Instrukcja obsługi Elix 24.171

Elix Wentylator 24.171

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elix 24.171 (17 stron) w kategorii Wentylator. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
INSTRUCTION MANUAL
16 INCH DESK FAN
MODEL NO.: 24.171
READ AND SAVE THESE SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
220-240V 50Hz 45W
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Use this fan only as described in this manual. Other use not
recommended may cause fire, electric shock or injury to persons.
2. This product is intended for household use ONLY and not for
industrial or outdoor use.
3. To protect against electric shock, do not place fan in window,
immerse unit, plug or cord in water or spray with liquids.
4. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. DO NOT attempt to defeat
this safety feature.
5. Close supervision is necessary when any appliance is used by or
near children.
6. Press the OFF button and unplug the fan from the outlet when not in
use, when moving the fan from one location to another and before
cleaning.
7. To disconnect the fan, first press the OFF button, grip the plug and
pull it from the wall outlet. Never pull by the cord.
8. Do not operate the fan in the presence of explosive and/or
flammable fumes.
9. Do not place the fan or any parts near an open flame, cooking or
other heating appliance.
10. Do not operate the fan with a damaged cord or plug or if the
product malfunctions, is dropped or damaged in any manner (see
warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the manufacture may
be hazardous.
13. Place the fan on a dry, level surface.
14. Do not hang or mount fan on a wall or ceiling.
15. Do not operate if the fan housing is removed or damaged.
16. A loose fit between the AC outlet (receptacle) and plug may cause
overheating and a distortion of the plug. Contact a qualified electrician
to replace loose or worn outlet.
Drawing:
1. Front Grill 8. Screws
2. Blade 9. Spinner (Blade Knob)
3. Plastic Nut 10. Base
4. Rear Grill 11. Speed Control Buttons
5. Motor Shaft 12. Tighten - turn to left
6. Oscillation Knob 13. Loosen - turn to right
7. Fan Body
PART 1:
1. Insert the Fan Body assembly into the base.
2. Secure by putting the 4pcs of screws provided into the holes under
the base cover.
3. Tighten the screws fully in the base but do not over tighten.
PART 2: ASSEMBLY
1. Unscrew the spinner (blade knob) clockwise and the nut counter
clockwise and remove both of them.
2. Set the rear grill in the proper position with the handle up.
3. Screw on plastic nut tightly to attach rear grill.
4. Discard plastic sleeve on shaft.
5. Install the blade onto the shaft until the retaining pin fits into the
notch on the blade.
6. Screw spinner (blade knob) to the motor shaft counter clockwise
(tighten by turning to the left)
7. Mount onto by hanging the top hookFront Safety Grill Rear Grill
clip of front
guard over the top of the . Tighten the safety screw andRear Grill
close the clasps all around the grill.
PART 3: BOPERATION
• Place your fan on a level and dry surface.
• Plug the power cord into AC220-240V wall outlets.
Speed Control
Speed is controlled by the button switch.


Specyfikacje produktu

Marka: Elix
Kategoria: Wentylator
Model: 24.171

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Elix 24.171, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wentylator Elix

Elix

Elix 24.171 Instrukcja

15 Września 2024

Instrukcje Wentylator

Najnowsze instrukcje dla Wentylator