Instrukcja obsługi Erica Synths Pico Drum 2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Erica Synths Pico Drum 2 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Thank you for purchasing Erica Synths Pico Series module!
With Pico Series we challenged ourselves can we make ANY
superior functionality synth module 3HP wide and affordable?
Yes, we can.
Erica Pico DRUM 2 is compact yet versatile percussion synthesizer.
It features 8 distinct drum synthesis algorithms! Each algorithm has
3 adjustable parameters (the third typically is decay), ALL OF THEM CAN
BE MAPPED TO CV.
PICO
DRUM2
FEATURESTECHNICAL SPECS
8 percussion algorithms
3 parameters per algorithm
1V/oct tuning
CV control over all parameters
CV controlled algorithm switching
Input protection against overvoltage
Protection against reverse PSU connection
Output level 10Vptp
CV level (full span) -5V - +5V
Power consumption +28mA, -5mA
Module width 3HP
Module depth 35mm
DECAY
OUT
TRIGG
CV 2
CV 1
PARAM1
DRUM2
PICO
PARAM2
Use this knob to control the first
parameter of the algorithm! Refer to the
table below for feature assigned to each
algorithm! For most algorithms it
controls the pitch of the sound. At far
clockwise settings the module starts to
generate unexpected sonic artifacts - we
purposely let it work like that in order
to encourage creativity in sound design Use this knob to control
the second parameter of the
algorithm! Refer to the table
below for feature assigned to
each algorithm
This knob sets the VCA envelope decay
time. In full clockwise setting the VCA
is fully open, and you can use the
module as the regular sound source.
The RGB LED indicates currently
selected sound generation algorithm.
Refer to the table of algorithms and
parameter controls below! Also the
LED blinks with the incoming trigger
CV1 is the assignable CV input. The
incoming CV is added to the knob setting
CV2 is assigned to the PARAMETER1. The
incoming CV is added to the knob PARAM1
knob setting. This input also tracks
1V/Oct for some of the algorithms
This is the trigger input. It
accepts +5V 1 ms trigger
This is the audio output of
the module
Push the MODE button promptly
to switch among 8 algorithms.
Push and hold the button for 2
to enter configuration mode! LED
will start to blink. In
configuration mode you can
assign CV1 Input to one of the
parameters. To do so, push the
button repeatedly – blinking
Red LED means, the CV is assigned
to the PARAM2 knob, Green – to
DECAY, Blue – to algorithm
selection with CV.
To exit the configuration mode,
push and hold a button for 2”.
The LED will stop blinking
PICO
DRUM2
PULSE DRUM
FOLD DRUM 1
COMPLEX PULSE DRUM
COMPLEX SINE DRUM
SPACE SNARE
NOISE CRUSH
FOLD DRUM 2
SLAP
OSC TUNE
OSC TUNE
OSC 1 TUNE
OSC 1 TUNE
OSC TUNE
LP FILTER
OSC TUNE
FILTER
FM DECAY
FOLD AMOUNT/ FM DECAY
MOD OSC 2 TUNE
MOD OSC 2 TUNE
NOISE FILTER
BITCRUSH
FOLD AMOUNT
DRIVE
AMP DECAY
AMP DECAY
AMP DECAY
AMP DECAY
AMP DECAY
AMP DECAY
PITCH EG AMOUNT
AMP DECAY
Pulse wav
Sine wave
Param 2 c
Pulse wav
Sine wave
Sine wave
White nois
Sine wave
with some
controls
Stack of n
Table of algorithms
DECAY descriptPARAM2PARAM1ALGORITHM
PICO


Specyfikacje produktu

Marka: Erica Synths
Kategoria: nieskategoryzowany
Model: Pico Drum 2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Erica Synths Pico Drum 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Erica Synths

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024