Ernitec 0070-08215 Instrukcja

24 Września 2024

Ernitec 0070-08316 Instrukcja

24 Września 2024

Ernitec Orion DX 832 IR Instrukcja

22 Września 2024

Ernitec TAURUS DX 622 Instrukcja

22 Września 2024

Ernitec 0070-04344IR Instrukcja

22 Września 2024

Ernitec ORION DX 822IR Instrukcja

20 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs CCD-401C Instrukcja

15 Października 2024

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024

D-Link DCS-7510 Instrukcja

15 Października 2024

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024

Alecto DVC-215IP Instrukcja

13 Października 2024

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024