Instrukcja obsługi Energenie MIHO033

Energenie Czujnik Deur/ramki MIHO033

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Energenie MIHO033 (2 stron) w kategorii Czujnik Deur/ramki. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Mi Home Open Sensor
User Guide
The Open Sensor is part of the |Home home Mi
automation range. This allows you to monitor
window and door openings.
The Open Sensor is suitable for frame mounting and
may be screwed or stuck in place with suitable
fixtures.
In the Box:
• Open Sensor unit (A)
& magnet (B)
• Mounting
accessories (C)
• 1 x AAA battery
Install the Battery
Remove the cover on the
compartment of the transmitter by carefully pulling
apart and insert the battery - observing the correct
battery polarity.
Mi|Home Network Installation - Pairing
Your Open Sensor needs to be paired with the
Mi|Home Gateway before it can be used. You can
pair your Open Sensor with the |Home Gateway Mi
before you actually physically install it.
Please ensure that your device is in range of the
Gateway when you pair it. We suggest up to 10
metres and as unobscured by furniture or walls etc.
as possible.
You have two options to pair your Open Sensor to
the Gateway: either via a bowser on a PC or smart
device, or via your smart device App.
You will need to have created an account and
already installed the |Home Gateway.Mi
Via a Browser:
Select the option to pair a new device and choose
the Open Sensor to be paired.
Follow the instructions to hold down the pairing
button on the unit until you see the device come up
on the screen as being paired.
Via the App:
Follow the instructions on the screen when you run
the App to pair the Open Sensor.
If you are having trouble with the range you may
need to move the Gateway closer to the transmitter
unit or move any intervening obstruction that may
aect the signal.
Using the Dashboard
You can view and control your paired device by
selecting the Dashboard option on your App or via
the browser.
Physical Location
Place the sensor in a suitable location as suggested
in the following image:
Secure the sensor parts in the appropriate locations
using the mounting accessories. This may take some
trial and
error to
find the
most
suitable
position.
Open Sensor Operation
When the two halves of the
device are separated. The
led lamp will blink red and
an open message will be
sent.
Moving the magnet back
close to the sensor unit will
cause a close message to
be sent.
Technical Specification
• Power supply: 1.5V (AAA alkaline battery)
• Battery life: 1 year - assuming 50 actions per day
• Operating temperature: -10 o +35˚C t ˚C
• Radio: 434.3 MHz, FSK
• Protocol: Openthings (One way)
• Output messages: Join, open, close
• Storage temperature: -30 to +70˚C ˚C
• Transmission range: 30m+ (open space)
• Mounting: Door or window frame, cw screws and
mounting accessories
• LED lamp: Red blink = open detected
Red blink twice = open detected and message
sent to |Home network.Mi
• Product Code: MIHO033
Troubleshooting
1. Any local source of radio noise may eect operation
of the radio system. This may include poorly regulated
fans or other devices running electric motors, noisy
power supplies or other low quality electrical and
electronic equipment including LED lights.
2. If your attempt to pair the transmitter unit and it
fails please try again. Occasionally the signals
between devices may be subject to noise or other
outside interference which is common for radio
systems of this nature.
3. The range of communication between your
Gateway and the device will be aected by anything in
between that may obscure the signal such as
furniture, walls, ceilings, windows, doors etc.
For further help please visit mihome4u.co.uk/
troubleshooting support@mihome4u.co.uk or email
Declaration of Conformity
Sandal Plc trading as Energenie declare under our
sole responsibility as importer that the product:
Model: MIHO033 is in accordance with the
following Directive(s):
2014/53/EC R&TTE Directive (Article 3.1b and
3.2)
2002/96/EC Waste Electrical and Electronic
Equipment (WEEE) Directive
2011/65/EU Restriction of the Use of Certain
Hazardous Substances (RoHS)
Directive Recast
The unit complies with all essential requirements of
the above referenced specifications and directives
and has been issued a CE mark as per directive
93/98/EEC.
The Technical Construction File required is
maintained at the company headquarters at 5
Harold Close, The Pinnacles, Harlow, Essex,
England, CM19 5TH.
Caution
Please be aware that any changes or modifications
not expressly approved in this user guide will void
the warranty on this equipment.
is a trademark belonging to Sandal Plc.
energenie4u.co.uk | mihome4u.co.uk
Energenie Mi Sandal and |Home are brand names of
Plc. Registered Oce: Claremont House, Deans
Court, Bicester, Oxon, OX26 6BW
Other Notices
THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT
DESIGNED, MANUFACTURED OR INTENDED FOR USE OR
RESALE FOR THE OPERATION OF NUCLEAR FACILITIES,
THE NAVIGATION, CONTROL OR COMMUNICATION
SYSTEMS FOR AIRCRAFT OR OTHER TRANSPORTATION,
AIR TRAFFIC CONTROL, LIFE SUPPORT OR LIFE SUSTAIN-
ING APPLICATIONS, WEAPONS SYSTEMS, OR ANY OTHER
APPLICATION IN A HAZARDOUS ENVIRONMENT, OR
REQUIRING FAIL-SAFE PERFORMANCE, OR IN WHICH THE
FAILURE OF PRODUCTS COULD LEAD DIRECTLY TO
DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR
ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK
APPLICATIONS"). YOU AGREE AND ACKNOWLEDGE THAT
YOU HAVE NO LICENSE TO, AND SHALL NOT (AND SHALL
NOT ALLOW A THIRD PARTY TO) USE THE PRODUCT IN
ANY HIGH RISK APPLICATIONS, AND WHERE PERMITTED
BY LAW SANDAL PLC SPECIFICALLY DISCLAIMS ANY
WARRANTY REGARDING, AND ANY LIABILITY ARISING OUT
OF, HIGH RISK APPLICATIONS.
© 2016 Sandal Plc.

Specyfikacje produktu

Marka: Energenie
Kategoria: Czujnik Deur/ramki
Model: MIHO033

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Energenie MIHO033, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Czujnik Deur/ramki Energenie

Energenie

Energenie MIHO033 Instrukcja

4 Lipca 2024

Instrukcje Czujnik Deur/ramki

Najnowsze instrukcje dla Czujnik Deur/ramki

EZVIZ

EZVIZ T1 Instrukcja

14 Października 2024
Schwaiger

Schwaiger HSA250 532 Instrukcja

9 Października 2024
Kidde

Kidde K10LLDCO Instrukcja

9 Października 2024
Kidde

Kidde 2030-DCR Instrukcja

9 Października 2024
ORNO

ORNO OR-SH-17600 Instrukcja

8 Października 2024
ORNO

ORNO OR-SH-17601 Instrukcja

8 Października 2024
Emos

Emos THS916A Instrukcja

7 Października 2024
Emos

Emos GS827 Instrukcja

7 Października 2024
Emos

Emos GS869 Instrukcja

7 Października 2024
Kanlux

Kanlux MARID JQ-L Instrukcja

7 Października 2024