Instrukcja obsługi Endorphin.es Squawk Dirty To Me

Endorphin.es Niesklasyfikowane Squawk Dirty To Me

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Endorphin.es Squawk Dirty To Me (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
audio in
in 1
WARRANTY
RTFM – be so kind and read the manual. It will provide you with the
information you need to fully indulge the module you just
purchased – for which we like to thank you.
Enjoy your sound experiences, dear sonic traveller.
Beginning from the product's purchase date a 1-year warranty is
guaranteed for each product
in case of any manufacturing errors or other functional
deficiencies during runtime.
The warranty does not apply in case of:
• damage caused by misuse
• mechanical damage arising from careless treatment
(dropping, vigorous shaking, mishandling, etc.)
• damage caused by liquids or powders penetrating the device
• heat damage caused by overexposure to sunlight or heating
• electric damage caused by improper connecting
The warranty covers replacement or repair, as decided by us.
Please contact us via email for a return authorization before
sending anything. Shipping costs of sending a module back for
servicing is paid by the customer.
Device complies with all EU regulations concerning RoHS lead-free
manufacturing and WEEE disposal
Endorphin.es are made in Barcelona, Spain
Visit us:
http://endorphin.es
https://youtube.com/user/TheEndorphines
https://facebook.com/TheEndorphines
https://www.instagram.com/endorphin.es/
Drop us a line:
info@endorphin.es
FURTH BARCELONA, S.L.
VAT ID:ES B66836487
IN CASE OF EMERGENCY SQUAWK 7700
• simple and effective 6hp stereo VCF
• 8 filter modes available with meta CV scanning,
famous zero-delay feedback Grand Terminal filters
• additional hi-pass filter in series quickly cuts the
boomy low end
• 48 kHz 16 bit digital audio stereo processing
Depth: 30mm (with plugged ribbon cable)
Power requirements: +12V: 120 mA
-12V: 15 mA
Power OFF you modular system:
Hold ‘mode’ while powering your system again:
You will see status LED
will blink blue:
WAV
Connect the audio output from your computer
headphones output to one of the audio inputs
of the module with simple mono or stereo cable
Press PLAY and wait 1.5 minutes.
The module will reboot automatically
after the new firmware was installed
mode
Make sure you don't input any extra
sounds during update process
(reminder signals from your calendar,
etc.). When status LED flashes RED –
that means signal is too low or too high
– just reset the firmware aquire process
by pressing MODE once.
Download latest firmware/bank
when available from:
http://airways.endorphin.es
mode
FIRMWARE UPDATE
Red/brown pair
or wires correspond
to a negative -12V
power connector.
Connect to the
power bus board.
Rear side of the module
Connect to
the module
from the
backside.
POWER CONNECTION
-12V / red stripe
polarity marking
hold
for
meta
cv in
VCA cv in
hpf
mode
cv in
SQWK DIRTY
I
out 1 out 2
in 1 in 2
II III IV
audio
audio
V VI VII VIII
cv in
Audio inputs:
input 1 internally
connected to input 2,
if nothing is
plugged into input 2
Filter outputs
Cutoff frequency control with CV
sets the frequency peak where
filter starts to cut
Resonance control and CV
adjusts the emphasis
(resonance peak) of the
frequency, or in some other
cases bandwidth,
vactrols’ decay etc..
Manual cutoff, resonance
and hpf knobs act
as attenuators when
a CV signal is is applied
to the cv inputs.
Pressing the MODE button shortly
cycles thru all filter types.
Long MODE press enables
meta filter scannin.
Unattenuated CV input
for VCA (post-filter):
range 0...+5v
Attenuator for CV
for high-pass filter
CV input for hpf:
range 0...+5v
Status LED used for
update etc.
4 white LEDs show currently
chosen one of 8 filters:
• when LED is semi LIT, then it
shows one of V...IV chosen filter types
• when LED is full LIT, then it
shows one of I...IV chosen filter types
ENDORPHIN.ES® – SQUAWK DIRTY TO ME
Module design by Andreas Zhukovsky
Collection Spring/Summer 2019
Made in Barcelona
Special thanks to Xavier Galai
for additional code and crazy ideas.
Follow, like, post and tag us at instagram:
endorphin.es
or contact us:
info@endorphin.es
cv in
cv in
Meta CV input,
0...+5V range
mode
reso-
nance
cutoff freq
Attenuverter a.k.a. polarizer
for incoming meta CV
Filter type
I to VIII selection
manual offset
Unattenuated
filter cutoff
CV input,
0...+5V range
III
Amount of polarized CV
is added to manual offset type.
I IVII III
V VI VII VIII
0 V 0,625 V 1,25 V 2,5 V
5 V4,375 V3,75 V3,125 V
Approximate table of voltages
which correspond to chosen
filter types.
Offset is set to filter I and
CV polarizer is set to
full CW position.
META META META META META META META META
Press 1 second to enable meta scanning.
cutoff freq
resonance
