Instrukcja obsługi Equip Pocket KVM Switches PS/2

Equip Inne akcesoria komputerowe Pocket KVM Switches PS/2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Equip Pocket KVM Switches PS/2 (16 stron) w kategorii Inne akcesoria komputerowe. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Table of Content
Introduction
Overview ... .1
Features . .2
Installations
Console Connection… . ...3
Computers Connection… . . .5
Initial Power-up . ..… .7
Operations
Front Panel operation ... ..… .8
Hot-key commands… ... ... .. .8
Appendices
Specifications .. 11
Troubleshooting… … … … … … … ...… … … … 12
Please read this manual thoroughly
and follow the Installation procedures to
prevent any damage to the KVM Switch
SW0206C, SW0207A, SW0407C, SW0408A
or any connecting device.
This device is tested and complies with Part 15 of
FCC/class B, CE and VCCI rules.
- - 1
----------------- Introduction
Overview
The KVM Switch SW0206C, SW0207A, SW0407C and
SW0408A are computer switches that allow access to
two or four IBM compatible computers from one PS/2
keyboard, mouse and monitor. Switching between
computers is as easy as pressing the push button or
entering hot-key commands from your keyboard. There
is no interface card and software to install and the switch
is independent of the computer operating system.
Ready to run right out of the box, this kit comes with
everything you need - a switch and complete cable sets,
just hook them up and go. By allowing one console to
manage all your computers, the SW0206C, SW0207A,
SW0407C and SW0408A eliminate the expense for extra
consoles, the spaces for extra peripherals and the time
hopping around for accessing different computers.
SW0207A allows one microphone and speaker to be
shared by two computers and SW0408A allows four.
- - 2
Features
nUnique loose-free cables included preventing
keyboard or mouse connector from getting loose.
nSupports PS/2 keyboard and mouse.
nKeyboard and mouse emulation for error-free PC boot
up.
nKeyboard and mouse are hot pluggable at any time
without turning either the switch or PCs off.
nSpace-saving design - all cables are connected to the
rear.
nAuto scan automatically selects computers
sequentially.
nSupports M/S IntelliMouse (Pro), Explorer, Optical.
nHot-key and push button allow easy computer
access.
nKeyboard states automatically saved and restored
when switching computers .
nOperating system and software independent,
transparent to all applications .
nHigh VGA resolution 1920x1440.
nDDC2B compatible.
nPower- -free operation the switch draws power from
the attached PCs.
nSW0207A and SW0408A support microphone and
speaker switching.
- - 3
-----------------Installation
Console Connection
Turn your computers off. Connect a PS/2 keyboard to
the mini- -DIN 6 port marked with a keyboard and a PS/2
mouse to the mini-DIN-6 port marked with a mouse.
Then connect your VGA monitor cable directly to the
HD- -DB 15 port as shown in figure 1 for 2-port KVM
Switch SW0206C.
Figure 1:KVM Switch SW0206C Console Connection

Specyfikacje produktu

Marka: Equip
Kategoria: Inne akcesoria komputerowe
Model: Pocket KVM Switches PS/2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Equip Pocket KVM Switches PS/2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Inne akcesoria komputerowe Equip

Instrukcje Inne akcesoria komputerowe

Najnowsze instrukcje dla Inne akcesoria komputerowe

Dell

Dell WD19DC Instrukcja

14 Października 2024
Lenco

Lenco IPT-223 Instrukcja

13 Października 2024
Goobay

Goobay 62106 Instrukcja

9 Października 2024
Goobay

Goobay 45835 Instrukcja

9 Października 2024
Goobay

Goobay 66255 Instrukcja

9 Października 2024
Urban Factory

Urban Factory TCD01UF Instrukcja

9 Października 2024
Kensington

Kensington SD1700P Instrukcja

9 Października 2024