Instrukcja obsługi Emko ESM-3712-HCN
Emko
kontroler temperatury
ESM-3712-HCN
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emko ESM-3712-HCN (64 stron) w kategorii kontroler temperatury. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/64
ESM-3712-HCN 77x35 DIN Size Temperature Controller
Instruction Manual. ENG ESM-3712-HCN 01 V03 10/19
- 4 Digits Display
- NTC Input or
PTC Input or
(Must be determined in order.)
-
-
- Operation selection of compressor operates continuously,
stops or operates periodically in case of sensor defect
- Compressor protection delays
- Alarm parameters
-
- Password protection for programming section
- Installing parameters using Prokey
- Remote access, data collecting and controlling with Modbus RTU
- Having CE mark according to European Norms
J Type thermocouple Input or,
K Type thermocouple Input or,
2-Wire PT-100 Input or,
2-Wire PT-1000 Input
ON/OFF temperature control
2 output for compressor and alarm controls
- Selectable heating or cooling function
- Selection of operation with hysteresis
- Adjustable temperature offset
- Process Set value and Alarm Set value low limit and set value
high limit boundaries
- Adjustable Alarm Set Value from front panel
Adjustable internal buzzer according to Sensor prob defect and
Alarm status
ESM- 77 x 35 DIN Size3712-HCN
Digital ON / OFF Temperature
Controller (ALARM+SET)
ENGLISH
ENGLISH
ENGLISH
ENGLISHENGLISH
Operating Temperature : 0 to 50 °C
Max. Operating Humidity : 90% Rh (non-condensing)
Altitude : Up to 2000 m.
Forbidden Conditions:
Corrosive atmosphere
Explosive atmosphere
Home applications (The unit is only for industrial applications)
c
1.2 General Specifications
1.Preface
ESM-3712HCN series temperature controllers are designed for measuring and controlling
temperature. They can be used in many applications with their On / Off control form, heating
and cooling control form and easy-use properties. Some application fields which they are
used are below:
Application Fields Applications
Glass Heating
Food Baking Ovens
Plastic Incubators
Petro-Chemistry Storages
Textile, Automative Air Conditioning
Machine Production Industries Etc... Etc...
ESM-3712-HCN
2
Heating or Cooling
Function
ON/OFF Operation
1.1 Environmental Ratings
Alarm Control Output
ON/OFF Operation
Compressor Output
Alarm Output
Power Supply
Input
Temperature Sensor
Input
NTC, PTC,
J or K Type TC
2-Wire PT-100
2-Wire PT-1000
230V ( %15) 50/60HzV ±
Optional Supply Voltage
- 30 V Z
115 V ( %15) 50/60Hz,±
24 V ( %15) 50/60Hz,±
24 V ( %15) 50/60Hz,±
10
V
V
W
Standard
3
A visual inspection of this product for possible damage occurred during shipment is
recommended before installation. It is your responsibility to ensure that qualified mechanical
and electrical technicians install this product.
If there is danger of serious accident resulting from a failure or defect in this unit, power off the
system and separate the electrical connection of the device from the system.
The unit is normally supplied without a power supply switch or a fuse. Use power switch and fuse
as required.
Be sure to use the rated power supply voltage to protect the unit against damage and to prevent
failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble with the
unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may results in
malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During putting equipment in hole on the metal panel while mechanical installation some metal
burrs can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s fixing clamps. Do not do the montage
of the device with inappropriate fixing clamp. Be sure that device will not fall while doing the
montage.
It is your responsibility if this equipment is used in a manner not specified in this instruction
manual.
EMKO Elektronik warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is provided for a period of two years. The warranty period starts
from the delivery date. This warranty is in force if duty and responsibilities which are determined
in warranty document and instruction manual performs by the customer completely.
Repairs should only be performed by trained and specialized personnel. Cut power to the
device before accessing internal parts.
Do not clean the case with hydrocarbon-based solvents (Petrol, Trichlorethylene etc.). Use of
these solvents can reduce the mechanical reliability of the device. Use a cloth dampened in
ethyl alcohol or water to clean the external plastic case.
1.3 Installation
1.4 Warranty
1.5 Maintenance
1.6 Manufacturer Company
Manufacturer Information:
Emko Elektronik Sanayi ve Ticaret A.Ş.
Demirtaş Organize Sanayi Bölgesi Karanfil Sk. No:6 16369 BURSA/TURKEY
Phone : +90 224 261 1900
Fax : +90 224 261 1912
Repair and maintenance service information:
Emko Elektronik Sanayi ve Ticaret A.Ş.
Demirtaş Organize Sanayi Bölgesi Karanfil Sk. No:6 16369 BURSA /TURKEY
Phone : +90 224 261 1900
Fax : +90 224 261 1912
Specyfikacje produktu
| Marka: | Emko |
| Kategoria: | kontroler temperatury |
| Model: | ESM-3712-HCN |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Emko ESM-3712-HCN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kontroler temperatury Emko
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
29 Września 2024
20 Września 2024
Instrukcje kontroler temperatury
- kontroler temperatury Voltcraft
- kontroler temperatury Honeywell
- kontroler temperatury Techno Line
- kontroler temperatury Fluke
- kontroler temperatury Inkbird
- kontroler temperatury Kathrein
- kontroler temperatury JUNG
- kontroler temperatury Wachendorff
- kontroler temperatury AstralPool
- kontroler temperatury Ventus
- kontroler temperatury Technoline
- kontroler temperatury Davis
- kontroler temperatury Bulex
- kontroler temperatury Ygnis
- kontroler temperatury Jumo
Najnowsze instrukcje dla kontroler temperatury
7 Października 2024
29 Września 2024
29 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024