audio in
in 1
in 2
hi-pass filter
hi-pass filter
multi-mode filter
8 types: I....VIII
multi-mode filter
8 types: I....VIII
mode
out 1
out 2
audio out
in1_trim
Manual hi-pass, resonance and cutoff knobs
act as attenuators when the plugs are inserted.
Input 1 internally connected,
or so-called ‘normalled’ to input 2
when nothing is plugged into input 2.
Hi-pass filters in series before the main
filter to cut the low boomy end
All CV inputs range: 0...+5V
Final
AC-coupled
audio outputs
Audio inputs adjustment level on the backside:
modular level input at CCW or line level at CW
in2_trim
VCA
VCA
VCA cv in
Unattenuated CV input
for VCA control: range 0...+5v
• zero-delay feedback low-pass filter: Modelled24 DB/OCT TRANSISTOR LADDER
after the famous Minimoog filter.
• zero-delay feedback OTA-low-pass filter: MS-20 12 DB/OCT
Be careful, that filter has very powerful and dirty resonance.
• , non-resonant zero-delay feedback filter where instead12 DB/OCT LO-PASS GATE
of the resonance, we control the DECAY closing time of the virtual vactrol.
While ‘pinging’ Cutoff CV with a short pulse of voltage and adjusting the decay
will give us that distinct ‘Buchla Bongo’ sound.
• – variation of the zero-delay feedback vactrol12 DB/OCT RESONANT LO-PASS GATE
filter model III with fixed fast decay and full control over the resonance.
The resonance of the sound is ringing, just as it may be expected from a typical LPG.
• zero-delay feedback state-variable filter:12 DB/OCT DJ ISOLATOR-STYLE BIPOLAR
Sound is unfiltered when the Cutoff knob is in the middle/noon position. It filters high
frequencies/low-pass, when turning the knob CCW and filters low frequencies/hi-pass,
when turning the knob CW from its middle position.
• 12 DB/OCT HIGH-PASS STATE-VARIABLE FILTER:
(zero delay feedback), single hi-pass on full knob range
• zero-delay feedback filter with ‘cutoff’ knob 12 DB/OCT BAND-PASS STATE VARIABLE
you choose band’s centre point and with Resonance knob the width of the band.
• : It recreates a series of harmonically related amounts of notch filters.COMB FILTER
In static state, it sounds similar to a phaser, but with modulation applied to the frequency
it comes closer to a flanger.
I IVII III
V VI VII VIII When LED is semi LIT, it shows one of V...IV chosen filter modes.
When LED is full LIT, it shows one of I...IV chosen filter modes.
Only one filter mode (type) available at once.
mode
Pressing the ‘mode’ button shortly
cycles thru all 8 filter mode.
FILTER MODES
SIMPLE MONO OPERATION
audio in
audio out
audio in
out 1 out 2
audio out
Filtered audio out
to mixer, FX, etc.
Waveform from
the VCO i.e
Furthrrrr Generator,
mono source
MONO TO STEREO OPERATION
Waveform from
the VCO (mono)
internally
normalled to ‘in 2’
Separate
filtered outputs:
‘out 1’ (left) and
‘out 2’ (right)
TRUE STEREO OPERATION
audio in
Separately filtered outputs:
‘out 1’ (left) and ‘out 2’ (right)
Routed into a stereo module
(i.e. Mutable Instruments
Clouds) Separately routed inputs:
‘in 1’ (left) and ‘in 2’ (right)
in 1
out 1 out 1 out 2
audio out
in 1 in 2
in 1 in 2
out 1 out 2
audio out
audio in
in 1in 1 in 2
out 1 out 2
audio out
QUICK AND DIRTY PATCH EXAMPLE
cv in
cv in
reso-
nance
cutoff freq
VCO acts as an audio source
(i.e. even/odd output from Godspeed )
Unipolar output of the envelope
modulates the filter cutoff
or alternatively a VCA.
Adjust to approx. 12 o'clock
to listen the filter's action.
Adjust resonance
to own taste.
Adjust to 12'clock
and then return back
to full CCW in offbeat
moments.
VCA cv in
‘Note on gate’ from
the sequencer
1v/oct
audio in
in 1in 1 in 2
Routing filter
outputs to
the effect
processor
(i.e. Milky Way).
Left/right outputs
to the mixer or PA
normalization ‘in1’ into ‘in2’
1V/oct
pitch CV from
the sequencer

Specyfikacje produktu

Marka: Endorphin.es
Kategoria: Niesklasyfikowane
Model: Squawk Dirty To Me

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Endorphin.es Squawk Dirty To Me, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Endorphin.es

Endorphin.es

Endorphin.es Airstreamer Instrukcja

16 Września 2024
Endorphin.es

Endorphin.es Ground Control Instrukcja

15 Września 2024
Endorphin.es

Endorphin.es Futhrrrr Generator Instrukcja

15 Września 2024
Endorphin.es

Endorphin.es Godspeed Instrukcja

14 Września 2024
Endorphin.es

Endorphin.es Blck_Noir Instrukcja

12 Września 2024
Endorphin.es

Endorphin.es Furthrrrr Instrukcja

12 Września 2024
Endorphin.es

Endorphin.es Godspeed Thru-Godspeed+ Multi-Output VCO Module Instrukcja

12 Września 2024
Endorphin.es

Endorphin.es Power Instrukcja

11 Września 2024
Endorphin.es

Endorphin.es Squawk Dirty To Me Instrukcja

11 Września 2024
Endorphin.es

Endorphin.es Two Of Cups Instrukcja

11 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024