Instrukcja obsługi Entrust Sigma DS1

Entrust drukarka Sigma DS1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Entrust Sigma DS1 (10 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
September 2023
528060-001, Rev E
User’s Guide
Sigma DS1, DS2, and DS3 Direct to Card Printers
ii
Notice
Please do not attempt to operate or repair this equipment without adequate
training. Any use, operation or repair you perform that is not in accordance with
the information contained in this documentation is at your own risk.
Trademark Acknowledgments
Entrust, Sigma and the hexagon design are trademarks, registered trademarks
and/or service marks of the Entrust Corporation in the United States and other
countries.
Datacard is a registered trademark and service mark of Entrust Corporation in
the United States and other countries.
MasterCard is a registered trademark of MasterCard International Incorporated.
Visa is a registered trademark of Visa International Service Association.
All other product names are the property of their respective owners.
Proprietary Notice
The design and information contained in these materials are protected by US
and international copyright laws.
All drawings and information herein are the property of Entrust Corporation. All
unauthorized use and reproduction is prohibited.
Entrust Corporation
1187 Park Place
Minneapolis, MN 55379
Phone: 952-933-1223
Fax: 952-933-7971
www.entrust.com
© 2020-2023 Entrust Corporation. All rights reserved.
iii
Safety
The following basic safety tips are given to ensure safe installation, operation and maintenance of
Entrust equipment.
Connect equipment to a grounded power source. Do not defeat or bypass the ground lead.
Place the equipment on a stable surface (table) and ensure floors in the work area are dry and
non-slip.
Know the location of equipment branch circuit interrupters or circuit breakers and how to turn
them on and off in case of emergency.
Know the location of fire extinguishers and how to use them. ABC type extinguishers may be
used on electrical fires.
Know local procedures for first aid and emergency assistance at the customer facility.
Use adequate lighting at the equipment location.
Maintain the recommended temperature and humidity range in the equipment area.
Safe Human Interface
Use proper lifting techniques when moving or installing the equipment.
Use standard electrostatic discharge (ESD) precautions when working on or near electrical
circuits.
Do not defeat or disconnect safety interlocks on covers.
Liability
The WARNING and CAUTION labels have been placed on the equipment for your safety. Please do
not attempt to operate or repair this equipment without adequate training. Any use, operation,
or repair in contravention of this document is at your own risk.
California Prop
Warning: This product contains chemicals, including lead, known to the State of California to
cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
For more information on this warning, refer to:
www.datacard.com/califpropwarning.
Warning: To avoid a possible electric shock, always unplug the system before servicing.


Specyfikacje produktu

Marka: Entrust
Kategoria: drukarka
Model: Sigma DS1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Entrust Sigma DS1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje drukarka Entrust

Instrukcje drukarka

Najnowsze instrukcje dla drukarka

Kyocera

Kyocera ECOSYS P2135dn Instrukcja

15 Października 2024
OKI

OKI C920WT Instrukcja

15 Października 2024
Brother

Brother DCP-J152W Instrukcja

15 Października 2024
Sharp

Sharp MX-M7570 Instrukcja

14 Października 2024
Ricoh

Ricoh P C300W Instrukcja

14 Października 2024
OKI

OKI MC851dn Instrukcja

13 Października 2024
Kyocera

Kyocera TASKalfa 8052ci Instrukcja

13 Października 2024
Epson

Epson Mobilink TM-P20II Instrukcja

13 Października 2024